String length in bytes in JavaScript

Javascript Problem Overview

In my JavaScript code I need to compose a message to server in this format:

<size in bytes>CRLF
<data>CRLF

Example:

3
foo

The data may contain unicode characters. I need to send them as UTF-8.

I'm looking for the most cross-browser way to calculate the length of the string in bytes in JavaScript.

I've tried this to compose my payload:

return unescape(encodeURIComponent(str)).length + "\n" + str + "\n"

But it does not give me accurate results for the older browsers (or, maybe the strings in those browsers in UTF-16?).

Any clues?

Update:

Example: length in bytes of the string ЭЭХ! Naïve? in UTF-8 is 15 bytes, but some browsers report 23 bytes instead.

Javascript Solutions

Solution 1 - Javascript

Years passed and nowadays you can do it natively

(new TextEncoder().encode('foo')).length

Note that it's not supported by IE (you may use a polyfill for that).

MDN documentation

Standard specifications

Solution 2 - Javascript

~~There is no way to do it in JavaScript natively.~~ (See Riccardo Galli's answer for a modern approach.)

For historical reference or where TextEncoder APIs are still unavailable.

If you know the character encoding, you can calculate it yourself though.

encodeURIComponent assumes UTF-8 as the character encoding, so if you need that encoding, you can do,

function lengthInUtf8Bytes(str) {
  // Matches only the 10.. bytes that are non-initial characters in a multi-byte sequence.
  var m = encodeURIComponent(str).match(/%[89ABab]/g);
  return str.length + (m ? m.length : 0);
}

This should work because of the way UTF-8 encodes multi-byte sequences. The first encoded byte always starts with either a high bit of zero for a single byte sequence, or a byte whose first hex digit is C, D, E, or F. The second and subsequent bytes are the ones whose first two bits are 10. Those are the extra bytes you want to count in UTF-8.

The table in wikipedia makes it clearer

Bits        Last code point Byte 1          Byte 2          Byte 3
  7         U+007F          0xxxxxxx
 11         U+07FF          110xxxxx        10xxxxxx
 16         U+FFFF          1110xxxx        10xxxxxx        10xxxxxx
...

If instead you need to understand the page encoding, you can use this trick:

function lengthInPageEncoding(s) {
  var a = document.createElement('A');
  a.href = '#' + s;
  var sEncoded = a.href;
  sEncoded = sEncoded.substring(sEncoded.indexOf('#') + 1);
  var m = sEncoded.match(/%[0-9a-f]{2}/g);
  return sEncoded.length - (m ? m.length * 2 : 0);
}

Solution 3 - Javascript

Here is a much faster version, which doesn't use regular expressions, nor encodeURIComponent():

function byteLength(str) {
  // returns the byte length of an utf8 string
  var s = str.length;
  for (var i=str.length-1; i>=0; i--) {
    var code = str.charCodeAt(i);
    if (code > 0x7f && code <= 0x7ff) s++;
    else if (code > 0x7ff && code <= 0xffff) s+=2;
    if (code >= 0xDC00 && code <= 0xDFFF) i--; //trail surrogate
  }
  return s;
}

Here is a performance comparison.

It just computes the length in UTF8 of each unicode codepoints returned by charCodeAt() (based on wikipedia's descriptions of UTF8, and UTF16 surrogate characters).

It follows RFC3629 (where UTF-8 characters are at most 4-bytes long).

Solution 4 - Javascript

For simple UTF-8 encoding, with slightly better compatibility than TextEncoder, Blob does the trick. Won't work in very old browsers though.

new Blob(["😀"]).size; // -> 4

Solution 5 - Javascript

This function will return the byte size of any UTF-8 string you pass to it.

function byteCount(s) {
    return encodeURI(s).split(/%..|./).length - 1;
}

Source

Solution 6 - Javascript

Another very simple approach using Buffer (only for NodeJS):

Buffer.byteLength(string, 'utf8')

Buffer.from(string).length

Solution 7 - Javascript

I compared some of the methods suggested here in Firefox for speed.

The string I used contained the following characters: œ´®†¥¨ˆøπ¬˚∆˙©ƒ∂ßåΩ≈ç√∫˜µ≤

All results are averages of 3 runs each. Times are in milliseconds. Note that all URIEncoding methods behaved similarly and had extreme results, so I only included one.

While there are some fluctuations based on the size of the string, the charCode methods (lovasoa and fuweichin) both perform similarly and the fastest overall, with fuweichin's charCode method the fastest. The Blob and TextEncoder methods performed similarly to each other. Generally the charCode methods were about 75% faster than the Blob and TextEncoder methods. The URIEncoding method was basically unacceptable.

Here are the results I got:

Size 6.4 * 10^6 bytes:

Lauri Oherd – URIEncoding:     6400000    et: 796
lovasoa – charCode:            6400000    et: 15
fuweichin – charCode2:         6400000    et: 16
simap – Blob:                  6400000    et: 26
Riccardo Galli – TextEncoder:  6400000    et: 23

Size 19.2 * 10^6 bytes: Blob does kind of a weird thing here.

Lauri Oherd – URIEncoding:     19200000    et: 2322
lovasoa – charCode:            19200000    et: 42
fuweichin – charCode2:         19200000    et: 45
simap – Blob:                  19200000    et: 169
Riccardo Galli – TextEncoder:  19200000    et: 70

Size 64 * 10^6 bytes:

Lauri Oherd – URIEncoding:     64000000    et: 12565
lovasoa – charCode:            64000000    et: 138
fuweichin – charCode2:         64000000    et: 133
simap – Blob:                  64000000    et: 231
Riccardo Galli – TextEncoder:  64000000    et: 211

Size 192 * 10^6 bytes: URIEncoding methods freezes browser at this point.

lovasoa – charCode:            192000000    et: 754
fuweichin – charCode2:         192000000    et: 480
simap – Blob:                  192000000    et: 701
Riccardo Galli – TextEncoder:  192000000    et: 654

Size 640 * 10^6 bytes:

lovasoa – charCode:            640000000    et: 2417
fuweichin – charCode2:         640000000    et: 1602
simap – Blob:                  640000000    et: 2492
Riccardo Galli – TextEncoder:  640000000    et: 2338

Size 1280 * 10^6 bytes: Blob & TextEncoder methods are starting to hit the wall here.

lovasoa – charCode:            1280000000    et: 4780
fuweichin – charCode2:         1280000000    et: 3177
simap – Blob:                  1280000000    et: 6588
Riccardo Galli – TextEncoder:  1280000000    et: 5074

Size 1920 * 10^6 bytes:

lovasoa – charCode:            1920000000    et: 7465
fuweichin – charCode2:         1920000000    et: 4968
JavaScript error: file:///Users/xxx/Desktop/test.html, line 74: NS_ERROR_OUT_OF_MEMORY:

Here is the code:

function byteLengthURIEncoding(str) {
  return encodeURI(str).split(/%..|./).length - 1;
}

function byteLengthCharCode(str) {
  // returns the byte length of an utf8 string
  var s = str.length;
  for (var i=str.length-1; i>=0; i--) {
    var code = str.charCodeAt(i);
    if (code > 0x7f && code <= 0x7ff) s++;
    else if (code > 0x7ff && code <= 0xffff) s+=2;
    if (code >= 0xDC00 && code <= 0xDFFF) i--; //trail surrogate
  }
  return s;
}

function byteLengthCharCode2(s){
  //assuming the String is UCS-2(aka UTF-16) encoded
  var n=0;
  for(var i=0,l=s.length; i<l; i++){
    var hi=s.charCodeAt(i);
    if(hi<0x0080){ //[0x0000, 0x007F]
      n+=1;
    }else if(hi<0x0800){ //[0x0080, 0x07FF]
      n+=2;
    }else if(hi<0xD800){ //[0x0800, 0xD7FF]
      n+=3;
    }else if(hi<0xDC00){ //[0xD800, 0xDBFF]
      var lo=s.charCodeAt(++i);
      if(i<l&&lo>=0xDC00&&lo<=0xDFFF){ //followed by [0xDC00, 0xDFFF]
        n+=4;
      }else{
        throw new Error("UCS-2 String malformed");
      }
    }else if(hi<0xE000){ //[0xDC00, 0xDFFF]
      throw new Error("UCS-2 String malformed");
    }else{ //[0xE000, 0xFFFF]
      n+=3;
    }
  }
  return n;
}

function byteLengthBlob(str) {
  return new Blob([str]).size;
}

function byteLengthTE(str) {
  return (new TextEncoder().encode(str)).length;
}

var sample = "😀œ´®†¥¨ˆøπ¬˚∆˙©ƒ∂ßåΩ≈ç√∫˜µ≤i";
var string = "";

// Adjust multiplier to change length of string.
let mult = 1000000;

for (var i = 0; i < mult; i++) {
  string += sample;
}

let t0;

try {
  t0 = Date.now();
  console.log("Lauri Oherd – URIEncoding:   " + byteLengthURIEncoding(string) + "    et: " + (Date.now() - t0));
} catch(e) {}

t0 = Date.now();
console.log("lovasoa – charCode:            " + byteLengthCharCode(string) + "    et: " + (Date.now() - t0));

t0 = Date.now();
console.log("fuweichin – charCode2:         " + byteLengthCharCode2(string) + "    et: " + (Date.now() - t0));

t0 = Date.now();
console.log("simap – Blob:                  " + byteLengthBlob(string) + "    et: " + (Date.now() - t0));

t0 = Date.now();
console.log("Riccardo Galli – TextEncoder:  " + byteLengthTE(string) + "    et: " + (Date.now() - t0));

Solution 8 - Javascript

Took me a while to find a solution for React Native so I'll put it here:

First install the buffer package:

npm install --save buffer

Then user the node method:

const { Buffer } = require('buffer');
const length = Buffer.byteLength(string, 'utf-8');

Solution 9 - Javascript

Actually, I figured out what's wrong. For the code to work the page <head> should have this tag:

<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />

Or, as suggested in comments, if server sends HTTP Content-Encoding header, it should work as well.

Then results from different browsers are consistent.

Here is an example:

<html>
<head>
  <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> 
  <title>mini string length test</title>
</head>
<body>

<script type="text/javascript">
document.write('<div style="font-size:100px">' 
    + (unescape(encodeURIComponent("ЭЭХ! Naïve?")).length) + '</div>'
  );
</script>
</body>
</html>

Note: I suspect that specifying any (accurate) encoding would fix the encoding problem. It is just a coincidence that I need UTF-8.

Solution 10 - Javascript

In NodeJS, Buffer.byteLength is a method specifically for this purpose:

let strLengthInBytes = Buffer.byteLength(str); // str is UTF-8

Note that by default the method assumes the string is in UTF-8 encoding. If a different encoding is required, pass it as the second argument.

Solution 11 - Javascript

Here is an independent and efficient method to count UTF-8 bytes of a string.

//count UTF-8 bytes of a string
function byteLengthOf(s){
	//assuming the String is UCS-2(aka UTF-16) encoded
	var n=0;
	for(var i=0,l=s.length; i<l; i++){
		var hi=s.charCodeAt(i);
		if(hi<0x0080){ //[0x0000, 0x007F]
			n+=1;
		}else if(hi<0x0800){ //[0x0080, 0x07FF]
			n+=2;
		}else if(hi<0xD800){ //[0x0800, 0xD7FF]
			n+=3;
		}else if(hi<0xDC00){ //[0xD800, 0xDBFF]
			var lo=s.charCodeAt(++i);
			if(i<l&&lo>=0xDC00&&lo<=0xDFFF){ //followed by [0xDC00, 0xDFFF]
				n+=4;
			}else{
				throw new Error("UCS-2 String malformed");
			}
		}else if(hi<0xE000){ //[0xDC00, 0xDFFF]
			throw new Error("UCS-2 String malformed");
		}else{ //[0xE000, 0xFFFF]
			n+=3;
		}
	}
	return n;
}

var s="\u0000\u007F\u07FF\uD7FF\uDBFF\uDFFF\uFFFF";
console.log("expect byteLengthOf(s) to be 14, actually it is %s.",byteLengthOf(s));

Note that the method may throw error if an input string is UCS-2 malformed

Solution 12 - Javascript

This would work for BMP and SIP/SMP characters.

    String.prototype.lengthInUtf8 = function() {
    	var asciiLength = this.match(/[\u0000-\u007f]/g) ? this.match(/[\u0000-\u007f]/g).length : 0;
    	var multiByteLength = encodeURI(this.replace(/[\u0000-\u007f]/g)).match(/%/g) ? encodeURI(this.replace(/[\u0000-\u007f]/g, '')).match(/%/g).length : 0;
    	return asciiLength + multiByteLength;
    }

    'test'.lengthInUtf8();
    // returns 4
    '\u{2f894}'.lengthInUtf8();
    // returns 4
    'سلام علیکم'.lengthInUtf8();
    // returns 19, each Arabic/Persian alphabet character takes 2 bytes. 
    '你好，JavaScript 世界'.lengthInUtf8();
    // returns 26, each Chinese character/punctuation takes 3 bytes.

Solution 13 - Javascript

You can try this:

function getLengthInBytes(str) {
  var b = str.match(/[^\x00-\xff]/g);
  return (str.length + (!b ? 0: b.length)); 
}

It works for me.

Solution 14 - Javascript

Ran into this https://stackoverflow.com/questions/67057561/how-to-emulate-mb-strlen-in-javascript-with-strings-containing-html

where the string was not a good match for earlier answers.

I got the expected length of 8 here:

const str = 'X&nbsp;&#34;FUEL&#34;'
const div = document.createElement("div");
div.innerHTML = str
console.log(div.textContent.length)

Solution 15 - Javascript

I'm checking the length with :

const str = "🌧as%20😈"
const len = new URL(str.replace(/%[A-F0-9]{2}/g, "..."), "https:$").pathname.replace(/%[A-F0-9]{2}/g, "-").length - 1
console.log(len) // 13

when i (try to) verify if a directory name is less than 180 characters

Content Type	Original Author	Original Content on Stackoverflow
Question	Alexander Gladysh	View Question on Stackoverflow
Solution 1 - Javascript	Riccardo Galli	View Answer on Stackoverflow
Solution 2 - Javascript	Mike Samuel	View Answer on Stackoverflow
Solution 3 - Javascript	lovasoa	View Answer on Stackoverflow
Solution 4 - Javascript	simap	View Answer on Stackoverflow
Solution 5 - Javascript	Lauri Oherd	View Answer on Stackoverflow
Solution 6 - Javascript	Iván Pérez	View Answer on Stackoverflow
Solution 7 - Javascript	KevinHJ	View Answer on Stackoverflow
Solution 8 - Javascript	laurent	View Answer on Stackoverflow
Solution 9 - Javascript	Alexander Gladysh	View Answer on Stackoverflow
Solution 10 - Javascript	Boaz	View Answer on Stackoverflow
Solution 11 - Javascript	fuweichin	View Answer on Stackoverflow
Solution 12 - Javascript	chrislau	View Answer on Stackoverflow
Solution 13 - Javascript	anh tran	View Answer on Stackoverflow
Solution 14 - Javascript	mplungjan	View Answer on Stackoverflow
Solution 15 - Javascript	user13366325	View Answer on Stackoverflow