Convert hex string (char []) to int?
CCharIntC Problem Overview
I have a char[] that contains a value such as "0x1800785" but the function I want to give the value to requires an int, how can I convert this to an int? I have searched around but cannot find an answer. Thanks.
C Solutions
Solution 1 - C
Have you tried strtol()?
strtol - convert string to a long integer
Example:
const char *hexstring = "abcdef0";
int number = (int)strtol(hexstring, NULL, 16);
In case the string representation of the number begins with a 0x prefix, one must should use 0 as base:
const char *hexstring = "0xabcdef0";
int number = (int)strtol(hexstring, NULL, 0);
(It's as well possible to specify an explicit base such as 16, but I wouldn't recommend introducing redundancy.)
Solution 2 - C
Or if you want to have your own implementation, I wrote this quick function as an example:
/**
* hex2int
* take a hex string and convert it to a 32bit number (max 8 hex digits)
*/
uint32_t hex2int(char *hex) {
uint32_t val = 0;
while (*hex) {
// get current character then increment
uint8_t byte = *hex++;
// transform hex character to the 4bit equivalent number, using the ascii table indexes
if (byte >= '0' && byte <= '9') byte = byte - '0';
else if (byte >= 'a' && byte <='f') byte = byte - 'a' + 10;
else if (byte >= 'A' && byte <='F') byte = byte - 'A' + 10;
// shift 4 to make space for new digit, and add the 4 bits of the new digit
val = (val << 4) | (byte & 0xF);
}
return val;
}
Solution 3 - C
Something like this could be useful:
char str[] = "0x1800785";
int num;
sscanf(str, "%x", &num);
printf("0x%x %i\n", num, num);
Read man sscanf
Solution 4 - C
Assuming you mean it's a string, how about strtol?
Solution 5 - C
Use strtol if you have libc available like the top answer suggests. However if you like custom stuff or are on a microcontroller without libc or so, you may want a slightly optimized version without complex branching.
#include <inttypes.h>
/**
* xtou64
* Take a hex string and convert it to a 64bit number (max 16 hex digits).
* The string must only contain digits and valid hex characters.
*/
uint64_t xtou64(const char *str)
{
uint64_t res = 0;
char c;
while ((c = *str++)) {
char v = (c & 0xF) + (c >> 6) | ((c >> 3) & 0x8);
res = (res << 4) | (uint64_t) v;
}
return res;
}
The bit shifting magic boils down to: Just use the last 4 bits, but if it is an non digit, then also add 9.
Solution 6 - C
One quick & dirty solution:
// makes a number from two ascii hexa characters
int ahex2int(char a, char b){
a = (a <= '9') ? a - '0' : (a & 0x7) + 9;
b = (b <= '9') ? b - '0' : (b & 0x7) + 9;
return (a << 4) + b;
}
You have to be sure your input is correct, no validation included (one could say it is C). Good thing it is quite compact, it works with both 'A' to 'F' and 'a' to 'f'.
The approach relies on the position of alphabet characters in the ASCII table, let's peek e.g. to Wikipedia (https://en.wikipedia.org/wiki/ASCII#/media/File:USASCII_code_chart.png). Long story short, the numbers are below the characters, so the numeric characters (0 to 9) are easily converted by subtracting the code for zero. The alphabetic characters (A to F) are read by zeroing other than last three bits (effectively making it work with either upper- or lowercase), subtracting one (because after the bit masking, the alphabet starts on position one) and adding ten (because A to F represent 10th to 15th value in hexadecimal code). Finally, we need to combine the two digits that form the lower and upper nibble of the encoded number.
Here we go with same approach (with minor variations):
#include <stdio.h>
// takes a null-terminated string of hexa characters and tries to
// convert it to numbers
long ahex2num(unsigned char *in){
unsigned char *pin = in; // lets use pointer to loop through the string
long out = 0; // here we accumulate the result
while(*pin != 0){
out <<= 4; // we have one more input character, so
// we shift the accumulated interim-result one order up
out += (*pin < 'A') ? *pin & 0xF : (*pin & 0x7) + 9; // add the new nibble
pin++; // go ahead
}
return out;
}
// main function will test our conversion fn
int main(void) {
unsigned char str[] = "1800785"; // no 0x prefix, please
long num;
num = ahex2num(str); // call the function
printf("Input: %s\n",str); // print input string
printf("Output: %x\n",num); // print the converted number back as hexa
printf("Check: %ld = %ld \n",num,0x1800785); // check the numeric values matches
return 0;
}
Solution 7 - C
Try below block of code, its working for me.
char p[] = "0x820";
uint16_t intVal;
sscanf(p, "%x", &intVal);
printf("value x: %x - %d", intVal, intVal);
Output is:
value x: 820 - 2080
Solution 8 - C
So, after a while of searching, and finding out that strtol is quite slow, I've coded my own function. It only works for uppercase on letters, but adding lowercase functionality ain't a problem.
int hexToInt(PCHAR _hex, int offset = 0, int size = 6)
{
int _result = 0;
DWORD _resultPtr = reinterpret_cast<DWORD>(&_result);
for(int i=0;i<size;i+=2)
{
int _multiplierFirstValue = 0, _addonSecondValue = 0;
char _firstChar = _hex[offset + i];
if(_firstChar >= 0x30 && _firstChar <= 0x39)
_multiplierFirstValue = _firstChar - 0x30;
else if(_firstChar >= 0x41 && _firstChar <= 0x46)
_multiplierFirstValue = 10 + (_firstChar - 0x41);
char _secndChar = _hex[offset + i + 1];
if(_secndChar >= 0x30 && _secndChar <= 0x39)
_addonSecondValue = _secndChar - 0x30;
else if(_secndChar >= 0x41 && _secndChar <= 0x46)
_addonSecondValue = 10 + (_secndChar - 0x41);
*(BYTE *)(_resultPtr + (size / 2) - (i / 2) - 1) = (BYTE)(_multiplierFirstValue * 16 + _addonSecondValue);
}
return _result;
}
Usage:
char *someHex = "#CCFF00FF";
int hexDevalue = hexToInt(someHex, 1, 8);
1 because the hex we want to convert starts at offset 1, and 8 because it's the hex length.
Speedtest (1.000.000 calls):
strtol ~ 0.4400s
hexToInt ~ 0.1100s
Solution 9 - C
I have done a similar thing before and I think this might help you.
The following works for me:
int main(){
int co[8];
char ch[8];
printf("please enter the string:");
scanf("%s", ch);
for (int i=0; i<=7; i++) {
if ((ch[i]>='A') && (ch[i]<='F')) {
co[i] = (unsigned int) ch[i]-'A'+10;
} else if ((ch[i]>='0') && (ch[i]<='9')) {
co[i] = (unsigned int) ch[i]-'0'+0;
}
}
Here, I have only taken a string of 8 characters. If you want you can add similar logic for 'a' to 'f' to give their equivalent hex values. Though, I haven't done that because I didn't need it.
Solution 10 - C
This is a function to directly convert hexadecimal containing char array to an integer which needs no extra library:
int hexadecimal2int(char *hdec) {
int finalval = 0;
while (*hdec) {
int onebyte = *hdec++;
if (onebyte >= '0' && onebyte <= '9'){onebyte = onebyte - '0';}
else if (onebyte >= 'a' && onebyte <='f') {onebyte = onebyte - 'a' + 10;}
else if (onebyte >= 'A' && onebyte <='F') {onebyte = onebyte - 'A' + 10;}
finalval = (finalval << 4) | (onebyte & 0xF);
}
finalval = finalval - 524288;
return finalval;
}
Solution 11 - C
I made a librairy to make Hexadecimal / Decimal conversion without the use of stdio.h. Very simple to use :
unsigned hexdec (const char *hex, const int s_hex);
Before the first conversion intialize the array used for conversion with :
void init_hexdec ();
Here the link on github : https://github.com/kevmuret/libhex/
Solution 12 - C
I like @radhoo solution, very efficient on small systems. One can modify the solution for converting the hex to int32_t (hence, signed value).
/**
* hex2int
* take a hex string and convert it to a 32bit number (max 8 hex digits)
*/
int32_t hex2int(char *hex) {
uint32_t val = *hex > 56 ? 0xFFFFFFFF : 0;
while (*hex) {
// get current character then increment
uint8_t byte = *hex++;
// transform hex character to the 4bit equivalent number, using the ascii table indexes
if (byte >= '0' && byte <= '9') byte = byte - '0';
else if (byte >= 'a' && byte <='f') byte = byte - 'a' + 10;
else if (byte >= 'A' && byte <='F') byte = byte - 'A' + 10;
// shift 4 to make space for new digit, and add the 4 bits of the new digit
val = (val << 4) | (byte & 0xF);
}
return val;
}
Note the return value is int32_t while val is still uint32_t to not overflow.
The
uint32_t val = *hex > 56 ? 0xFFFFFFFF : 0;
is not protected against malformed string.
Solution 13 - C
Here is a solution building upon "sairam singh"s solution. Where that answer is a one to one solution, this one combines two ASCII nibbles into one byte.
// Assumes input is null terminated string.
//
// IN OUT
// -------------------- --------------------
// Offset Hex ASCII Offset Hex
// 0 0x31 1 0 0x13
// 1 0x33 3
// 2 0x61 A 1 0xA0
// 3 0x30 0
// 4 0x00 NULL 2 NULL
int convert_ascii_hex_to_hex2(char *szBufOut, char *szBufIn) {
int i = 0; // input buffer index
int j = 0; // output buffer index
char a_byte;
// Two hex digits are combined into one byte
while (0 != szBufIn[i]) {
// zero result
szBufOut[j] = 0;
// First hex digit
if ((szBufIn[i]>='A') && (szBufIn[i]<='F')) {
a_byte = (unsigned int) szBufIn[i]-'A'+10;
} else if ((szBufIn[i]>='a') && (szBufIn[i]<='f')) {
a_byte = (unsigned int) szBufIn[i]-'a'+10;
} else if ((szBufIn[i]>='0') && (szBufIn[i]<='9')) {
a_byte = (unsigned int) szBufIn[i]-'0';
} else {
return -1; // error with first digit
}
szBufOut[j] = a_byte << 4;
// second hex digit
i++;
if ((szBufIn[i]>='A') && (szBufIn[i]<='F')) {
a_byte = (unsigned int) szBufIn[i]-'A'+10;
} else if ((szBufIn[i]>='a') && (szBufIn[i]<='f')) {
a_byte = (unsigned int) szBufIn[i]-'a'+10;
} else if ((szBufIn[i]>='0') && (szBufIn[i]<='9')) {
a_byte = (unsigned int) szBufIn[i]-'0';
} else {
return -2; // error with second digit
}
szBufOut[j] |= a_byte;
i++;
j++;
}
szBufOut[j] = 0;
return 0; // normal exit
}
Solution 14 - C
I know this is really old but I think the solutions looked too complicated. Try this in VB:
Public Function HexToInt(sHEX as String) as long
Dim iLen as Integer
Dim i as Integer
Dim SumValue as Long
Dim iVal as long
Dim AscVal as long
iLen = Len(sHEX)
For i = 1 to Len(sHEX)
AscVal = Asc(UCase(Mid$(sHEX, i, 1)))
If AscVal >= 48 And AscVal <= 57 Then
iVal = AscVal - 48
ElseIf AscVal >= 65 And AscVal <= 70 Then
iVal = AscVal - 55
End If
SumValue = SumValue + iVal * 16 ^ (iLen- i)
Next i
HexToInt = SumValue
End Function