Apply style ONLY on IE

CssInternet Explorer

Css Problem Overview

Here is my block of CSS:

.actual-form table {
  padding: 5px 0 15px 15px;
  margin: 0 0 30px 0;
  display: block;
  width: 100%;
  background: #f9f9f9;
  border-top: 1px solid #d0d0d0;
  border-bottom: 1px solid #d0d0d0;
}

I only want IE 7, 8, and 9 to "see" width: 100%

What is the simplest way to accomplish this?

Css Solutions

Solution 1 - Css

@media screen and (-ms-high-contrast: active), (-ms-high-contrast: none) {
   #myElement {
        /* Enter your style code */
   }
}

Explanation: It is a Microsoft-specific media query. Using -ms-high-contrast property specific to Microsoft IE, it will only be parsed in Internet Explorer 10 or greater. I have used both the valid values of the media query, so it will be parsed by IE only, whether the user has high contrast enabled or not.

Solution 2 - Css

Update 2017

Depending on the environment, conditional comments have been officially deprecated and removed in IE10+.

Original

The simplest way is probably to use an Internet Explorer conditional comment in your HTML:

<!--[if IE]>
<style>
    .actual-form table {
         width: 100%;
    }
</style>
<![endif]-->

There are numerous hacks (e.g. the underscore hack) you can use that will allow you to target only IE within your stylesheet, but it gets very messy if you want to target all versions of IE on all platforms.

Solution 3 - Css

Apart from the IE conditional comments, this is an updated list on how to target IE6 to IE10.

See specific CSS & JS hacks beyond IE.

/***** Attribute Hacks ******/

/* IE6 */
#once { _color: blue }

/* IE6, IE7 */
#doce { *color: blue; /* or #color: blue */ }

/* Everything but IE6 */
#diecisiete { color/**/: blue }

/* IE6, IE7, IE8, but also IE9 in some cases :( */
#diecinueve { color: blue\9; }

/* IE7, IE8 */
#veinte { color/*\**/: blue\9; }

/* IE6, IE7 -- acts as an !important */
#veintesiete { color: blue !ie; } /* string after ! can be anything */

/* IE8, IE9 */
#anotherone  {color: blue\0/;} /* must go at the END of all rules */

/* IE9, IE10, IE11 */
@media screen and (min-width:0\0) {
    #veintidos { color: red}
}


/***** Selector Hacks ******/

/* IE6 and below */
* html #uno  { color: red }

/* IE7 */
*:first-child+html #dos { color: red }

/* IE8 (Everything but IE 6,7) */
html>/**/body #cuatro { color: red }

/* Everything but IE6-8 */
:root *> #quince { color: red  }

/* IE7 */
*+html #dieciocho {  color: red }

/* IE 10+ */
@media screen and (-ms-high-contrast: active), (-ms-high-contrast: none) {
   #veintiun { color: red; }
}

Solution 4 - Css

There are severals hacks available for IE

Using conditional comments with stylesheet

<!--[if IE]>
<link rel="stylesheet" type="text/css" href="only-ie.css" />
<![endif]-->

Using conditional comments with head section css

<!--[if IE]>
<style type="text/css">
	/************ css for all IE browsers ****************/
</style>
<![endif]-->

Using conditional comments with HTML elements

<!--[if IE]> <div class="ie-only"> /*content*/ </div> <![endif]-->

Using media query

 IE10+
 @media screen and (-ms-high-contrast: active), (-ms-high-contrast: none) {
 selector { property:value; }
 }

 IE6,7,9,10
 @media screen and (min-width: 640px), screen\9 {
 selector { property:value; }
 }

 IE6,7
 @media screen\9 {
  selector { property:value; }
 }

 IE8
 @media \0screen {
  selector { property:value; }
 }

 IE6,7,8
 @media \0screen\,screen\9 {
  selector { property:value; }
 }

 IE9,10
 @media screen and (min-width:0\0){
  selector { property:value; }
 }

Solution 5 - Css

As well as a conditional comment could also use CSS Browser Selector http://rafael.adm.br/css_browser_selector/ as this will allow you to target specific browsers. You can then set your CSS as

.ie .actual-form table {
    width: 100%
    }

This will also allow you to target specific browsers within your main stylesheet without the need for conditional comments.

Solution 6 - Css

I think for best practice you should write IE conditional statement inside the <head> tag that inside has a link to your special ie style sheet. This HAS TO BE after your custom css link so it overrides the latter, I have a small site so i use the same ie css for all pages.

<link rel="stylesheet" type="text/css" href="index.css" />
<!--[if IE]>
	<link rel="stylesheet" type="text/css" href="all-ie-only.css" />
<![endif]-->

this differs from james answer as i think(personal opinion because i work with a designer team and i dont want them to touch my html files and mess up something there) you should never include styles in your html file.

Solution 7 - Css

A bit late on this one but this worked perfectly for me when trying to hide the background for IE6 & 7

.myclass{ 
    background-image: url("images/myimg.png");
    background-position: right top;
    background-repeat: no-repeat;
    background-size: 22px auto;
    padding-left: 48px;
    height: 42px;
    _background-image: none;
    *background-image: none;
}

I got this hack via: http://briancray.com/posts/target-ie6-and-ie7-with-only-1-extra-character-in-your-css/

#myelement
{
    color: #999; /* shows in all browsers */
    *color: #999; /* notice the * before the property - shows in IE7 and below */
    _color: #999; /* notice the _ before the property - shows in IE6 and below */
}

Solution 8 - Css

Welcome BrowserDetect - an awesome function.

<script>
    var BrowserDetect;
    BrowserDetect = {...};//  get BrowserDetect Object from the link referenced in this answer
    BrowserDetect.init();
    // On page load, detect browser (with jQuery or vanilla)
    if (BrowserDetect.browser === 'Explorer') {
      // Add 'ie' class on every element on the page.
      $('*').addClass('ie');
    }
</script>

<!-- ENSURE IE STYLES ARE AVAILABLE -->
<style>
    div.ie {
       // do something special for div on IE browser.
    }
    h1.ie {
     // do something special for h1 on IE browser.
    }
</style>

The Object BrowserDetect also provides version info so we can add specific classes - for ex. $('*').addClass('ie9'); if (BrowserDetect.version == 9).

Good Luck....

Solution 9 - Css

> For IE9+

@media screen and (min-width:0\0) and (min-resolution: +72dpi) {
   // IE9+ CSS
   .selector{
      color: red;
   }
}

> IE Edge 12+

@supports (-ms-ime-align: auto) {
  .selector {
    color: red;
  }
}

> This one works on Edge and all IEs

:-ms-lang(x), .selector { color: red; }

Solution 10 - Css

It really depends on the IE versions ... I found this excellent resource that is up to date from IE6-10:

> CSS hack for Internet Explorer 6 > > It is called the Star HTML Hack and looks as follows: > > * html .color {color: #F00;} > This hack uses fully valid CSS. > > CSS hack for Internet Explorer 7 > > It is called the Star Plus Hack. > > *:first-child+html .color {color: #F00;} > Or a shorter version: > > *+html .color {color: #F00;} > Like the star HTML hack, this uses valid CSS. > > CSS hack for Internet Explorer 8 > > @media \0screen { > .color {color: #F00;} > } > This hacks does not use valid CSS. > > CSS hack for Internet Explorer 9 > > :root .color {color: #F00\9;} > This hacks also does not use valid CSS. > > Added 2013.02.04: Unfortunately IE10 understands this hack. > > CSS hack for Internet Explorer 10 > > @media screen and (-ms-high-contrast: active), (-ms-high-contrast: none) { > .color {color: #F00;} > } > This hacks also does not use valid CSS.

Solution 11 - Css

Here is a COMPLETE Javascript-free, CSS-based solution that allows you to target Internet Explorer 1-11! My solution below works by hiding IE1-7 from all your modern sheets using @import, giving IE1-7 a clean, white page layout, then uses three simple CSS media query "hacks" to isolate IE8-11 in the imported sheet. It even affects IE on Mac. And no IE conditional comments are needed.

With this solution you will never have to customize your web applications for Internet Explorer ever again, and can safely move forward using cutting edge CSS in all your websites. Best of all it requires NO JavaScript to work!!

HOW IT WORKS

First create three CSS style sheets:

  1. "OldBrowsers.css"
  2. "ModernBrowsers.css"
  3. "Import.css".

The first style sheet, "OldBrowsers", is a basic element "reset" style sheet that gives all browsers, old and new, a simple white, block-level layout and where you can style all the elements for every web browser ever made. This allows 20+ years of web browsers and their elements to all use the same HTML designs and look alike. This sheet is also seen by IE1-11. Add in this sheet all basic styles needed to style the elements only. The second sheet, "ModernBrowsers.css", is where you can safely put all your modern, cutting-edge CSS that styles both the elements with HTML5 modern designs, but control layouts, etc. IE1-7 will NOT see this sheet. The third sheet is an import sheet, "Import.css", that will load the second sheet mentioned above and all your advanced CSS style sheets using a single @import rule. This hides your modern style sheet from wide range of older browsers, including IE1-7. IE1-11 will see the "Import.css" sheet, but IE1-7 will not see "ModernBrowsers.css" sheet because of the @import rule.

<link media="screen" rel="stylesheet" type="text/css" href="OldBrowsers.css" />
<link media="screen" rel="stylesheet" type="text/css" href="Import.css" />

In your "Import.css" sheet add this @import rule exactly as formatted below. This "ModernBrowsers.css" sheet will be hidden from IE1-7 and a wide range of older browsers listed below:

@import 'ModernBrowsers.css' all;

All CSS in this imported sheet will be hidden from Internet Explorer 1-7 and a wide range of older browsers. IE1-7, and a wide range or older browsers, do not understand media type "all", nor the specific @import format shown above, so will fail to import this sheet. This specific version of import is not recognized by many older browsers (pre-2001). Those browsers are so old now, you just need to deliver them a clean white web page with stacked blocks of content.

The CSS you add to "OldBrowsers" allows you to set up old browsers and IE1-7 to use plain styling you control. I personally add only HTML "reset" element styling in this sheet and make sure all the HTML5 elements have simple clean designs. Newer browsers will cascade over these in the "ModernBrowsers.css" style sheet.

In "ModernBrowsers.css" you want to add all your modern styles, but also have special CSS hacks to target Internet Explorer 8-11 using CSS media queries (alongside all your normal selectors and classes). Simply add the following IE-only fixes to your modern style sheet to target these last specific IE browsers. Drop into these blocks any styles specific to these old IE browsers.

Note: Keep in mind HTML5 and most of CSS3 is generally supported starting with Internet Explorer 9 through 11. But there are bugs, missing element support, and other issues with IE8-11 and even the Trident Edge browsers miss. But you now can safely target these older IE 8-11 browsers this way, while using your cutting-edge CSS inside this sheet for all other modern browsers going forward:

/* IE8 */
@media \0screen {
	body {
		background: red !important;
	}
}

/* IE9 */
@media all and (min-width:0\0) and (min-resolution:.001dpcm) {
	body {
		background: blue !important;
	}
}

/* IE10-11 */
@media all and (-ms-high-contrast: none), (-ms-high-contrast: active) {
	body {
		background: green !important;
	}
}

Simple! You have now targeted styles for IE1-11 (all Internet Explorer browsers!)

With this solution you achieve the following:

  1. The @import excludes IE 1-7 from your modern styles, completely! Those agents, along with the list below, will never see your modern imported styles and get a clean white style sheet content page older browsers can still use as far as viewing your content (use "OldBrowsers.css" to style them). The following browsers are excluded from "ModernBrowsers.css" using the above @import rule:

    • Windows Internet Explorer 1-7.x
    • Macintosh Internet Explorer 1-5.x
    • Netscape 1-4.8
    • Opera 1-3.5
    • Konqueror 1-2.1
    • Windows Amaya 1-5.1
    • iCab 1-2
    • OmniWeb

  2. In your "ModernBrowsers" imported sheet, you can now safely target IE browsers version 8-11 using simple media query "hacks".

  3. This system uses a simple @import style sheet system that is fast and manageable using traditional, non-support for external style rules rather than CSS fixes sprinkled throughout multiple sheets. (BTW...Do not listen to anyone saying @import is slow, as it is not. My import sheet has ONE LINE and is maybe a kilobyte or less in size! @import has been used since the birth of the WWW and is no different than a simple CSS link. Compare this to the Megabytes of Javascript kids today are shoving into browsers using these new "modern" ECMAScript SPA API's just to display a tiny paragraph of news!) One @import line now separates years and years of IE browser version from your newer CSS code and fancy layout designs. No scripting needed!

  4. All old IE browsers and a wide range of other user agents are excluded from modern styles now using this import strategy, which allows these older browsers to collapse back to plain, "block-level", white pages and stacked content layouts that are fully accessible by older browsers. You can now spend MINIMAL time customizing your content for old browsers and instead let them see plain white stacked content pages for thousands of pages in your website!

  5. Notice this solution has no IE conditional comments! You should NEVER use those since IE 10-11 no longer support IE conditionals.

  6. With this solution, your modern web designs are now 100% free to use custom, cutting-edge CSS3 technologies without having to ever worry about older browsers and IE1-11 ever again!

  7. Linked CSS has very wide support, even in older CSS1 browsers going back to 1995. It is just one more reason to NOT USE EMBEDDED or "style" element styles. Use these linked CSS designs, instead.

  8. If you added a really good set of "reset" or element styles into the "OldBrowsers" style sheet, 20+ years of old and new browsers and their basic element designs will allow your core web page design to look the same using that one sheet. The idea with "reset" element CSS is to force all browsers through history, and their shared HTML element support, to look the same BEFORE you apply CSS layouts, scripting, and fancier CSS designs. The HTML basic elements have change very little in the past 25 years. So styling elements first to simplify text content display makes sense.

This is part of the new "progressive" CSS, 100% JavaScript-free, design concept in 2021 for addressing cross-browser style issues, where older agents are allowed to degrade gracefully to simpler layouts rather than struggling to fix problems in cryptic old, broken, box-model agents (IE5-6) in a piecemeal fashion to match complex CSS layouts. Most older web browsers do NOT need to recreate your custom layouts any longer. They just need to display basic text and media content. With the long tail of their slow demise online, IE 1-11 just need simple layout designs so the content is readable and accessible.

The advantage to this strategy is its 100% Javascript-free! You should NOT be using scripting to manage CSS in web browsers in 2021, anyway. I recommend you dump Modernizr and all "polyfills" and try my clean CSS solution instead when managing Internet Explorer in web browsers. My solution is effective in targeting IE1-11, giving you complete control over how you customize CSS for those targeted browsers, while freeing you up as a designer to focus on newer CSS3 and cutting-edge styles and layouts in Edge and all other modern HTML5 browsers going forward. I have been using a version of this since 2004, but recently updated it for 2021.

It's my hope we stop creating these gigantic, multi-megabyte, CPU-hog, JavaScripted, polyfill nightmare scripted solutions for addressing what used to be solved years ago with a few lines of simple Cascading Style Sheet code. :)

Solution 12 - Css

For /* Internet Explorer 9+ (one-liner) */

_::selection, .selector { property:value\0; }

Only this solution perfectly work for me.

Solution 13 - Css

<!--[if !IE]><body<![endif]-->
<!--[if IE]><body class="ie"> <![endif]-->

body.ie .actual-form table {
    width: 100%
}
Categories
Recommended Css Solutions
Recommended Internet Explorer Solutions

Previous Solution:

How to POST JSON Data With PHP cURL?

PhpJsonRestCurl

Next Solution:

How do I get the type of a variable?

C++VariablesTypeof

Attributions

All content for this solution is sourced from the original question on Stackoverflow.

The content on this page is licensed under the Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.

Content TypeOriginal AuthorOriginal Content on Stackoverflow
QuestionFastTrackView Question on Stackoverflow
Solution 1 - CssHimanshu DwivediView Answer on Stackoverflow
Solution 2 - CssJames AllardiceView Answer on Stackoverflow
Solution 3 - CssOriolView Answer on Stackoverflow
Solution 4 - CssSantosh KhalseView Answer on Stackoverflow
Solution 5 - CssfrontendzzzguyView Answer on Stackoverflow
Solution 6 - Csselad silverView Answer on Stackoverflow
Solution 7 - CssosouthgateView Answer on Stackoverflow
Solution 8 - CssAakashView Answer on Stackoverflow
Solution 9 - CssSrinivasan NView Answer on Stackoverflow
Solution 10 - CssPyklerView Answer on Stackoverflow
Solution 11 - CssStokelyView Answer on Stackoverflow
Solution 12 - CssRahi.ShahView Answer on Stackoverflow
Solution 13 - Cssdxc111View Answer on Stackoverflow