How can I delete all Git branches which have been merged?
GitGithubVersion ControlBranchFeature BranchGit Problem Overview
I have many Git branches. How do I delete branches which have already been merged? Is there an easy way to delete them all instead of deleting them one by one?
Git Solutions
Solution 1 - Git
UPDATE:
You can add other branches to exclude like master and dev if your workflow has those as a possible ancestor. Usually I branch off of a "sprint-start" tag and master, dev and qa are not ancestors.
First, list locally-tracking branches that were merged in remote (you may consider to use -r flag to list all remote-tracking branches as suggested in other answers).
git branch --merged
You might see few branches you don't want to remove. we can add few arguments to skip important branches that we don't want to delete like master or a develop. The following command will skip master branch and anything that has dev in it.
git branch --merged| egrep -v "(^\*|master|main|dev)"
If you want to skip, you can add it to the egrep command like the following. The branch skip_branch_name
will not be deleted.
git branch --merged| egrep -v "(^\*|master|main|dev|skip_branch_name)"
To delete all local branches that are already merged into the currently checked out branch:
git branch --merged | egrep -v "(^\*|master|main|dev)" | xargs git branch -d
You can see that master and dev are excluded in case they are an ancestor.
You can delete a merged local branch with:
git branch -d branchname
If it's not merged, use:
git branch -D branchname
To delete it from the remote use:
git push --delete origin branchname
git push origin :branchname # for really old git
Once you delete the branch from the remote, you can prune to get rid of remote tracking branches with:
git remote prune origin
or prune individual remote tracking branches, as the other answer suggests, with:
git branch -dr branchname
Solution 2 - Git
To delete all branches on remote that are already merged:
git branch -r --merged | grep -v master | sed 's/origin\//:/' | xargs -n 1 git push origin
In more recent versions of Git
git branch -r --merged | grep -v master | sed 's/origin\///' | xargs -n 1 git push --delete origin
UPDATE (by @oliver; since does not fit in comment, but enough answers already): if you are on branch ABC then ABC will appear in the results of git branch -r --merged
because the branch is not specified, so branch defaults to current branch, and a branch always qualifies as merged to itself (because there are no differences between a branch and itself!).
So either specify the branch:
git branch -r --merged master | grep -v master ...
OR first checkout master:
git checkout master | git branch -r --merged | grep -v ...
Solution 3 - Git
Just extending Adam's answer a little bit:
Add this to your Git configuration by running git config -e --global
[alias]
cleanup = "!git branch --merged | grep -v '\\*\\|master\\|develop' | xargs -n 1 -r git branch -d"
And then you can delete all the local merged branches doing a simple git cleanup
.
Solution 4 - Git
You'll want to exclude the master
, main
& develop
branches from those commands.
Local git clear:
git branch --merged | grep -v '\*\|master\|main\|develop' | xargs -n 1 git branch -d
Remote git clear:
git branch -r --merged | grep -v '\*\|master\|main\|develop' | sed 's/origin\///' | xargs -n 1 git push --delete origin
Sync local registry of remote branches:
git fetch -p
Solution 5 - Git
This also works to delete all merged branches except master.
git branch --merged | grep -v '^* master$' | grep -v '^ master$' | xargs git branch -d
Solution 6 - Git
For those of you that are on Windows and prefer PowerShell scripts, here is one that deletes local merged branches:
function Remove-MergedBranches
{
git branch --merged |
ForEach-Object { $_.Trim() } |
Where-Object {$_ -NotMatch "^\*"} |
Where-Object {-not ( $_ -Like "*master" or $_ -Like "*main")} |
ForEach-Object { git branch -d $_ }
}
Or the short version:
git branch --merged | %{$_.trim()} | ?{$_ -notmatch 'dev' -and $_ -notmatch 'master' -and $_ -notmatch 'main'} | %{git branch -d $_.trim()}
Solution 7 - Git
I've used Adam's answer for years now. That said, that there are some cases where it wasn't behaving as I expected:
- branches that contained the word "master" were ignored, e.g. "notmaster" or "masterful", rather than only the master branch
- branches that contained the word "dev" were ignored, e.g. "dev-test", rather than only the dev branch
- deleting branches that are reachable from the HEAD of the current branch (that is, not necessarily master)
- in detached HEAD state, deleting every branch reachable from the current commit
1 & 2 were straightforward to address, with just a change to the regex.
3 depends on the context of what you want (i.e. only delete branches that haven't been merged into master or against your current branch).
4 has the potential to be disastrous (although recoverable with git reflog
), if you unintentionally ran this in detached HEAD state.
Finally, I wanted this to all be in a one-liner that didn't require a separate (Bash|Ruby|Python) script.
TL;DR
Create a git alias "sweep" that accepts an optional -f
flag:
git config --global alias.sweep '!git branch --merged $([[ $1 != "-f" ]] \
&& git rev-parse master) | egrep -v "(^\*|^\s*(master|develop)$)" \
| xargs git branch -d'
and invoke it with:
git sweep
or:
git sweep -f
The long, detailed answer
It was easiest for me to create an example git repo with some branches and commits to test the correct behavior:
Create a new git repo with a single commit
mkdir sweep-test && cd sweep-test && git init
echo "hello" > hello
git add . && git commit -am "initial commit"
Create some new branches
git branch foo && git branch bar && git branch develop && git branch notmaster && git branch masterful
git branch --list
> bar > develop > foo > * master > masterful > notmaster
Desired behavior: select all merged branches except: master, develop or current
The original regex misses the branches "masterful" and "notmaster" :
git checkout foo
git branch --merged | egrep -v "(^\*|master|dev)"
> bar
With the updated regex (which now excludes "develop" rather than "dev"):
git branch --merged | egrep -v "(^\*|^\s*(master|develop)$)"
> bar > masterful > notmaster
Switch to branch foo, make a new commit, then checkout a new branch, foobar, based on foo:
echo "foo" > foo
git add . && git commit -am "foo"
git checkout -b foobar
echo "foobar" > foobar
git add . && git commit -am "foobar"
My current branch is foobar, and if I re-run the above command to list the branches I want to delete, the branch "foo" is included even though it hasn't been merged into master:
git branch --merged | egrep -v "(^\*|^\s*(master|develop)$)"
> bar > foo > masterful > notmaster
However, if I run the same command on master, the branch "foo" is not included:
git checkout master && git branch --merged | egrep -v "(^\*|^\s*(master|develop)$)"
> bar > masterful > notmaster
And this is simply because git branch --merged
defaults to the HEAD of the current branch if not otherwise specified. At least for my workflow, I don't want to delete local branches unless they've been merged to master, so I prefer the following variant using git rev-parse:
git checkout foobar
git branch --merged $(git rev-parse master) | egrep -v "(^\*|^\s*(master|develop)$)"
> bar > masterful > notmaster
Detached HEAD state
Relying on the default behavior of git branch --merged
has even more significant consequences in detached HEAD state:
git checkout foobar
git checkout HEAD~0
git branch --merged | egrep -v "(^\*|^\s*(master|develop)$)"
> bar > foo > foobar > masterful > notmaster
This would have deleted the branch I was just on, "foobar" along with "foo", which is almost certainly not the desired outcome. With our revised command, however:
git branch --merged $(git rev-parse master) | egrep -v "(^\*|^\s*(master|develop)$)"
> bar > masterful > notmaster
One line, including the actual delete
git branch --merged $(git rev-parse master) | egrep -v "(^\*|^\s*(master|develop)$)" | xargs git branch -d
All wrapped up into a git alias "sweep":
git config --global alias.sweep '!git branch --merged $([[ $1 != "-f" ]] \
&& git rev-parse master) | egrep -v "(^\*|^\s*(master|develop)$)" \
| xargs git branch -d'
The alias accepts an optional -f
flag. The default behavior is to only delete branches that have been merged into master, but the -f
flag will delete branches that have been merged into the current branch.
git sweep
> Deleted branch bar (was 9a56952). > Deleted branch masterful (was 9a56952). > Deleted branch notmaster (was 9a56952).
git sweep -f
> Deleted branch foo (was 2cea1ab).
Solution 8 - Git
Git Sweep does a great job of this.
Solution 9 - Git
Using Git version 2.5.0:
git branch -d `git branch --merged`
Solution 10 - Git
If you're on Windows you can use Windows Powershell or Powershell 7 with Out-GridView to have a nice list of branches and select with mouse which one you want to delete:
git branch --format "%(refname:short)" --merged | Out-GridView -PassThru | % { git branch -d $_ }
after clicking OK Powershell will pass this branches names to git branch -d
command and delete them
Solution 11 - Git
You can add the commit to the --merged option. This way you can make sure only to remove branches which are merged into i.e. the origin/master
Following command will remove merged branches from your origin.
git branch -r --merged origin/master | grep -v "^.*master" | sed s:origin/:: |xargs -n 1 git push origin --delete
You can test which branches will be removed replacing the git push origin --delete with echo
git branch -r --merged origin/master | grep -v "^.*master" | sed s:origin/:: |xargs -n 1 echo
Solution 12 - Git
I use the following Ruby script to delete my already merged local and remote branches. If I'm doing it for a repository with multiple remotes and only want to delete from one, I just add a select statement to the remotes list to only get the remotes I want.
#!/usr/bin/env ruby
current_branch = `git symbolic-ref --short HEAD`.chomp
if current_branch != "master"
if $?.exitstatus == 0
puts "WARNING: You are on branch #{current_branch}, NOT master."
else
puts "WARNING: You are not on a branch"
end
puts
end
puts "Fetching merged branches..."
remote_branches= `git branch -r --merged`.
split("\n").
map(&:strip).
reject {|b| b =~ /\/(#{current_branch}|master)/}
local_branches= `git branch --merged`.
gsub(/^\* /, '').
split("\n").
map(&:strip).
reject {|b| b =~ /(#{current_branch}|master)/}
if remote_branches.empty? && local_branches.empty?
puts "No existing branches have been merged into #{current_branch}."
else
puts "This will remove the following branches:"
puts remote_branches.join("\n")
puts local_branches.join("\n")
puts "Proceed?"
if gets =~ /^y/i
remote_branches.each do |b|
remote, branch = b.split(/\//)
`git push #{remote} :#{branch}`
end
# Remove local branches
`git branch -d #{local_branches.join(' ')}`
else
puts "No branches removed."
end
end
Solution 13 - Git
How to delete merged branches in PowerShell console
git branch --merged | %{git branch -d $_.Trim()}
If you want to exclude master or any other branch names, you can pipe with PowerShell Select-String like this and pass the result to git branch -d
:
git branch -d $(git branch --merged | Select-String -NotMatch "master" | %{$_.ToString().Trim()})
Solution 14 - Git
kuboon's answer missed deleting branches which have the word master in the branch name. The following improves on his answer:
git branch -r --merged | grep -v "origin/master$" | sed 's/\s*origin\///' | xargs -n 1 git push --delete origin
Of course, it does not delete the "master" branch itself :)
Solution 15 - Git
Note: I am not happy with previous answers, (not working on all systems, not working on remote, not specifying the --merged branch, not filtering exactly). So, I add my own answer.
There are two main cases:
Local
You want to delete local branches that are already merged to another local branch. During the deletion, you want to keep some important branches, like master, develop, etc.
git branch --format "%(refname:short)" --merged master | grep -E -v '^master$|^feature/develop$' | xargs -n 1 git branch -d
Notes:
git branch output --format
".." is to strip whitespaces and allow exact grep matchinggrep -E
is used instead ofegrep
, so it works also in systems without egrep (i.e.: git for windows).grep -E -v '^master$|^feature/develop$'
is to specify local branches that I don't want to deletexargs -n 1 git branch -d
: perform the deletion of local branches (it won't work for remote ones)- of course you get an error if you try deleting the branch currently checked-out. So, I suggest to switch to master beforehand.
Remote
You want to delete remote branches that are already merged to another remote branch. During the deletion, you want to keep some important branches, like HEAD, master, releases, etc.
git branch -r --format "%(refname:short)" --merged origin/master | grep -E -v '^*HEAD$|^*/master$|^*release' | cut -d/ -f2- | xargs -n 1 git push --delete origin
Notes:
- for remote, we use the
-r
option and provide the full branch name:origin/master
grep -E -v '^*HEAD$|^*/master$|^*release'
is to match the remote branches that we don't want to delete.cut -d/ -f2-
: remove the unneeded 'origin/' prefix that otherwise is printed out by thegit branch
command.xargs -n 1 git push --delete origin
: perform the deletion of remote branches.
Solution 16 - Git
You can use gbda
alias if you're using OhMyZSH with git plugin.
Solution 17 - Git
I use this:
git branch --delete $(git branch --format '%(refname:short)' --merged | grep --invert-match 'main\|master\|branch-to-skip')
It lists all merged branched in the specified format, then it feeds that list to git branch --delete.
Solution 18 - Git
There is no command in Git that will do this for you automatically. But you can write a script that uses Git commands to give you what you need. This could be done in many ways depending on what branching model you are using.
If you need to know if a branch has been merged into master the following command will yield no output if myTopicBranch has been merged (i.e. you can delete it)
$ git rev-list master | grep $(git rev-parse myTopicBranch)
You could use the Git branch command and parse out all branches in Bash and do a for
loop over all branches. In this loop you check with above command if you can delete the branch or not.
Solution 19 - Git
My favorite and simple script:
git branch --merged | grep -E -v "(master|develop|other)" | xargs git branch -d
Solution 20 - Git
git branch --merged | grep -Ev '^(. master|\*)' | xargs -n 1 git branch -d
will delete all local branches except the current checked out branch and/or master
.
Here's a helpful article for those looking to understand these commands: Git Clean: Delete Already Merged Branches, by Steven Harman.
Solution 21 - Git
You can use git-del-br
tool.
git-del-br -a
You can install it via pip
using
pip install git-del-br
P.S: I am the author of the tool. Any suggestions/feedback are welcome.
Solution 22 - Git
I use a git-flow esque naming scheme, so this works very safely for me:
git branch --merged | grep -e "^\s\+\(fix\|feature\)/" | xargs git branch -d
It basically looks for merged commits that start with either string fix/
or feature/
.
Solution 23 - Git
If you'd like to delete all local branches that are already merged in to the branch that you are currently on, then I've come up with a safe command to do so, based on earlier answers:
git branch --merged | grep -v \* | grep -v '^\s*master$' | xargs -t -n 1 git branch -d
This command will not affect your current branch or your master branch. It will also tell you what it's doing before it does it, using the -t flag of xargs.
Solution 24 - Git
Alias version of Adam's updated answer:
[alias]
branch-cleanup = "!git branch --merged | egrep -v \"(^\\*|master|dev)\" | xargs git branch -d #"
Also, see this answer for handy tips on escaping complex aliases.
Solution 25 - Git
git bash installed egrep -v will not work
On Windows withgit branch --merged | grep -E -v "(master|test|dev)" | xargs git branch -d
where grep -E -v
is equivalent of egrep -v
Use -d
to remove already merged branches or
-D
to remove unmerged branches
Solution 26 - Git
The accepted solution is pretty good, but has the one issue that it also deletes local branches that were not yet merged into a remote.
If you look at the output of you will see something like
$ git branch --merged master -v
api_doc 3a05427 [gone] Start of describing the Java API
bla 52e080a Update wording.
branch-1.0 32f1a72 [maven-release-plugin] prepare release 1.0.1
initial_proposal 6e59fb0 [gone] Original proposal, converted to AsciiDoc.
issue_248 be2ba3c Skip unit-for-type checking. This needs more work. (#254)
master be2ba3c Skip unit-for-type checking. This needs more work. (#254)
Branches bla
and issue_248
are local branches that would be deleted silently.
But you can also see the word [gone]
, which indicate branches that had been pushed to a remote (which is now gone) and thus denote branches can be deleted.
The original answer can thus be changed to (split into multiline for shorter line length)
git branch --merged master -v | \
grep "\\[gone\\]" | \
sed -e 's/^..//' -e 's/\S* .*//' | \
xargs git branch -d
to protect the not yet merged branches. Also the grepping for master to protect it, is not needed, as this has a remote at origin and does not show up as gone.
Solution 27 - Git
Try the following command:
git branch -d $(git branch --merged | grep -vw $(git rev-parse --abbrev-ref HEAD))
By using git rev-parse
will get the current branch name in order to exclude it. If you got the error, that means there are no local branches to remove.
To do the same with remote branches (change origin
with your remote name), try:
git push origin -vd $(git branch -r --merged | grep -vw $(git rev-parse --abbrev-ref HEAD) | cut -d/ -f2)
In case you've multiple remotes, add grep origin |
before cut
to filter only the origin
.
If above command fails, try to delete the merged remote-tracking branches first:
git branch -rd $(git branch -r --merged | grep -vw $(git rev-parse --abbrev-ref HEAD))
Then git fetch
the remote again and use the previous git push -vd
command again.
If you're using it often, consider adding as aliases into your ~/.gitconfig
file.
In case you've removed some branches by mistake, use git reflog
to find the lost commits.
Solution 28 - Git
Below query works for me
for branch in `git branch -r --merged | grep -v '\*\|master\|develop'|awk 'NR > 0 {print$1}'|awk '{gsub(/origin\//, "")}1'`;do git push origin --delete $branch; done
and this will filter any given branch in the grep pipe.
Works well over http clone, but not so well for the ssh connection.
Solution 29 - Git
Based on some of these answers I made my own Bash script to do it too!
It uses git branch --merged
and git branch -d
to delete the branches that have been merged and prompts you for each of the branches before deleting.
merged_branches(){
local current_branch=$(git rev-parse --abbrev-ref HEAD)
for branch in $(git branch --merged | cut -c3-)
do
echo "Branch $branch is already merged into $current_branch."
echo "Would you like to delete it? [Y]es/[N]o "
read REPLY
if [[ $REPLY =~ ^[Yy] ]]; then
git branch -d $branch
fi
done
}
Solution 30 - Git
As of 2018.07
Add this to [alias]
section of your ~/.gitconfig
:
sweep = !"f() { git branch --merged | egrep -v \"(^\\*|master|dev)\" || true | xargs git branch -d; }; f"
Now you can just call git sweep
to perform that needed cleanup.
Solution 31 - Git
I've been using the following method to remove merged local AND remote branches in one cmd.
I have the following in my bashrc
file:
function rmb {
current_branch=$(git branch --no-color 2> /dev/null | sed -e '/^[^*]/d' -e 's/* \(.*\)/\1/')
if [ "$current_branch" != "master" ]; then
echo "WARNING: You are on branch $current_branch, NOT master."
fi
echo "Fetching merged branches..."
git remote prune origin
remote_branches=$(git branch -r --merged | grep -v '/master$' | grep -v "/$current_branch$")
local_branches=$(git branch --merged | grep -v 'master$' | grep -v "$current_branch$")
if [ -z "$remote_branches" ] && [ -z "$local_branches" ]; then
echo "No existing branches have been merged into $current_branch."
else
echo "This will remove the following branches:"
if [ -n "$remote_branches" ]; then
echo "$remote_branches"
fi
if [ -n "$local_branches" ]; then
echo "$local_branches"
fi
read -p "Continue? (y/n): " -n 1 choice
echo
if [ "$choice" == "y" ] || [ "$choice" == "Y" ]; then
# Remove remote branches
git push origin `git branch -r --merged | grep -v '/master$' | grep -v "/$current_branch$" | sed 's/origin\//:/g' | tr -d '\n'`
# Remove local branches
git branch -d `git branch --merged | grep -v 'master$' | grep -v "$current_branch$" | sed 's/origin\///g' | tr -d '\n'`
else
echo "No branches removed."
fi
fi
}
original source
This doesn't delete the master branch, but removes merged local AND remote branches. Once you have this in you rc file, just run rmb
, you're shown a list of merged branches that will be cleaned and asked for confirmation on the action. You can modify the code to not ask for confirmation as well, but it's probably good to keep it in.
Solution 32 - Git
Write a script in which Git checks out all the branches that have been merged to master.
Then do git checkout master
.
Finally, delete the merged branches.
for k in $(git branch -ra --merged | egrep -v "(^\*|master)"); do
branchnew=$(echo $k | sed -e "s/origin\///" | sed -e "s/remotes\///")
echo branch-name: $branchnew
git checkout $branchnew
done
git checkout master
for k in $(git branch -ra --merged | egrep -v "(^\*|master)"); do
branchnew=$(echo $k | sed -e "s/origin\///" | sed -e "s/remotes\///")
echo branch-name: $branchnew
git push origin --delete $branchnew
done
Solution 33 - Git
For me git branch --merged
doesn't show branches that were merged via GitHub PR. I'm not sure of the reasons, but I use the following line to delete all local branches that do not have remote tracking branch:
diff <(git branch --format "%(refname:short)") <(git branch -r | grep -v HEAD | cut -d/ -f2-) | grep '<' | cut -c 3- | xargs git branch -D
Explanation:
git branch --format "%(refname:short)"
gives a list of local branchesgit branch -r | grep -v HEAD | cut -d/ -f2-
gives a list of remote branches, filtering outHEAD
diff <(...) <(...)
gives a diff of output of two commands inside parenthesesgrep '<'
filters branches that exist in first list, but not in the secondcut -c 3-
gives line starting from 3rd character, thus removing prefix<
xargs git branch -D
executesgit branch -D
against each branch name
Alternatively, you can avoid grep -v '<'
like this:
diff --old-line-format="%L" --new-line-format="" --unchanged-line-format="" <(git branch --format "%(refname:short)") <(git branch -r | grep -v HEAD | cut -d/ -f2-) | xargs git branch -D
Solution 34 - Git
To avoid accidentally running the command from any other branch than master I use the following bash script. Otherwise, running git branch --merged | grep -v "\*" | xargs -n 1 git branch -d
from a branch that has been merged of off master could delete the master branch.
#!/bin/bash
branch_name="$(git symbolic-ref HEAD 2>/dev/null)" ||
branch_name="(unnamed branch)" # detached HEAD
branch_name=${branch_name##refs/heads/}
if [[ $branch_name == 'master' ]]; then
read -r -p "Are you sure? [y/N] " response
if [[ $response =~ ^([yY][eE][sS]|[yY])$ ]]; then
git branch --merged | grep -v "\*" | xargs -n 1 git branch -d
fi
else
echo "Refusing to delete branches that are not merged into '$branch_name'. Checkout master first."
fi
Solution 35 - Git
The simplest way I found to do it removing only local branches, not remote ones:
$ git branch --merged | grep -v master | xargs -n 1 git branch -D
This command will delete only branches already merged in your master one. Be careful if you don't want to delete other branches, such as a staging
.
Solution 36 - Git
To delete merged branches, git-delete-merged-branches is more robust and more convenient than shell hacks. It also detects rebase merges and squash merges. Its readme has more details.
Solution 37 - Git
To delete local branches that have been merged to master branch I'm using the following alias (git config -e --global
):
cleanup = "!git branch --merged master | grep -v '^*\\|master' | xargs -n 1 git branch -D"
I'm using git branch -D
to avoid error: The branch 'some-branch' is not fully merged.
messages while my current checkout is different from master branch.
Solution 38 - Git
Let's say I have a remote named upstream and an origin (GitHub style, my fork is origin, upstream is upstream).
I don't want to delete ANY masters, HEAD, or anything from the upstream. I also don't want to delete the develop branch as that is our common branch we create PRs from.
List all remote branches, filtered by ones that were merged:
git branch -r
Remove lines from that list that contain words I know are in branch names I don't want to remove:
sed '/develop\|master\|HEAD\|upstream/d'
Remove the remote name from the reference name (origin/somebranch becomes somebranch):
sed 's/.*\///'
Use xargs to call a one-liner:
xargs git push --delete origin
Pipe it all together you get:
git branch -r --merged | sed '/develop\|master\|HEAD\|upstream/d' | sed 's/.*\///' | xargs git push --delete origin
This will leave me with only some branches that I have worked on, but have not merged. You can then remove them one by one as there shouldn't be too many.
Find branches you no longer want:
git branch -ar
Say you find branch1, branch2, and branch3 you want to delete:
git push --delete origin branch1 branch2 branch3
Solution 39 - Git
$ git config --global alias.cleanup
'!git branch --merged origin/master | egrep -v "(^\*|master|staging|dev)" | xargs git branch -d'
(Split into multiple lines for readability)
Calling "git cleanup" will delete local branches that have already been merged into origin/master. It skips master, staging, and dev because we don't want to delete those in normal circumstances.
Breaking this down, this is what it's doing:
git config --global alias.cleanup
- This is creating a global alias called "cleanup" (across all your repos)
- The
!
at the beginning of the command is saying that we will be using some non-git commands as part of this alias so we need to actually run bash commands here git branch --merged origin/master
- This command returns the list of branch names that have already been merged into
origin/master
egrep -v "(^\*|master|staging|dev)"
- This removes the master, staging, and dev branch from the list of branches that have already been merged. We don't want to remove these branches since they are not features.
xargs git branch -d
- This will run the
git branch -d xxxxx
command for each of the unmerged branches. This deletes the local branches one by one.
Solution 40 - Git
For Windows you can install Cygwin and remove all remote branches using following command:
git branch -r --merged | "C:\cygwin64\bin\grep.exe" -v master | "C:\cygwin64\bin\sed.exe" 's/origin\///' | "C:\cygwin64\bin\xargs.exe" -n 1 git push --delete origin
Solution 41 - Git
Just created python script for that:
import sys
from shutil import which
import logging
from subprocess import check_output, call
logger = logging.getLogger(__name__)
if __name__ == '__main__':
if which("git") is None:
logger.error("git is not found!")
sys.exit(-1)
branches = check_output("git branch -r --merged".split()).strip().decode("utf8").splitlines()
current = check_output("git branch --show-current".split()).strip().decode("utf8")
blacklist = ["master", current]
for b in branches:
b = b.split("/")[-1]
if b in blacklist:
continue
else:
if input(f"Do you want to delete branch: '{b}' [y/n]\n").lower() == "y":
call(f"git branch -D {b}".split())
call(f"git push --delete origin {b}".split())
Solution 42 - Git
git cleanup
script from the git-toolbelt
> Deletes all branches that have already been merged into master or > develop. Keeps other branches lying around. Will be most conservative with deletions. > > Removes branches both locally and in the origin remote.
Solution 43 - Git
Windoze-friendly Python script (because git-sweep
choked on Wesnoth repository):
#!/usr/bin/env python
# Remove merged git branches. Cross-platform way to execute:
#
# git branch --merged | grep -v master | xargs git branch -d
#
# Requires gitapi - https://bitbucket.org/haard/gitapi
# License: Public Domain
import gitapi
repo = gitapi.Repo('.')
output = repo.git_command('branch', '--merged').strip()
for branch in output.split('\n'):
branch = branch.strip()
if branch.strip(' *') != 'master':
print(repo.git_command('branch', '-d', branch).strip())
Solution 44 - Git
If you are using branching model like HubFlow or GitFlow you can use this command to remove the merged feature branches:
git branch --merged | grep feature.* | grep -v "\*" | xargs -n 1 git branch -d
Solution 45 - Git
If you wish to delete local branches that have been merged as well as delete their remotes here's the one-liner I prefer:
git branch --merged | xargs -I_br -- sh -c 'git branch -d _br; git push origin --delete _br'
Solution 46 - Git
My Bash script contribution is based loosely on mmrobin's answer.
It takes some useful parameters specifying includes and excludes, or to examine/remove only local or remote branches instead of both.
#!/bin/bash
# exclude branches regex, configure as "(branch1|branch2|etc)$"
excludes_default="(master|next|ag/doc-updates)$"
excludes="__NOTHING__"
includes=
merged="--merged"
local=1
remote=1
while [ $# -gt 0 ]; do
case "$1" in
-i) shift; includes="$includes $1" ;;
-e) shift; excludes="$1" ;;
--no-local) local=0 ;;
--no-remote) remote=0 ;;
--all) merged= ;;
*) echo "Unknown argument $1"; exit 1 ;;
esac
shift # next option
done
if [ "$includes" == "" ]; then
includes=".*"
else
includes="($(echo $includes | sed -e 's/ /|/g'))"
fi
current_branch=$(git branch --no-color 2> /dev/null | sed -e '/^[^*]/d' -e 's/* \(.*\)/\1/')
if [ "$current_branch" != "master" ]; then
echo "WARNING: You are on branch $current_branch, NOT master."
fi
echo -e "Fetching branches...\n"
git remote update --prune
remote_branches=$(git branch -r $merged | grep -v "/$current_branch$" | grep -v -E "$excludes" | grep -v -E "$excludes_default" | grep -E "$includes")
local_branches=$(git branch $merged | grep -v "$current_branch$" | grep -v -E "$excludes" | grep -v -E "$excludes_default" | grep -E "$includes")
if [ -z "$remote_branches" ] && [ -z "$local_branches" ]; then
echo "No existing branches have been merged into $current_branch."
else
echo "This will remove the following branches:"
if [ "$remote" == 1 -a -n "$remote_branches" ]; then
echo "$remote_branches"
fi
if [ "$local" == 1 -a -n "$local_branches" ]; then
echo "$local_branches"
fi
read -p "Continue? (y/n): " -n 1 choice
echo
if [ "$choice" == "y" ] || [ "$choice" == "Y" ]; then
if [ "$remote" == 1 ]; then
remotes=$(git remote)
# Remove remote branches
for remote in $remotes
do
branches=$(echo "$remote_branches" | grep "$remote/" | sed "s/$remote\/\(.*\)/:\1 /g" | tr -d '\n')
git push $remote $branches
done
fi
if [ "$local" == 1 ]; then
# Remove local branches
locals=$(echo "$local_branches" | sed 's/origin\///g' | tr -d '\n')
if [ -z "$locals" ]; then
echo "No branches removed."
else
git branch -d $(echo "$locals" | tr -d '\n')
fi
fi
fi
fi
Solution 47 - Git
git-delete-merged-branches
from git-extras
repo.
https://github.com/tj/git-extras/blob/master/Commands.md#git-delete-merged-branches
Solution 48 - Git
Given you want to delete the merged branches, you need to delete the remote-tracking branches only, unless you state otherwise.
So to delete those branches you can do it by
git branch --remote --merged origin/master | egrep -v "(^\*|master|development)" | cut -b 10- | xargs git push --delete origin
This will delete all merged branches (merged to master) except master
and development
.
Solution 49 - Git
The following creates an alias git cleanup
with one optional parameter branch. By default it uses the default branch of remote origin. Every branch that has been merged into this will be deleted. There also is a -d
/--dryrun
option to show what would be deleted.
Setup
git config --global alias.cleanup '!COMMAND="git branch -D"; while [[ $# -gt 0 ]]; do case "$1" in -d|--dryrun) COMMAND="echo"; shift; ;; *) MAIN_BRANCH="$1"; shift;; esac; done; MAIN_BRANCH="${MAIN_BRANCH:-$(git symbolic-ref refs/remotes/origin/HEAD)}"; git for-each-ref --merged="$MAIN_BRANCH" --no-contains="$MAIN_BRANCH" --format="%(refname:short)" refs/heads/ | xargs -n1 -r $COMMAND;#'
Usage:
git cleanup # delete all branches that have been merged into origin/HEAD
git cleanup master2 # delete all branches that have been merged into master2
git cleanup master2 -d # do a dryrun (show names of branches that would be delted)
Readable code
Who can read that "oneliner"? Well here you go
COMMAND="git branch -D";
while [[ $# -gt 0 ]]; do
case "$1" in
-d|--dryrun)
COMMAND="echo";
shift;
;;
*)
MAIN_BRANCH="$1";
shift
;;
esac;
done;
MAIN_BRANCH="${MAIN_BRANCH:-$(git symbolic-ref refs/remotes/origin/HEAD)}";
git for-each-ref --merged="$MAIN_BRANCH" --no-contains="$MAIN_BRANCH" --format="%(refname:short)" refs/heads/ | xargs -n1 -r $COMMAND;
#
What is different to the other answers?
- uses
--no-contains
option to filter out the identity branch (branch into which all other branches that are deleted have been merged) instead ofgrep -v
(this works better if you are specific about your branch and specify refs/heads/master for example) - uses the remote HEAD to check for the default branch name
- has a parameter to specify which branch to use as merge master
- has a dryrun option