PHP-FPM and Nginx: 502 Bad Gateway
PhpNginxAmazon Ec2FastcgiFpmPhp Problem Overview
Configuration
- Ubuntu Server 11.10 64 bit
- Amazon AWS, Ec2, hosted on the cloud
- t1.micro instance
Before I write anything else, I'd like to state that I've checked both nginx 502 bad gateway and Nginx + PHP-FPM 502 Bad Gateway threads, which unfortunately haven't helped me in this regard.
The issue appears to be rather common: a misconfiguration of nginx or php-fpm can lead to a 502 Bad Gateway error, which is something that I haven't been able to get rid of. Note that this appears even when I go to my domain root, without specifying any particular directory.
I'm running an Amazon EC2 webserver, with port 9000 enabled, port 80 open, etc.
The question in particular is, how can I get rid of this nasty error? Or, better yet, how can I get php5-fpm to actually work.
What I Have Attempted so Far
Mostly consistent editing of configuration files, notably php-fpm.conf and nginx.conf.
i. php-fpm.conf
I've added the following, which hasn't quite helped much:
;;;;;;;;;;;;;
; Fpm Start ;
;;;;;;;;;;;;;
;pm.start_servers = 20
;pm.min_spare_servers = 5
;pm.max_spare_servers = 35
Now, afterward I tried including my configuration files:
include=/etc/php5/fpm/*.conf
Which only screwed me even further.
Full Configuration
;;;;;;;;;;;;;;;;;;;;;
; FPM Configuration ;
;;;;;;;;;;;;;;;;;;;;;
; All relative paths in this configuration file are relative to PHP's install
; prefix (/usr). This prefix can be dynamicaly changed by using the
; '-p' argument from the command line.
; Include one or more files. If glob(3) exists, it is used to include a bunch of
; files from a glob(3) pattern. This directive can be used everywhere in the
; file.
; Relative path can also be used. They will be prefixed by:
; - the global prefix if it's been set (-p arguement)
; - /usr otherwise
;include=/etc/php5/fpm/*.conf
;;;;;;;;;;;;;;;;;;
; Global Options ;
;;;;;;;;;;;;;;;;;;
[global]
; Pid file
; Note: the default prefix is /var
; Default Value: none
pid = /var/run/php5-fpm.pid
; Error log file
; Note: the default prefix is /var
; Default Value: log/php-fpm.log
error_log = /var/log/php5-fpm.log
; Log level
; Possible Values: alert, error, warning, notice, debug
; Default Value: notice
log_level = notice
; If this number of child processes exit with SIGSEGV or SIGBUS within the time
; interval set by emergency_restart_interval then FPM will restart. A value
; of '0' means 'Off'.
; Default Value: 0
;emergency_restart_threshold = 0
; Interval of time used by emergency_restart_interval to determine when
; a graceful restart will be initiated. This can be useful to work around
; accidental corruptions in an accelerator's shared memory.
; Available Units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
emergency_restart_interval = 0
; Time limit for child processes to wait for a reaction on signals from master.
; Available units: s(econds), m(inutes), h(ours), or d(ays)
; Default Unit: seconds
; Default Value: 0
;process_control_timeout = 0
; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging.
; Default Value: yes
daemonize = no
;;;;;;;;;;;;;
; Fpm Start ;
;;;;;;;;;;;;;
;pm.start_servers = 20
;pm.min_spare_servers = 5
;pm.max_spare_servers = 35
;;;;;;;;;;;;;;;;;;;;
; Pool Definitions ;
;;;;;;;;;;;;;;;;;;;;
; Multiple pools of child processes may be started with different listening
; ports and different management options. The name of the pool will be
; used in logs and stats. There is no limitation on the number of pools which
; FPM can handle. Your system will tell you anyway :)
; To configure the pools it is recommended to have one .conf file per
; pool in the following directory:
include=/etc/php5/fpm/pool.d/*.conf
ii. nginx.conf
In all honesty this configuration is a smattering of a few websites I've visited, but I can tell you that before this 502 Bad Gateway business, the server was running fine (without PHP working. Period.).
The issue primarily lies in the fact that something is terribly, terribly wrong. And now, when I try to do a service php5-fpm restart, it hangs in what I'm guessing is an infinite loop or something, which I can't even CTRL-C out of.
Full Configuration
user www-data;
worker_processes 1;
pid /var/run/nginx.pid;
events {
worker_connections 64;
# multi_accept on;
}
http {
##
# Basic Settings
##
sendfile on;
tcp_nopush off;
tcp_nodelay on;
keepalive_timeout 65;
types_hash_max_size 2048;
# server_tokens off;
# server_names_hash_bucket_size 64;
# server_name_in_redirect off;
include /etc/nginx/mime.types;
default_type application/octet-stream;
##
# Logging Settings
##
access_log /var/log/nginx/access.log;
error_log /var/log/nginx/error.log;
##
# Gzip Settings
##
gzip on;
gzip_disable "msie6";
# gzip_vary on;
# gzip_proxied any;
# gzip_comp_level 6;
# gzip_buffers 16 8k;
# gzip_http_version 1.1;
# gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript;
##
# Virtual Host Configs
##
include /etc/nginx/conf.d/*.conf;
include /etc/nginx/sites-enabled/*;
server {
listen 80;
server_name ec2-xx-xx-xx-xx.compute-x.amazonaws.com;
location ~ ^(.+\.php)(.*)$ {
root /home/wayvac/public;
fastcgi_pass unix:/var/run/php5-fpm.pid;
#fastcgi_pass 127.0.0.1:9000; #Un-comment this and comment "fastcgi_pass unix:/var/run/php-fpm/php-fpm.sock;" if you are not using php-fpm.
fastcgi_index index.php;
set $document_root2 $document_root;
if ($document_root2 ~ "^(.*\\\\).*?[\\\\|\/]\.\.\/(.*)$") { set $document_root2 $1$2; }
if ($document_root2 ~ "^(.*\\\\).*?[\\\\|\/]\.\.\/(.*)$") { set $document_root2 $1$2; }
if ($document_root2 ~ "^(.*\\\\).*?[\\\\|\/]\.\.\/(.*)$") { set $document_root2 $1$2; }
if ($document_root2 ~ "^(.*\\\\).*?[\\\\|\/]\.\.\/(.*)$") { set $document_root2 $1$2; }
if ($document_root2 ~ "^(.*\\\\).*?[\\\\|\/]\.\.\/(.*)$") { set $document_root2 $1$2; }
fastcgi_split_path_info ^(.+\.php)(.*)$;
fastcgi_param SCRIPT_FILENAME $document_root2$fastcgi_script_name;
fastcgi_param PATH_INFO $fastcgi_path_info;
fastcgi_param PATH_TRANSLATED $document_root2$fastcgi_path_info;
include fastcgi_params;
fastcgi_param DOCUMENT_ROOT $document_root2;
}
access_log /var/log/nginx/access.log;
error_log /var/log/nginx/error.log;
location / {
root /home/wayvac/public;
index index.html index.htm index.php;
}
location ~* \.(?:ico|css|js|gif|jpe?g|png)$ {
# Some basic cache-control for static files to be sent to the browser
expires max;
add_header Pragma public;
add_header Cache-Control "public, must-revalidate, proxy-revalidate";
}
#include drop.conf;
#include php.conf;
}
}
Php Solutions
Solution 1 - Php
If anyone finds this page by encountering the same problem I had, I found the answer here.
For those of you who can't be bothered to click and work it out for themselves... ;)
The Condition:
Ubuntu or Debian server with NGINX and PHP 5.3 works fine but upgrading PHP to 5.4 gives 502 Bad Gateway errors. Looking for services running on port 9000 (typically running netstat -lp or similar) returns nothing.
The fix:
Open /etc/php5/fpm/pool.d/www.conf and make a note of the 'listen' parameter (in my case /var/run/php5-fpm.sock):
; The address on which to accept FastCGI requests.
; Valid syntaxes are:
; 'ip.add.re.ss:port' - to listen on a TCP socket to a specific address on
; a specific port;
; 'port' - to listen on a TCP socket to all addresses on a
; specific port;
; '/path/to/unix/socket' - to listen on a unix socket.
; Note: This value is mandatory.
listen = /var/run/php5-fpm.sock
and replace the fastcgi_pass variable in your vhost with the location you just noted.
So this sample symfony2 configuration (taken from here):
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
location ~ ^/(app|app_dev)\.php(/|$) {
fastcgi_pass 127.0.0.1:9000;
fastcgi_split_path_info ^(.+\.php)(/.*)$;
include fastcgi_params;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param HTTPS off;
}
becomes this:
# pass the PHP scripts to FastCGI server at /var/run/php5-fpm.sock
location ~ ^/(app|app_dev)\.php(/|$) {
fastcgi_pass unix:/var/run/php5-fpm.sock;
fastcgi_split_path_info ^(.+\.php)(/.*)$;
include fastcgi_params;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param HTTPS off;
}
Then restart nginx:
sudo /etc/init.d/nginx restart
Note: replace ~ ^/(app|app_dev)\.php(/|$) { with ~ ^/index\.php(/|$) { if you're not on SF2**
Hope this saves someone a little bit of time :)
Edit
Of course, you could change the listen = /var/run/php5-fpm.sock to listen = 127.0.0.1:9000 in /etc/php5/fpm/pool.d/www.conf then restart php5-fpm (which would save you from having to change your vhosts), but you have to assume they changed php5-fpm to run through a socket rather than listening on port 9000 for a reason.
Edit2
If you're still experiencing 502 error see this answer.
Solution 2 - Php
Try setting these values, it solves problem in fast-cgi
fastcgi_buffer_size 16k;
fastcgi_buffers 4 16k;
Solution 3 - Php
I made all this similar tweaks, but from time to time I was getting 501/502 errors (daily).
This are my settings on /etc/php5/fpm/pool.d/www.conf to avoid 501 and 502 nginx errors… The server has 16Gb RAM. This configuration is for a 8Gb RAM server so…
sudo nano /etc/php5/fpm/pool.d/www.conf
then set the following values for
pm.max_children = 70
pm.start_servers = 20
pm.min_spare_servers = 20
pm.max_spare_servers = 35
pm.max_requests = 500
After this changes restart php-fpm
sudo service php-fpm restart
Solution 4 - Php
If you met the problem after upgrading php-fpm like me, try this: open /etc/php5/fpm/pool.d/www.conf uncomment the following lines:
listen.owner = www-data
listen.group = www-data
listen.mode = 0666
then restart php-fpm.
Solution 5 - Php
Don't forget that php-fpm is a service. After installing it, make sure you start it:
# service php-fpm start
# chkconfig php-fpm on
Solution 6 - Php
For anyone else struggling to get to the bottom of this, I tried adjusting timeouts as suggested as I didn't want to stop using Unix sockets...after lots of troubleshooting and not much to go on I found that this issue was being caused by the APC extension that I'd enabled in php-fpm a few months back. Disabling this extension resolved the intermittent 502 errors, easiest way to do this was by commenting out the following line :
;extension = apc.so
This did the trick for me!
Solution 7 - Php
The port was changed to 9001 in 5.4, just changing the port from 9000 to 9001 in the nginx conf and in php-fpm configuration worked for me.
Solution 8 - Php
Hope this tip will save someone else's life. In my case the problem was that I ran out of memory, but only slightly, was hard to think about it. Wasted 3hrs on that. I recommend running:
sudo htop
or
sudo free -m
...along with running problematic requests on the server to see if your memory doesn't run out. And if it does like in my case, you need to create swap file (unless you already have one).
I have followed this tutorial to create swap file on Ubuntu Server 14.04 and it worked just fine: http://www.cyberciti.biz/faq/ubuntu-linux-create-add-swap-file/
Solution 9 - Php
You should see the error log. By default, its location is in /var/log/nginx/error.log
In my case, 502 get way because of:
GET /app_dev.php HTTP/1.1", upstream: "fastcgi://unix:/run/php/php7.0-fpm.sock:", host: "symfony2.local"
2016/05/25 11:57:28 [error] 22889#22889: *3 upstream sent too big header while reading response header from upstream, client: 127.0.0.1, server: symfony2.local, request: "GET /app_dev.php HTTP/1.1", upstream: "fastcgi://unix:/run/php/php7.0-fpm.sock:", host: "symfony2.local"
2016/05/25 11:57:29 [error] 22889#22889: *3 upstream sent too big header while reading response header from upstream, client: 127.0.0.1, server: symfony2.local, request: "GET /app_dev.php HTTP/1.1", upstream: "fastcgi://unix:/run/php/php7.0-fpm.sock:", host: "symfony2.local"
2016/05/25 11:57:29 [error] 22889#22889: *3 upstream sent too big header while reading response header from upstream, client: 127.0.0.1, server: symfony2.local, request: "GET /app_dev.php HTTP/1.1", upstream: "fastcgi://unix:/run/php/php7.0-fpm.sock:", host: "symfony2.local"
When we know exactly what is wrong, then fix it. For these error, just modify the buffer:
fastcgi_buffers 16 512k;
fastcgi_buffer_size 512k;
Solution 10 - Php
I've also found this error can be caused when writing json_encoded() data to MySQL. To get around it I base64_encode() the JSON. Please not that when decoded, the JSON encoding can change values. Nb. 24 can become 24.00
Solution 11 - Php
All right after trying every solution on the web I ended up figuare out the issue using very simple method , first I cheked php-fpm err log
cat /var/log/php5-fpm.log
and the most repeated error was
" WARNING: [pool www] server reached pm.max_children setting (5), consider raising it "
I edit PHP-fpm pools setting
nano /etc/php5/fpm/pool.d/www.conf
I chenged This Line
pm.max_children = 5
To new Value
pm.max_children = 10
BTW I'm using low end VPS with 128MB ram As everyone else I was thinkin redusing pm.max_children will make my server run faster consume less memory , but the setting we using were too low tho even start PHP-fpm process .
I hope this help others since I found this after 24 hour testing and failing , ever my webhost support were not able to solve the issue .
Solution 12 - Php
I'm very late to this game, but my problem started when I upgraded php on my server. I was able to just remove the .socket file and restart my services. Then, everything worked. Not sure why it made a difference, since the file is size 0 and the ownership and permissions are the same, but it worked.
Solution 13 - Php
Before messing with Nginx config, try to disable ChromePHP first.
1 - Open app/config/config_dev.yml
2 - Comment these lines:
chromephp:
type: chromephp
level: info
ChromePHP pack the debug info json-encoded in the X-ChromePhp-Data header, which is too big for the default config of nginx with fastcgi.
Solution 14 - Php
In your NGINX vhost file, in location block which processes your PHP files (usually location ~ \.php$ {) through FastCGI, make sure you have next lines:
proxy_buffer_size 128k;
proxy_buffers 4 256k;
proxy_busy_buffers_size 256k;
fastcgi_buffer_size 16k;
fastcgi_buffers 4 16k;
After that don't forget to restart fpm and nginx.
Additional:
NGINX vhost paths
/etc/nginx/sites-enabled/- Linux- '/usr/local/etc/nginx/sites-enabled/' - Mac
Restart NGINX:
sudo service nginx restart- Linuxbrew service restart nginx- Mac
Restart FPM:
Determine fpm process name:
systemctl list-unit-files | grep fpm- Linuxbrew services list | grep php- Mac
and then restart it with:
sudo service <service-name> restart- Linuxbrew services restart <service-name>- Mac
Solution 15 - Php
Maybe this answer will help:
The solution was to replace www-data with nginx in /var/www/php/fpm/pool.d/www.conf
And respectively modify the socket credentials:
$ sudo chmod nginx:nginx /var/run/php/php7.2-fpm.sock