Hide select option in IE using jQuery
JavascriptJqueryHtml SelectJavascript Problem Overview
Currently I am using jQuery to hide/show select options using following code.
$("#custcol7 option[value=" + sizeValue + "]").hide();
This works fine in Firefox, but doesnt do any good in other browsers. How to I hide options from select in Chrome, Opera and IE?
Javascript Solutions
Solution 1 - Javascript
I just came across this and instead of cloning the entire select over and over I just replaced the options that need to be hidden with span elements and hiding the spans ( though the browser didnt visually show them anyway, I think ) - you may need to change your code ( if complex ) to iterate through the spans for complex logic.
The spans store a reference to the option and replace themselves with it when they need to be shown.
This code can obviously be refactored and prettified.
http://fiddle.jshell.net/FAkEK/12/show/
EDIT #2 ( USE THIS INSTEAD ): It occurred to me that instead of doing all this clone/reference/replace crap, just wrap the option with a span, hide the span, and on show just replace the span with the option again..
Solution 2 - Javascript
I think meder has provided valid answer and here it is slightly changed to reflect what works for me:
$.fn.optVisible = function( show ) {
if( show ) {
this.filter( "span > option" ).unwrap();
} else {
this.filter( ":not(span > option)" ).wrap( "<span>" ).parent().hide();
}
return this;
}
Tested with (long live BrowserStack):
- Windows XP: IE 6.0, Firefox 3.0, Safari 4.0, Opera 10.0, Chrome 14.0
- Windows 8: IE 10.0 Metro
- iOS 3.2 (iPad), iOS 6.0 (iPhone 5)
- Android 1.6 (Sony Xperia X10)
Solution 3 - Javascript
You don't, it's not supported in IE (and assumably not in Chrome or Opera either). You would have to remove the options altogether and add them back later if you want them to be truly invisible. But in most cases a simple disabled="disabled" should suffice and is a heck of a lot simpler than handling the removing and adding of options.
Solution 4 - Javascript
try detach(). you can reattach it later if needed using append() or insertAfter()
Solution 5 - Javascript
To Remove options use:
var opt=$("option").detach();
To show options use:
opt.appendTo( "select" );
Solution 6 - Javascript
Just deleted it and store it in a var in your JavaScript. You can just create the new object when you need it later.
Otherwise try the disabled attribute mentioned above.
Solution 7 - Javascript
/**
* Change visibility of select list option elements
* @param {boolean} stateVal show hidden options if true; hide it otherwise. If not setted then toggle visibility, based on it's current state
*/
$.fn.toggleOptionVisibility = function (stateVal) {
var isBool = typeof stateVal === "boolean";
return this.each(function () {
var $this = $(this);
if (isBool) {
if (stateVal) $this.filter("span > option").unwrap();
else $this.filter(":not(span > option)").wrap("<span>").parent().hide();
}
else {
$this.filter("span > option").toggleOptionVisibility(true);
$this.filter(":not(span > option)").toggleOptionVisibility(false);
}
});
};
Solution 8 - Javascript
the way you did it should work in chrome but nvm.Here is another way
select = $('#custcol7');
select.find('option[value=["'+sizeValue +'"]').remove();
and if you want to show it again:
select.append('<option value="'+sizeValue+'"></option>');
It works perfectly on every browser and its really simple code. The problem is if you want to hide several options it is more typing .. but that can be solved by putting them into variables if they don't change dynamically like that :
var options = '<option value="'+sizeValue1+'"></option><option value="'+sizeValue2+'"></option><option value="'+sizeValue3+'"></option>';
select.append(options);
This way if you have to remove/append on several places you only typed the options once.Hope i gave another interesting option. Best Regards.
Solution 9 - Javascript
There's also the the .load method:
s_parent.change(function(){
s_child.load('./fetch_options.php",{'v',s_parent.val()});
}
The 'fetch_options.php' script would simply print the option tags based on whatever data source you use and the parent value(s) being passed in.
Solution 10 - Javascript
using the solution provided by AuthorProxy, it works fine for IE but when I attempt to do a .val() on the dropdown in firefox I get some funky values that don't make any sense. I have modified their option to include browser specific functionality, hide/show works for firefox.
$.fn.toggleOptionVisibility = function (stateVal) {
var isBool = typeof stateVal === "boolean";
return this.each(function () {
var $this = $(this);
if (navigator.userAgent.indexOf('MSIE') > -1 || navigator.userAgent.indexOf('Trident') > -1) {
if (isBool) {
if (stateVal) $this.filter("span > option").unwrap();
else $this.filter(":not(span > option)").wrap("<span>").parent().hide();
}
else {
$this.filter("span > option").toggleOptionVisibility(true);
$this.filter(":not(span > option)").toggleOptionVisibility(false);
}
}
else {
if (isBool) {
$this.show();
}
else {
$this.hide();
}
}
});
};
Solution 11 - Javascript
My take is bit different to other answers.
The aim is not to hide the options but just make them disable(to keep the UI consistent).
My Scenario :
I have multiple selects in a form and when an user selects an option in one of the selects the other selects should disable this option and vice versa. User is restricted from selecting the same option which is already selected. We normally disable the option but for IE 7 which does not support it. User also gets an option to add new selects.
Solution :
On load :
If the browser is IE7 then while populating the the selects and disabling the already selected options on other selects I am adding a custom attribute to the option("data-ie7-disabled") and also changing the color of the disabled options to '#cccccc'(which is the standard color for disabled options). This makes the UI look same across browsers.
On Change :
I save the previous option in a local variable(this is saved on focus).
When a user tries to change an option
-
User selects a complete new option which is not selected in any other dropdown. Then I loop through other selects and change the color and add custom attribute to this selected option on other selects.
-
When user selects an option that is already selected(The option which has grayed out color). I check if the option has this custom attribute on it first. If it has then > I simply revert the option to the previous one with an error message saying "This option is already selected or BLAH BLAH".
-
When user changes his existing option to a brand new option which is not selected in any other dropdown's. I again loop through all the other select options and remove the color on it and also the custom attribute.
Hope this helps.
Solution 12 - Javascript
You can use through combinations of var $opt=$('select>option').clone() and $('select option[value="'+val+'"').remove().
There is another example: try this. https://jsfiddle.net/sherali/jkw8fxzf/12/
var $secondOption= $('#second-choice>option').clone();
$("#first-choice").change(function() {
var userSelected = $(this).val();
$('#second-choice').html($secondOption);
$('#second-choice option[value="'+userSelected+'"').remove()
});
Solution 13 - Javascript
You will need to remove it and then add it again for Internet Explorer.
To remove:
$("#custcol7 option[value=" + sizeValue + "]").remove();
To add:
$("#custcol7").append( "<option value='sizeValue'>sizeValue</option>" );
Note that you need to have sizeValue also in the option text, to actually see something.
Solution 14 - Javascript
You can also replace the html within the select.
Html:
<input id="Button1" type="button" value="hide option" />
<select id="foo">
<option >stuff</option>
<option >stuff2</option>
</select>
Jquery:
$("#Button1").change(function () {
$('#foo').html('<option >stuff</option>');
});
Not exactly what you want, but perhaps it helps. For smaller dropdowns, it is definitely easier.
Solution 15 - Javascript
In IE 11(Edge), the following code is working.
$("#id option[value='1']").remove();
and to ad back,
$('<option>').val('1').text('myText').appendTo('#id');
Solution 16 - Javascript
meder's solution is what I went with for this, but with a small tweak to prevent it from wrapping an option in a span that was already in a span:
$.fn.hideOption = function() {
this.each(function() {
if (!$(this).parent().is('span')) {
$(this).wrap('<span>').hide();
}
});
};
$.fn.showOption = function() {
this.each(function() {
var opt = $(this).find('option').show();
$(this).replaceWith(opt);
});
};
Solution 17 - Javascript
<html>
<head><script>
$(document).ready(function(){
$("#l1").change(function(){
var selectedId=$("#dl1 option[value='"+$(this).val()+"']").attr("id");
$("#dl2 option[data-id ='"+selectedId+"']").removeAttr('disabled');
$("#dl2 option[data-id !='"+selectedId+"']").attr('disabled','disabled');
$("#l2").val("");
});
});
</script></head>
<body>
<label for="l1">choose country</label>
<input list="dl1" name="l1" id="l1" type='select'>
<datalist id="dl1" name="dl1">
<option value="India" id=1>
<option value="US" id=2>
<option value="Germany" id=3>
</datalist>
<br>
<label for="l2">choose City</label>
<input list="dl2" name="l2" id="l2" type='select'>
<datalist id="dl2">
<option value="New Delhi" id="11" data-id="1">
<option value="Washington DC" id="12" data-id="2">
<option value="Berlin" id="13" data-id="3">
<option value="Mumbai"id="14" data-id="1">
<option value="NewYork" id="15" data-id="2">
<option value="Munich" id="16" data-id="3">
</datalist>
</body>
</html>
Solution 18 - Javascript
You can use this:
$("#custcol7 option[value=" + sizeValue + "]").css({display:'none'});
It works fine on all browsers except Safari and Opera. I'm searching for another best solution :)