PHP Fatal error: Call to undefined function curl_init()
PhpLamppPhp Problem Overview
I try https://stackoverflow.com/questions/2301113/php-post-request-inside-a-post-request thinking it might be useful for me. My code is given below:
$sub_req_url = "http://localhost/index1.php";
$ch = curl_init($sub_req_url);
$encoded = '';
// include GET as well as POST variables; your needs may vary.
foreach($_GET as $name => $value) {
$encoded .= urlencode($name).'='.urlencode($value).'&';
}
foreach($_POST as $name => $value) {
$encoded .= urlencode($name).'='.urlencode($value).'&';
}
// chop off last ampersand
$encoded = substr($encoded, 0, strlen($encoded)-1);
curl_setopt($ch, CURLOPT_POSTFIELDS, $encoded);
curl_setopt($ch, CURLOPT_HEADER, 0);
curl_setopt($ch, CURLOPT_POST, 1);
curl_exec($ch);
curl_close($ch);
from the index.php
file and index2.php
is another file in the same directory and when I open the page I get the following error in my error.log
file:
[Sat Dec 18 15:24:53 2010] [error] [client ::1] PHP Fatal error: Call to undefined function curl_init() in /var/www/testing1/index.php on line 5
What I want to do is to have a reservation form that send post request. Then I want to process post values and send again the post request to paypal.
Php Solutions
Solution 1 - Php
You need to install CURL support for php.
In Ubuntu you can install it via
sudo apt-get install php5-curl
If you're using apt-get then you won't need to edit any PHP configuration, but you will need to restart your Apache.
sudo /etc/init.d/apache2 restart
If you're still getting issues, then try and use phpinfo() to make sure that CURL is listed as installed. (If it isn't, then you may need to open another question, asking why your packages aren't installing.)
There is an installation manual in the PHP CURL documentation.
Solution 2 - Php
For Windows, if anybody is interested, uncomment the following line (by removing the ;) from php.ini
;extension=php_curl.dll
Restart apache server.
Solution 3 - Php
I got it working in ubuntu 16.04 by following steps.My php version was 7.0 > sudo apt-get install php7.0-curl > > sudo service apache2 restart
Solution 4 - Php
For Ubuntu:
add extension=php_curl.so
to php.ini to enable, if necessary. Then sudo service apache2 restart
this is generally taken care of automatically, but there are situations - eg, in shared development environments - where it can become necessary to re-enable manually.
The thumbprint will match all three of these conditions:
- Fatal Error on curl_init() call
- in php_info, you will see the curl module author (indicating curl is installed and available)
- also in php_info, you will see no curl config block (indicating curl wasn't loaded)
Solution 5 - Php
In my case, in Xubuntu, I had to install libcurl3 libcurl3-dev libraries. With this command everything worked:
sudo apt-get install curl libcurl3 libcurl3-dev php5-curl
Solution 6 - Php
Just adding my answer for the case where there are multiple versions of PHP installed in your system, and you are sure that you have already installed the php-curl
package, and yet Apache is still giving you the same error.
Solution 7 - Php
To fix this bug, I did:
- In
php.ini
file, uncomment this line:extension=php_curl.dll
- In
php.ini
file, uncomment this line:extension_dir = "ext"
- I restarted NETBEANS, as I was using Built-in server
Solution 8 - Php
I got this error using PHP7 / Apache 2.4 on a windows platform. curl_init
worked from CLI but not with Apache 2.4. I resolved it by adding LoadFile
directives for libeay32.dll and ssleay32.dll:
LoadFile "C:/path/to/Php7/libeay32.dll"
LoadFile "C:/path/to/Php7/ssleay32.dll"
LoadFile "C:/path/to/Php7/php7ts.dll"
LoadModule php7_module "C:/path/to/Php7/php7apache2_4.dll"
Solution 9 - Php
This answer is for https request:
Curl doesn't have built-in root certificates (like most modern browser do). You need to explicitly point it to a cacert.pem file:
curl_setopt($ch, CURLOPT_CAINFO, '/path/to/cert/file/cacert.pem');
Without this, curl cannot verify the certificate sent back via ssl. This same root certificate file can be used every time you use SSL in curl.
You can get the cacert.pem file here: http://curl.haxx.se/docs/caextract.html
Reference https://stackoverflow.com/questions/9774349/php-curl-not-working-with-https
Solution 10 - Php
Step 1 :
C:/(path to php folder)/php.ini
enable extension=php_curl.dll
(remove the ;
at the end of the line)
Step 2 :
Add this to Apache/conf/httpd.conf
(libeay32.dll, ssleay32.dll, libssh2.dll find directly in php7 folder)
# load curl and open ssl libraries
LoadFile "C:/(path to php folder)/libeay32.dll"
LoadFile "C:/(path to php folder)/ssleay32.dll"
LoadFile "C:/(path to php folder)/libssh2.dll"
Solution 11 - Php
Had this problem but found the answer here: https://askubuntu.com/questions/1116448/cannot-enable-php-curl-on-ubuntu-18-04-php-7-2
Had to:
sudo a2dismod php7.0
And:
sudo a2enmod php7.2
Then:
sudo service apache2 restart
This was after a system upgrade to next version of Ubuntu. All the other answers I found were stale, due to a bad cert apparently on the PPA most of them pointed out, but would probably not have worked anyway. The real issue was disabling the old versions of php, apparently.
Found the solution here:
https://askubuntu.com/questions/1116448/cannot-enable-php-curl-on-ubuntu-18-04-php-7-2
Solution 12 - Php
On newer versions of PHP on Windows, like PHP 7.x, the corresponding configuration lines suggested on previous answers here, have changed. You need to uncomment (remove the ; at the beginning of the line) the following line:
extension_dir = "ext"
extension=curl
Solution 13 - Php
(Trying to get Curl working via PHP and Apache on Windows...)
I kept getting an error saying: Call to undefined function 'curl_init()'
I made sure I had enabled curl with this line in my php.ini file: extension=php_curl.dll
I made sure the extension_dir variable was being set properly, like this: extension_dir = "ext"
I was doing everything everyone else said on the forums and curl was not showing up in my call to phpinfo(), and I kept getting that same error from above.
Finally I found out that Apache by default looks for php.ini in the C:\Windows folder. I had been changing php.ini in my PHP installation folder. Once I copied my php.ini into C:\Windows, everything worked.
Took me forever to figure that out, so thought I'd post in case it helps someone else.
Solution 14 - Php
For PHP 7 and Windows x64
libeay32.dll, libssh2.dll and ssleay32.dll should not be in apache/bin and should only exist in php directory and add php directory in system environment variable. This work for me.
Obvisouly in php.ini you should have enable php_curl.dll as well.
Solution 15 - Php
RusAlex answer is right in that for Apache you have to install and enable curl and restart your apache service:
sudo apt-get install php5-curl
sudo service apache2 restart
On my Ubuntu Server with nginx and php5-fpm I however ran into the following problem. I had to restart nginx and php5-fpm like so:
sudo service nginx restart
sudo service php5-fpm restart
But I had non-working php5-fpm processes hanging around, which apparently is a bug in ubuntu https://bugs.launchpad.net/ubuntu/+source/php5/+bug/1242376 So I had to kill all idle php5-fpm processes to able to restart php5-fpm so that the curl module is actually loaded
sudo kill <Process Id of php5-fpm Process)
Solution 16 - Php
function curl_int(); cause server error,install sudo apt-get install php5-curl restart apache2 server .. it will work like charm
Solution 17 - Php
For linux you can install it via
sudo apt-get install php5-curl
For Windows(removing the ;) from php.ini
;extension=php_curl.dll
Restart apache server.
Solution 18 - Php
On Ubuntu 18.04 these two commands solve my this problem.
sudo apt-get install php5.6-curl //install curl for php 5.6
sudo service apache2 restart //restart apache
Solution 19 - Php
Seems you haven't installed the Curl on your server.
Check the PHP version of your server and run the following command to install the curl.
sudo apt-get install php7.2-curl
Then restart the apache service by using the following command.
sudo service apache2 restart
Replace 7.2 with your PHP version.
Solution 20 - Php
I also faced this issue. My Operating system is Ubuntu 18.04 and my PHP version is PHP 7.2.
Here's how I solved it:
Install CURL on Ubuntu Server:
sudo apt-get install curl
Add the PHP CURL repository below to your sources list:
sudo add-apt-repository ppa:ondrej/php
Refresh your package database
sudo apt update
Install PHP-curl 7.2
sudo apt install php7.2-fpm php7.2-gd php7.2-curl php7.2-mysql php7.2-dev php7.2-cli php7.2-common php7.2-mbstring php7.2-intl php7.2-zip php7.2-bcmath
Restart Apache Server
sudo systemctl restart apache2
That's all.
I hope this helps
Solution 21 - Php
Yet another answer ... If you land here in Oct 2020 because PHP on the command line (CLI) has stopped working, guess what ... some upgrades will move you to a different/newer version of PHP silently, without asking!
Run:
php --version
and you might be surprised to see what version the CLI is running.
Then run:
ll /usr/bin/php
and you might be surprised to see where this is linking to.
It's best to reference the SPECIFIC version of PHP you want when calling the PHP binary directly and not a symbolic link.
Example:
/usr/bin/php7.3
will give you the exact version you want. You can't trust /usr/bin/php or even just typing php because an upgrade might switch versions on you silently.
Solution 22 - Php
I have solved this issue in Ubuntu 20.04.1 LTS and PHP Version 7.4.3
Update the package index:
sudo apt-get update
Install php7.4-curl deb package:
sudo apt-get install php7.4-curl
Solution 23 - Php
This worked for me with raspian:
sudo apt update && sudo apt upgrade
sudo apt install php-curl
finally:
sudo systemctl restart apache2
or:
sudo systemctl restart nginx
Solution 24 - Php
To install the last version of php-curl on Ubuntu, use this:
sudo apt-get install php-curl -y