How to include package data with setuptools/distutils?

When using setuptools, I can not get the installer to pull in any package_data files. Everything I've read says that the following is the correct way to do it. Can someone please advise?

setup(
   name='myapp',
   packages=find_packages(),
   package_data={
      'myapp': ['data/*.txt'],
   },
   include_package_data=True,
   zip_safe=False,
   install_requires=['distribute'],
)

where myapp/data/ is the location of the data files.

I realize that this is an old question, but for people finding their way here via Google: package_data is a low-down, dirty lie. It is only used when building binary packages (python setup.py bdist ...) but not when building source packages (python setup.py sdist ...). This is, of course, ridiculous -- one would expect that building a source distribution would result in a collection of files that could be sent to someone else to built the binary distribution.

In any case, using MANIFEST.in will work both for binary and for source distributions.

I just had this same issue. The solution, was simply to remove include_package_data=True.

After reading here, I realized that include_package_data aims to include files from version control, as opposed to merely "include package data" as the name implies. From the docs:

> The data files [of include_package_data] must be under CVS or Subversion control > > ... > > If you want finer-grained control over what files are included (for example, if you have documentation files in your package directories and want to exclude them from installation), then you can also use the package_data keyword.

Taking that argument out fixed it, which is coincidentally why it also worked when you switched to distutils, since it doesn't take that argument.

Following @Joe 's recommendation to remove the include_package_data=True line also worked for me.

To elaborate a bit more, I have no MANIFEST.in file. I use Git and not CVS.

Repository takes this kind of shape:

/myrepo
	- .git/
	- setup.py
	- myproject
		- __init__.py
		- some_mod
			- __init__.py
			- animals.py
			- rocks.py
		- config
			- __init__.py
			- settings.py
			- other_settings.special
			- cool.huh
			- other_settings.xml
		- words
			- __init__.py
			word_set.txt
	

setup.py:

from setuptools import setup, find_packages
import os.path

setup (
	name='myproject',
	version = "4.19",
	packages = find_packages(),  
	# package_dir={'mypkg': 'src/mypkg'},  # didnt use this.
	package_data = {
        # If any package contains *.txt or *.rst files, include them:
        '': ['*.txt', '*.xml', '*.special', '*.huh'],
	},

#
	# Oddly enough, include_package_data=True prevented package_data from working.
	# include_package_data=True, # Commented out.
	data_files=[
#				('bitmaps', ['bm/b1.gif', 'bm/b2.gif']),
		('/opt/local/myproject/etc', ['myproject/config/settings.py', 'myproject/config/other_settings.special']),
		('/opt/local/myproject/etc', [os.path.join('myproject/config', 'cool.huh')]),
#
		('/opt/local/myproject/etc', [os.path.join('myproject/config', 'other_settings.xml')]),
		('/opt/local/myproject/data', [os.path.join('myproject/words', 'word_set.txt')]),
	],

	install_requires=[ 'jsonschema',
		'logging', ],
	
	 entry_points = {
		'console_scripts': [
			# Blah...
		], },
)

I run python setup.py sdist for a source distrib (haven't tried binary).

And when inside of a brand new virtual environment, I have a myproject-4.19.tar.gz, file, and I use

(venv) pip install ~/myproject-4.19.tar.gz
...

And other than everything getting installed to my virtual environment's site-packages, those special data files get installed to /opt/local/myproject/data and /opt/local/myproject/etc.

include_package_data=True worked for me.

If you use git, remember to include setuptools-git in install_requires. Far less boring than having a Manifest or including all path in package_data ( in my case it's a django app with all kind of statics )

( pasted the comment I made, as k3-rnc mentioned it's actually helpful as is )

Using setup.cfg (setuptools ≥ 30.3.0)

Starting with setuptools 30.3.0 (released 2016-12-08), you can keep your setup.py very small and move the configuration to a setup.cfg file. With this approach, you could put your package data in an [options.package_data] section:

[options.package_data]
* = *.txt, *.rst
hello = *.msg

In this case, your setup.py can be as short as:

from setuptools import setup
setup()

For more information, see configuring setup using setup.cfg files.

There is some talk of deprecating setup.cfg in favour of pyproject.toml as proposed in PEP 518, but this is still provisional as of 2020-02-21.

Update: This answer is old and the information is no longer valid. All setup.py configs should use import setuptools. I've added a more complete answer at https://stackoverflow.com/a/49501350/64313

---

I solved this by switching to distutils. Looks like distribute is deprecated and/or broken.

from distutils.core import setup

setup(
   name='myapp',
   packages=['myapp'],
   package_data={
      'myapp': ['data/*.txt'],
   },
)

I had the same problem for a couple of days but even this thread wasn't able to help me as everything was confusing. So I did my research and found the following solution:

> Basically in this case, you should do: > > from setuptools import setup >
> setup( > name='myapp', > packages=['myapp'], > package_dir={'myapp':'myapp'}, # the one line where all the magic happens > package_data={ > 'myapp': ['data/*.txt'], > }, > )

The full other stackoverflow answer here

Ancient question and yet... package management of python really leaves a lot to be desired. So I had the use case of installing using pip locally to a specified directory and was surprised both package_data and data_files paths did not work out. I was not keen on adding yet another file to the repo so I ended up leveraging data_files and setup.py option --install-data; something like this

pip install . --install-option="--install-data=$PWD/package" -t package  

Moving the folder containing the package data into to module folder solved the problem for me.

See this question: https://stackoverflow.com/questions/3596979/manifest-in-ignored-on-python-setup-py-install-no-data-files-installed

Just remove the line:

include_package_data=True,

from your setup script, and it will work fine. (Tested just now with latest setuptools.)

I found this post while stuck on the same problem.

My experience contradicts the experiences in the other answers. include_package_data=True does include the data in the bdist! The explanation in the setuptools documentation lacks context and troubleshooting tips, but include_package_data works as advertised.

My setup:

• Windows / Cygwin
• git version 2.21.0
• Python 3.8.1 Windows distribution
• setuptools v47.3.1
• check-manifest v0.42

Here is my how-to guide.

How-to include package data

Here is the file structure for a project I published on PyPI. (It installs the application in __main__.py).

├── LICENSE.md
├── MANIFEST.in
├── my_package
│   ├── __init__.py
│   ├── __main__.py
│   └── _my_data          <---- folder with data
│       ├── consola.ttf   <---- data file
│       └── icon.png      <---- data file
├── README.md
└── setup.py

Starting point

Here is a generic starting point for the setuptools.setup() in setup.py.

setuptools.setup(
    ...
    packages=setuptools.find_packages(),
    ...
)

setuptools.find_packages() includes all of my packages in the distribution. My only package is my_package.

The sub-folder with my data, _my_data, is not considered a package by Python because it does not contain an __init__.py, and so find_packages() does not find it.

A solution often-cited, but incorrect, is to put an empty __init__.py file in the _my_data folder.

This does make it a package, so it does include the folder _my_data in the distribution. But the data files inside _my_data are not included.

So making _my_data into a package does not help.

The solution is:

• the sdist already contains the data files
• add include_package_data=True to include the data files in the bdist as well

Experiment (how to test the solution)

There are three steps to make this a repeatable experiment:

$ rm -fr build/ dist/ my_package.egg-info/
$ check-manifest
$ python setup.py sdist bdist_wheel

I will break these down step-by-step:

1. Clean out the old build:

$ rm -fr build/ dist/ my_package.egg-info/

2. Run check-manifest to be sure MANIFEST.in matches the Git index of files under version control:

$ check-manifest

If MANIFEST.in does not exist yet, create it from the Git index of files under version control:

$ check-manifest --create

Here is the MANIFEST.in that is created:

include *.md
recursive-include my_package *.png
recursive-include my_package *.ttf

There is no reason to manually edit this file.

As long as everything that should be under version control is under version control (i.e., is part of the Git index), check-manifest --create does the right thing.

Note: files are not part of the Git index if they are either:

• ignored in a .gitignore
• excluded in a .git/info/exclude
• or simply new files that have not been added to the index yet

And if any files are under version control that should not be under version control, check-manifest issues a warning and specifies which files it recommends removing from the Git index.

3. Build:

$ python setup.py sdist bdist_wheel

Now inspect the sdist (source distribution) and bdist_wheel (build distribution) to see if they include the data files.

Look at the contents of the sdist (only the relevant lines are shown below):

$ tar --list -f dist/my_package-0.0.1a6.tar.gz
my_package-0.0.1a6/
...
my_package-0.0.1a6/my_package/__init__.py
my_package-0.0.1a6/my_package/__main__.py
my_package-0.0.1a6/my_package/_my_data/
my_package-0.0.1a6/my_package/_my_data/consola.ttf <-- yay!
my_package-0.0.1a6/my_package/_my_data/icon.png    <-- yay!
...

So the sdist already includes the data files because they are listed in MANIFEST.in. There is nothing extra to do to include the data files in the sdist.

Look at the contents of the bdist (it is a .zip file, parsed with zipfile.ZipFile):

$ python check-whl.py
my_package/__init__.py
my_package/__main__.py
my_package-0.0.1a6.dist-info/LICENSE.md
my_package-0.0.1a6.dist-info/METADATA
my_package-0.0.1a6.dist-info/WHEEL
my_package-0.0.1a6.dist-info/entry_points.txt
my_package-0.0.1a6.dist-info/top_level.txt
my_package-0.0.1a6.dist-info/RECORD

Note: you need to create your own check-whl.py script to produce the above output. It is just three lines:

from zipfile import ZipFile
path = "dist/my_package-0.0.1a6-py3-none-any.whl" # <-- CHANGE
print('\n'.join(ZipFile(path).namelist()))

As expected, the bdist is missing the data files.

The _my_data folder is completely missing.

What if I create a _my_data/__init__.py? I repeat the experiment and I find the data files are still not there! The _my_data/ folder is included but it does not contain the data files!

Solution

Contrary to the experience of others, this does work:

setuptools.setup(
    ...
    packages=setuptools.find_packages(),
    include_package_data=True, # <-- adds data files to bdist
    ...
)

With the fix in place, redo the experiment:

$ rm -fr build/ dist/ my_package.egg-info/
$ check-manifest
$ python.exe setup.py sdist bdist_wheel

Make sure the sdist still has the data files:

$ tar --list -f dist/my_package-0.0.1a6.tar.gz
my_package-0.0.1a6/
...
my_package-0.0.1a6/my_package/__init__.py
my_package-0.0.1a6/my_package/__main__.py
my_package-0.0.1a6/my_package/_my_data/
my_package-0.0.1a6/my_package/_my_data/consola.ttf <-- yay!
my_package-0.0.1a6/my_package/_my_data/icon.png    <-- yay!
...

Look at the contents of the bdist:

$ python check-whl.py
my_package/__init__.py
my_package/__main__.py
my_package/_my_data/consola.ttf        <--- yay!
my_package/_my_data/icon.png           <--- yay!
my_package-0.0.1a6.dist-info/LICENSE.md
my_package-0.0.1a6.dist-info/METADATA
my_package-0.0.1a6.dist-info/WHEEL
my_package-0.0.1a6.dist-info/entry_points.txt
my_package-0.0.1a6.dist-info/top_level.txt
my_package-0.0.1a6.dist-info/RECORD

How not to test if data files are included

I recommend troubleshooting/testing using the approach outlined above to inspect the sdist and bdist.

pip install in editable mode is not a valid test

Note: pip install -e . does not show if data files are included in the bdist.

The symbolic link causes the installation to behave as if the data files are included (because they already exist locally on the developer's computer).

After pip install my_package, the data files are in the virtual environment's lib/site-packages/my_package/ folder, using the exact same file structure shown above in the list of the whl contents.

Publishing to TestPyPI is a slow way to test

Publishing to TestPyPI and then installing and looking in lib/site-packages/my_packages is a valid test, but it is too time-consuming.

Like others in this thread, I'm more than a little surprised at the combination of longevity and still a lack of clarity, BUT the best answer for me was using check-manifest as recommended in the answer from @mike-gazes

So, using just a setup.cfg and no setup.py and additional text and python files required in the package, what worked for me was keeping this in setup.cfg:

[options]
packages = find:
include_package_data = true

and updating the MANIFEST.in based on the check-manifest output:

include *.in
include *.txt
include *.yml
include LICENSE
include tox.ini
recursive-include mypkg *.py
recursive-include mypkg *.txt

For a directory structure like:

foo/
├── foo
│   ├── __init__.py
│   ├── a.py
│   └── data.txt
└── setup.py

and setup.py

#!/usr/bin/env python
# -*- coding: utf-8 -*-

from setuptools import setup


NAME = 'foo'
DESCRIPTION = 'Test library to check how setuptools works'
URL = 'https://none.com'
EMAIL = '[email protected]'
AUTHOR = 'KT'
REQUIRES_PYTHON = '>=3.6.0'

setup(
    name=NAME,
    version='0.0.0',
    description=DESCRIPTION,
    author=AUTHOR,
    author_email=EMAIL,
    python_requires=REQUIRES_PYTHON,
    url=URL,
    license='MIT',
    classifiers=[
        'Programming Language :: Python',
        'Programming Language :: Python :: 3',
        'Programming Language :: Python :: 3.6',
    ],
    packages=['foo'],
    package_data={'foo': ['data.txt']},
    include_package_data=True,
    install_requires=[],
    extras_require={},
    cmdclass={},
)

python setup.py bdist_wheel works.