In bash, how to store a return value in a variable?

Linux Problem Overview

I know some very basic commands in Linux and am trying to write some scripts. I have written a function which evaluates the sum of last 2-digits in a 5-digit number. The function should concatenate this resultant sum in between the last 2-digits and return it. The reason I want to return this value is because I will be using this value in the other function.

Ex: if I have 12345, then my function will calculate 4+5 and return 495.

#!/bin/bash

set -x
echo "enter: "
        read input

function password_formula
{
        length=${#input}
        last_two=${input:length-2:length}
        first=`echo $last_two| sed -e 's/\(.\)/\1 /g'|awk '{print $2}'`
        second=`echo $last_two| sed -e 's/\(.\)/\1 /g'|awk '{print $1}'`
        let sum=$first+$second
        sum_len=${#sum}
        echo $second
        echo $sum

        if [ $sum -gt 9 ]
        then
               sum=${sum:1}
        fi

        value=$second$sum$first
        return $value
}
result=$(password_formula)
echo $result

I am trying to echo and see the result but I am getting the output as shown below.

-bash-3.2$ ./file2.sh 
+++ password_formula
+++ echo 'enter: '
+++ read input
12385
+++ length=8
+++ last_two=85
++++ echo 85
++++ sed -e 's/\(.\)/\1 /g'
++++ awk '{print $2}'
+++ first=5
++++ echo 85
++++ sed -e 's/\(.\)/\1 /g'
++++ awk '{print $1}'
+++ second=8
+++ let sum=5+8
+++ sum_len=2
+++ echo 5
+++ echo 8
+++ echo 13
+++ '[' 13 -gt 9 ']'
+++ sum=3
+++ value=835
+++ return 835
++ result='enter: 
5
8
13'
++ echo enter: 5 8 13
enter: 5 8 13

I also tried to print the result as:

password_formula
RESULT=$?
echo $RESULT

But that is giving some unknown value:

++ RESULT=67
++ echo 67
67

How can I properly store the correct value and print (to double check) on the screen?

Thanks in advance.

Linux Solutions

Solution 1 - Linux

Simplest answer:

the return code from a function can be only a value in the range from 0 to 255 . To store this value in a variable you have to do like in this example:

#!/bin/bash

function returnfunction {
    # example value between 0-255 to be returned 
    return 23
}

# note that the value has to be stored immediately after the function call :
returnfunction
myreturnvalue=$?

echo "myreturnvalue is "$myreturnvalue

Solution 2 - Linux

The return value (aka exit code) is a value in the range 0 to 255 inclusive. It's used to indicate success or failure, not to return information. Any value outside this range will be wrapped.

To return information, like your number, use

echo "$value"

To print additional information that you don't want captured, use

echo "my irrelevant info" >&2

Finally, to capture it, use what you did:

 result=$(password_formula)

In other words:

echo "enter: "
        read input

password_formula()
{
        length=${#input}
        last_two=${input:length-2:length}
        first=`echo $last_two| sed -e 's/\(.\)/\1 /g'|awk '{print $2}'`
        second=`echo $last_two| sed -e 's/\(.\)/\1 /g'|awk '{print $1}'`
        let sum=$first+$second
        sum_len=${#sum}
        echo $second >&2
        echo $sum >&2

        if [ $sum -gt 9 ]
        then
               sum=${sum:1}
        fi

        value=$second$sum$first
        echo $value
}
result=$(password_formula)
echo "The value is $result"

Solution 3 - Linux

It is easy you need to echo the value you need to return and then capture it like below

demofunc(){
    local variable="hellow"
    echo $variable    
}

val=$(demofunc)
echo $val

Solution 4 - Linux

Use the special bash variable "$?" like so:

function_output=$(my_function)
function_return_value=$?

Solution 5 - Linux

The answer above suggests changing the function to echo data rather than return it so that it can be captured.

For a function or program that you can't modify where the return value needs to be saved to a variable (like test/[, which returns a 0/1 success value), echo $? within the command substitution:

# Test if we're remote.
isRemote="$(test -z "$REMOTE_ADDR"; echo $?)"
# Or:
isRemote="$([ -z "$REMOTE_ADDR" ]; echo $?)"

# Additionally you may want to reverse the 0 (success) / 1 (error) values
# for your own sanity, using arithmetic expansion:
remoteAddrIsEmpty="$([ -z "$REMOTE_ADDR" ]; echo $((1-$?)))"

E.g.

$ echo $REMOTE_ADDR

$ test -z "$REMOTE_ADDR"; echo $?
0
$ REMOTE_ADDR=127.0.0.1
$ test -z "$REMOTE_ADDR"; echo $?
1
$ retval="$(test -z "$REMOTE_ADDR"; echo $?)"; echo $retval
1
$ unset REMOTE_ADDR
$ retval="$(test -z "$REMOTE_ADDR"; echo $?)"; echo $retval
0

For a program which prints data but also has a return value to be saved, the return value would be captured separately from the output:

# Two different files, 1 and 2.
$ cat 1
1
$ cat 2
2
$ diffs="$(cmp 1 2)"
$ haveDiffs=$?
$ echo "Have differences? [$haveDiffs] Diffs: [$diffs]"
Have differences? [1] Diffs: [1 2 differ: char 1, line 1]
$ diffs="$(cmp 1 1)"
$ haveDiffs=$?
$ echo "Have differences? [$haveDiffs] Diffs: [$diffs]"
Have differences? [0] Diffs: []

# Or again, if you just want a success variable, reverse with arithmetic expansion:
$ cmp -s 1 2; filesAreIdentical=$((1-$?))
$ echo $filesAreIdentical
0

Solution 6 - Linux

It's due to the echo statements. You could switch your echos to prints and return with an echo. Below works

#!/bin/bash

set -x
echo "enter: "
read input

function password_formula
{
        length=${#input}
        last_two=${input:length-2:length}
        first=`echo $last_two| sed -e 's/\(.\)/\1 /g'|awk '{print $2}'`
        second=`echo $last_two| sed -e 's/\(.\)/\1 /g'|awk '{print $1}'`
        let sum=$first+$second
        sum_len=${#sum}
        print $second
        print $sum

        if [ $sum -gt 9 ]
        then
           sum=${sum:1}
        fi

        value=$second$sum$first
        echo $value
}
result=$(password_formula)
echo $result

Solution 7 - Linux

Something like this could be used, and still maintaining meanings of return (to return control signals) and echo (to return information) and logging statements (to print debug/info messages).

v_verbose=1
v_verbose_f=""         # verbose file name
FLAG_BGPID=""

e_verbose() {
        if [[ $v_verbose -ge 0 ]]; then
                v_verbose_f=$(tempfile)
                tail -f $v_verbose_f &
                FLAG_BGPID="$!"
        fi
}

d_verbose() {
        if [[ x"$FLAG_BGPID" != "x" ]]; then
                kill $FLAG_BGPID > /dev/null
                FLAG_BGPID=""
                rm -f $v_verbose_f > /dev/null
        fi
}

init() {
        e_verbose

        trap cleanup SIGINT SIGQUIT SIGKILL SIGSTOP SIGTERM SIGHUP SIGTSTP
}

cleanup() {
        d_verbose
}

init

fun1() {
	echo "got $1" >> $v_verbose_f
	echo "got $2" >> $v_verbose_f
	echo "$(( $1 + $2 ))"
	return 0
}

a=$(fun1 10 20)
if [[ $? -eq 0 ]]; then
	echo ">>sum: $a"
else
	echo "error: $?"
fi
cleanup

In here, I'm redirecting debug messages to separate file, that is watched by tail, and if there is any changes then printing the change, trap is used to make sure that background process always ends.

This behavior can also be achieved using redirection to /dev/stderr, But difference can be seen at the time of piping output of one command to input of other command.

Content Type	Original Author	Original Content on Stackoverflow
Question	itsh	View Question on Stackoverflow
Solution 1 - Linux	Samuele Catuzzi	View Answer on Stackoverflow
Solution 2 - Linux	that other guy	View Answer on Stackoverflow
Solution 3 - Linux	imal hasaranga perera	View Answer on Stackoverflow
Solution 4 - Linux	Ytsen de Boer	View Answer on Stackoverflow
Solution 5 - Linux	Calpau	View Answer on Stackoverflow
Solution 6 - Linux	Kat Farrell	View Answer on Stackoverflow
Solution 7 - Linux	dinesh saini	View Answer on Stackoverflow