SQL-Server: The backup set holds a backup of a database other than the existing
Sql ServerSql Server Problem Overview
I am trying to restore a SQL Server backup file for my database, but it is throwing an error as follow:
> The backup set holds a backup of a database other than the existing
My database in SQL Server 2008 and the backup file is in 2005.
What can be the problem?
Sql Server Solutions
Solution 1 - Sql Server
I too came across this issue.
Solution :
- Don't create an empty database and restore the
.bak
file on to it. - Use 'Restore Database' option accessible by right clicking the "Databases" branch of the SQL Server Management Studio and provide the database name while providing the source to restore.
- Also change the file names at "Files" if the other database still exists. Otherwise you get "The file '...' cannot be overwritten. It is being used by database 'yourFirstDb'".
Solution 2 - Sql Server
Either:
-
Use
WITH REPLACE
while using theRESTORE
command (if using the GUI, it is found under Options -> Overwrite the existing database (WITH REPLACE
)). -
Delete
the older database which is conflicting and restore again usingRESTORE
command.
Check the link for more details.
Solution 3 - Sql Server
First create a blank database of the same name. Then go for the restore option
Under Options on the left pane don't forget to select
- Overwrite the existing database
- Preserve the replication settings
That's it
Solution 4 - Sql Server
Have facing same problem and found the solution by doing this, using SSMS 2014
- Just select the Option Overwrite the existing database(WITH REPLACE)
Solution 5 - Sql Server
USE [master];
GO
CREATE DATABASE db;
GO
CREATE DATABASE db2;
GO
BACKUP DATABASE db TO DISK = 'c:\temp\db.bak' WITH INIT, COMPRESSION;
GO
RESTORE DATABASE db2
FROM DISK = 'c:\temp\db.bak'
WITH REPLACE,
MOVE 'db' TO 'c:\temp\db2.mdf',
MOVE 'db_log' TO 'c:\temp\db2.ldf';
Solution 6 - Sql Server
This causes always due to version incompatibility. follow these steps to solve:
Step 1: Create a database with your preferred name. (In our case AdventureWorks)
Step 2: Write click on the database and click on Tasks >> Restore >> Database…
Step 3: On the restore screen go to third selection of Options. Now select the checkbox “Overwrite the existing database (WITH REPLACE)”
Step 4: Click OK. It should successfully restore the database.
Note: When you restore a database WITH REPLACE it will overwrite the old database.
Solution 7 - Sql Server
Simple 3 steps:
1- Right click on database → Tasks → restore → Database
2- Check Device
as source and locate .bak (or zipped .bak) file
3- In the left pane click on options
and:
- check Overwrite the existing database.
- uncheck Take tail-log backup before restore
- check Close existing connection to destination database.
Other options are really optional (and important of course)!
Solution 8 - Sql Server
If you are using the script approach and have an error concerning the LDF and MDF files, you can first query the the backup file for the logical names (and other details) of files in the backup set, using the following:
-- Queries the backup file for the file list in backup set, where Type denotes
-- type of file. Can be L,D,F or S
-- info: https://docs.microsoft.com/en-us/sql/t-sql/statements/restore-statements-filelistonly-transact-sql
RESTORE FILELISTONLY FROM DISK = 'C:\Temp\DB_backup.bak'
GO
You will get results similar to the following:
And then you can use those logical names in the queries:
-- Script assumes you want MDF and LDF files restored on separate drives. Modify for your scenario
RESTORE DATABASE DB
FROM DISK='C:\Temp\DB_backup.bak'
WITH REPLACE,
MOVE 'DB' TO 'E:\MSSQL\Data\DB.mdf', -- "DB" is the mdf logical name from query above
MOVE 'DB_log' TO 'F:\MSSQL\Logs\DB.ldf'; -- "DB_log" is LDF logical name from query above
More info on RESTORE FILELISTONLY
can be found from the SQL Server docs.
Solution 9 - Sql Server
Its because the .mdf
and .ldf
Files from the original Db
were locate at maybe c:\programFile\....
and this info is saved in the Backup!
If you create the same DB on a different SQL Server where the installation is on c:\program Files (x86)\ ....
you can not restore as usually. You need to relocate the path for .mdf
and .ldf
Files.
Therefore:
-
Create a empty DB on the new Server
-
Right click on the empty Db > Tasks > Restore > Database > click Device select your
.bak
Files > Select Db to restore into -
click on Files at left side > Select "Relocate all Files to Folder"
-
click Options on the left site > click on Overwrite
Done!
Hope it helps!
Solution 10 - Sql Server
I had ran into similar problem today. Tried all the above solutions but didn't worked. So posting my solution here.
> Don't forget to uncheck Tail-long Backup before restore
Hope it help others too!
Solution 11 - Sql Server
Also as important is to make sure that, your database name matches the data base name in the backup you are trying to restore. If it does not match, you will get the same error.
Solution 12 - Sql Server
> system.data.sqlclient.sqlerror:The backup set holds a backup of a database other than the existing 'Dbname' database
I have came across to find soultion
-
Don't Create a database with the same name or different database name !Important.
-
right click the database | Tasks > Restore > Database
-
Under "Source for restore" select "From Device"
-
Select .bak file
-
Select the check box for the database in the gridview below
-
To DataBase: "Here You can type New Database Name" (Ex:DemoDB)
-
Don't select the Existing Database From DropDownlist
-
Now Click on Ok Button ,it will create a new Databse and restore all data from your .bak file .
you can get help from this link even
Hope it will help to sort out your issue...
Solution 13 - Sql Server
Before doing anything else, confirm if your backup is Full or Differential. If you're trying to create a new database out of a differential backup, no matter what you do you will encounter the error.
Solution 14 - Sql Server
Same issue with me.The solution for me is:
- Right click on the database.
- Select tasks, select restore database.
- Click options on the left hand side.
- Check first option OverWrite the existing database(WITH REPLACE).
- Go to General, select source and destination database.
- Click OK, that's it
Solution 15 - Sql Server
I was just trying to solve this issue.
I'd tried everything from running as admin through to the suggestions found here and elsewhere; what solved it for me in the end was to check the "relocate files" option in the Files property tab.
Hopefully this helps somebody else.
Solution 16 - Sql Server
Some of you have highly over complicated this. I found this to be extremely simple.
-
Create a database with the same name as your .bak file database name !Important
-
right click the database | Tasks > Restore > Database
-
Under "Source for restore" select "From Device"
-
Select .bak file
-
Select the check box for the database in the gridview below
-
Under "Select a Page" on the right Select "Options"
-
Select the checkbox labeled "Preserve the replication settings(WITH KEEP_REPLICATION)
Now Go back to the General page and click OK to restore the database...That is it.
Solution 17 - Sql Server
I had to create new db on my local for testing & i had a back up from my prod. I created the db first and tried to run the BAK on top of the new db which produced this error for me. I deleted the db and restored it while sourcing the new db name in the restore screen itself. The db was automatically created on restore.
Solution 18 - Sql Server
I got work done through alternate way, using Generate scripts. That did work for me as Backup-Restore didn't help to resolve the issue due to same error.
Solution 19 - Sql Server
In the Options, change the "Restore As" file name to the new database mdf and ldf. It is referencing the source database .mdf and .ldf files.
Solution 20 - Sql Server
You can restore to a new DB, verify the file name syntax, it ll be in the log file, for the new SQL version ll be a "_log" suffix
ad check the overwrite the existing database flag in option tab
Fabio
Solution 21 - Sql Server
This helped me to import the back-up file from the system drive
- Create a database with the same name(preferably) as your .bak file database name
- Right click the database > Tasks > Restore > Database
- Under "Source for restore" select "From Device"
- Select the .bak file selecting the path from the system
- Select the check box for the database in the list box below
- Under "Select a Page" on the right Select "Options"
- Select the checkbox labeled "Preserve the replication settings(WITH KEEP_REPLICATION)
- Select the checkbox for Overwrite the existing database(WITH REPLACE) Now Go back to the General page and click OK to restore the database...
Solution 22 - Sql Server
Im sure this problem is related to the files and folders permissions.
Solution 23 - Sql Server
I was trying to restore a production database to a staging database on the same server.
The only thing that worked in my case was restore to a new blank database. This worked great, did not try to overwrite production files (which it would if you just restore production backup file to existing staging database). Then delete old database and rename - the files will keep the new temp name but in my case that is fine.
(Or otherwise delete the staging database first and then you can restore to new database with same name as staging database)
Solution 24 - Sql Server
instead of click on Restore Database click on Restore File and Filegroups..
thats work on my sql server
Solution 25 - Sql Server
I had the same issue but on PS. I leave it here in case someone is trying to do the same
Restore-SqlDatabase -ServerInstance "<your instance name>" -Database "<your db name>" -BackupFile "<backup file route>.bak" -ReplaceDatabase
remember to use Set-ExecutionPolicy Unrestricted -Force
and import import-module sqlps
. Don't forget to set back your Execution Policy back to restricted once you are done.
Solution 26 - Sql Server
Usually dealing with .bak files are coming with headaches, a more straight forward way is using sqldump files to transfer databases.
- Generate script of current database you want to move or copy.
- Instead of entire database, select All Tables.
- From the option menu choose save as script, and click on advance button and set the following configs (I am suing MSSQL 2016):
- Now, where you want to import these data, create a new database, switch to this new database (I mean set it as default)
- Finally run the script, all table and data will be imported.
Good Luck.
- List item