Why doesn't GCC optimize a*a*a*a*a*a to (a*a*a)*(a*a*a)?

GccAssemblyFloating PointCompiler OptimizationFast Math

Gcc Problem Overview


I am doing some numerical optimization on a scientific application. One thing I noticed is that GCC will optimize the call pow(a,2) by compiling it into a*a, but the call pow(a,6) is not optimized and will actually call the library function pow, which greatly slows down the performance. (In contrast, Intel C++ Compiler, executable icc, will eliminate the library call for pow(a,6).)

What I am curious about is that when I replaced pow(a,6) with a*a*a*a*a*a using GCC 4.5.1 and options "-O3 -lm -funroll-loops -msse4", it uses 5 mulsd instructions:

movapd  %xmm14, %xmm13
mulsd   %xmm14, %xmm13
mulsd   %xmm14, %xmm13
mulsd   %xmm14, %xmm13
mulsd   %xmm14, %xmm13
mulsd   %xmm14, %xmm13

while if I write (a*a*a)*(a*a*a), it will produce

movapd  %xmm14, %xmm13
mulsd   %xmm14, %xmm13
mulsd   %xmm14, %xmm13
mulsd   %xmm13, %xmm13

which reduces the number of multiply instructions to 3. icc has similar behavior.

Why do compilers not recognize this optimization trick?

Gcc Solutions


Solution 1 - Gcc

Because Floating Point Math is not Associative. The way you group the operands in floating point multiplication has an effect on the numerical accuracy of the answer.

As a result, most compilers are very conservative about reordering floating point calculations unless they can be sure that the answer will stay the same, or unless you tell them you don't care about numerical accuracy. For example: the -fassociative-math option of gcc which allows gcc to reassociate floating point operations, or even the -ffast-math option which allows even more aggressive tradeoffs of accuracy against speed.

Solution 2 - Gcc

Lambdageek correctly points out that because associativity does not hold for floating-point numbers, the "optimization" of a*a*a*a*a*a to (a*a*a)*(a*a*a) may change the value. This is why it is disallowed by C99 (unless specifically allowed by the user, via compiler flag or pragma). Generally, the assumption is that the programmer wrote what she did for a reason, and the compiler should respect that. If you want (a*a*a)*(a*a*a), write that.

That can be a pain to write, though; why can't the compiler just do [what you consider to be] the right thing when you use pow(a,6)? Because it would be the wrong thing to do. On a platform with a good math library, pow(a,6) is significantly more accurate than either a*a*a*a*a*a or (a*a*a)*(a*a*a). Just to provide some data, I ran a small experiment on my Mac Pro, measuring the worst error in evaluating a^6 for all single-precision floating numbers between [1,2):

worst relative error using    powf(a, 6.f): 5.96e-08
worst relative error using (a*a*a)*(a*a*a): 2.94e-07
worst relative error using     a*a*a*a*a*a: 2.58e-07

Using pow instead of a multiplication tree reduces the error bound by a factor of 4. Compilers should not (and generally do not) make "optimizations" that increase error unless licensed to do so by the user (e.g. via -ffast-math).

Note that GCC provides __builtin_powi(x,n) as an alternative to pow( ), which should generate an inline multiplication tree. Use that if you want to trade off accuracy for performance, but do not want to enable fast-math.

Solution 3 - Gcc

Another similar case: most compilers won't optimize a + b + c + d to (a + b) + (c + d) (this is an optimization since the second expression can be pipelined better) and evaluate it as given (i.e. as (((a + b) + c) + d)). This too is because of corner cases:

float a = 1e35, b = 1e-5, c = -1e35, d = 1e-5;
printf("%e %e\n", a + b + c + d, (a + b) + (c + d));

This outputs 1.000000e-05 0.000000e+00

Solution 4 - Gcc

Fortran (designed for scientific computing) has a built-in power operator, and as far as I know Fortran compilers will commonly optimize raising to integer powers in a similar fashion to what you describe. C/C++ unfortunately don't have a power operator, only the library function pow(). This doesn't prevent smart compilers from treating pow specially and computing it in a faster way for special cases, but it seems they do it less commonly ...

Some years ago I was trying to make it more convenient to calculate integer powers in an optimal way, and came up with the following. It's C++, not C though, and still depends on the compiler being somewhat smart about how to optimize/inline things. Anyway, hope you might find it useful in practice:

template<unsigned N> struct power_impl;

template<unsigned N> struct power_impl {
	template<typename T>
	static T calc(const T &x) {
		if (N%2 == 0)
			return power_impl<N/2>::calc(x*x);
		else if (N%3 == 0)
			return power_impl<N/3>::calc(x*x*x);
		return power_impl<N-1>::calc(x)*x;
	}
};

template<> struct power_impl<0> {
	template<typename T>
	static T calc(const T &) { return 1; }
};

template<unsigned N, typename T>
inline T power(const T &x) {
	return power_impl<N>::calc(x);
}

Clarification for the curious: this does not find the optimal way to compute powers, but since finding the optimal solution is an NP-complete problem and this is only worth doing for small powers anyway (as opposed to using pow), there's no reason to fuss with the detail.

Then just use it as power<6>(a).

This makes it easy to type powers (no need to spell out 6 as with parens), and lets you have this kind of optimization without -ffast-math in case you have something precision dependent such as compensated summation (an example where the order of operations is essential).

You can probably also forget that this is C++ and just use it in the C program (if it compiles with a C++ compiler).

Hope this can be useful.

EDIT:

This is what I get from my compiler:

For a*a*a*a*a*a,

    movapd  %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm1, %xmm0

For (a*a*a)*(a*a*a),

    movapd  %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm1, %xmm0
    mulsd   %xmm0, %xmm0

For power<6>(a),

    mulsd   %xmm0, %xmm0
    movapd  %xmm0, %xmm1
    mulsd   %xmm0, %xmm1
    mulsd   %xmm0, %xmm1

Solution 5 - Gcc

GCC does actually optimize a*a*a*a*a*a to (a*a*a)*(a*a*a) when a is an integer. I tried with this command:

$ echo 'int f(int x) { return x*x*x*x*x*x; }' | gcc -o - -O2 -S -masm=intel -x c -

There are a lot of gcc flags but nothing fancy. They mean: Read from stdin; use O2 optimization level; output assembly language listing instead of a binary; the listing should use Intel assembly language syntax; the input is in C language (usually language is inferred from input file extension, but there is no file extension when reading from stdin); and write to stdout.

Here's the important part of the output. I've annotated it with some comments indicating what's going on in the assembly language:

; x is in edi to begin with.  eax will be used as a temporary register.
mov  eax, edi  ; temp = x
imul eax, edi  ; temp = x * temp
imul eax, edi  ; temp = x * temp
imul eax, eax  ; temp = temp * temp

I'm using system GCC on Linux Mint 16 Petra, an Ubuntu derivative. Here's the gcc version:

$ gcc --version
gcc (Ubuntu/Linaro 4.8.1-10ubuntu9) 4.8.1

As other posters have noted, this option is not possible in floating point, because floating point arithmetic is not associative.

Solution 6 - Gcc

Because a 32-bit floating-point number - such as 1.024 - is not 1.024. In a computer, 1.024 is an interval: from (1.024-e) to (1.024+e), where "e" represents an error. Some people fail to realize this and also believe that * in aa stands for multiplication of arbitrary-precision numbers without there being any errors attached to those numbers. The reason why some people fail to realize this is perhaps the math computations they exercised in elementary schools: working only with ideal numbers without errors attached, and believing that it is OK to simply ignore "e" while performing multiplication. They do not see the "e" implicit in "float a=1.2", "aa*a" and similar C codes.

Should majority of programmers recognize (and be able to execute on) the idea that C expression aaaaaa is not actually working with ideal numbers, the GCC compiler would then be FREE to optimize "aaaaaa" into say "t=(aa); tt*t" which requires a smaller number of multiplications. But unfortunately, the GCC compiler does not know whether the programmer writing the code thinks that "a" is a number with or without an error. And so GCC will only do what the source code looks like - because that is what GCC sees with its "naked eye".

... once you know what kind of programmer you are, you can use the "-ffast-math" switch to tell GCC that "Hey, GCC, I know what I am doing!". This will allow GCC to convert aaaaaa into a different piece of text - it looks different from aaaaaa - but still computes a number within the error interval of aaaaa*a. This is OK, since you already know you are working with intervals, not ideal numbers.

Solution 7 - Gcc

No posters have mentioned the contraction of floating expressions yet (ISO C standard, 6.5p8 and 7.12.2). If the FP_CONTRACT pragma is set to ON, the compiler is allowed to regard an expression such as a*a*a*a*a*a as a single operation, as if evaluated exactly with a single rounding. For instance, a compiler may replace it by an internal power function that is both faster and more accurate. This is particularly interesting as the behavior is partly controlled by the programmer directly in the source code, while compiler options provided by the end user may sometimes be used incorrectly.

The default state of the FP_CONTRACT pragma is implementation-defined, so that a compiler is allowed to do such optimizations by default. Thus portable code that needs to strictly follow the IEEE 754 rules should explicitly set it to OFF.

If a compiler doesn't support this pragma, it must be conservative by avoiding any such optimization, in case the developer has chosen to set it to OFF.

GCC doesn't support this pragma, but with the default options, it assumes it to be ON; thus for targets with a hardware FMA, if one wants to prevent the transformation a*b+c to fma(a,b,c), one needs to provide an option such as -ffp-contract=off (to explicitly set the pragma to OFF) or -std=c99 (to tell GCC to conform to some C standard version, here C99, thus follow the above paragraph). In the past, the latter option was not preventing the transformation, meaning that GCC was not conforming on this point: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=37845

Solution 8 - Gcc

Library functions like "pow" are usually carefully crafted to yield the minimum possible error (in generic case). This is usually achieved approximating functions with splines (according to Pascal's comment the most common implementation seems to be using https://en.wikipedia.org/wiki/Remez_algorithm">Remez algorithm)

fundamentally the following operation:

pow(x,y);

has a inherent error of approximately the same magnitude as the error in any single multiplication or division.

While the following operation:

float a=someValue;
float b=a*a*a*a*a*a;

has a inherent error that is greater more than 5 times the error of a single multiplication or division (because you are combining 5 multiplications).

The compiler should be really carefull to the kind of optimization it is doing:

  1. if optimizing pow(a,6) to a*a*a*a*a*a it may improve performance, but drastically reduce the accuracy for floating point numbers.
  2. if optimizing a*a*a*a*a*a to pow(a,6) it may actually reduce the accuracy because "a" was some special value that allows multiplication without error (a power of 2 or some small integer number)
  3. if optimizing pow(a,6) to (a*a*a)*(a*a*a) or (a*a)*(a*a)*(a*a) there still can be a loss of accuracy compared to pow function.

In general you know that for arbitrary floating point values "pow" has better accuracy than any function you could eventually write, but in some special cases multiple multiplications may have better accuracy and performance, it is up to the developer choosing what is more appropriate, eventually commenting the code so that noone else would "optimize" that code.

The only thing that make sense (personal opinion, and apparently a choice in GCC wichout any particular optimization or compiler flag) to optimize should be replacing "pow(a,2)" with "a*a". That would be the only sane thing a compiler vendor should do.

Solution 9 - Gcc

As Lambdageek pointed out float multiplication is not associative and you can get less accuracy, but also when get better accuracy you can argue against optimisation, because you want a deterministic application. For example in game simulation client/server, where every client has to simulate the same world you want floating point calculations to be deterministic.

Solution 10 - Gcc

I would not have expected this case to be optimized at all. It can't be very often where an expression contains subexpressions that can be regrouped to remove entire operations. I would expect compiler writers to invest their time in areas which would be more likely to result in noticeable improvements, rather than covering a rarely encountered edge case.

I was surprised to learn from the other answers that this expression could indeed be optimized with the proper compiler switches. Either the optimization is trivial, or it is an edge case of a much more common optimization, or the compiler writers were extremely thorough.

There's nothing wrong with providing hints to the compiler as you've done here. It's a normal and expected part of the micro-optimization process to rearrange statements and expressions to see what differences they will bring.

While the compiler may be justified in considering the two expressions to deliver inconsistent results (without the proper switches), there's no need for you to be bound by that restriction. The difference will be incredibly tiny - so much so that if the difference matters to you, you should not be using standard floating point arithmetic in the first place.

Solution 11 - Gcc

There are already a few good answers to this question, but for the sake of completeness I wanted to point out that the applicable section of the C standard is 5.1.2.2.3/15 (which is the same as section 1.9/9 in the C++11 standard). This section states that operators can only be regrouped if they are really associative or commutative.

Solution 12 - Gcc

gcc actually can do this optimization, even for floating-point numbers. For example,

double foo(double a) {
  return a*a*a*a*a*a;
}

becomes

foo(double):
    mulsd   %xmm0, %xmm0
    movapd  %xmm0, %xmm1
    mulsd   %xmm0, %xmm1
    mulsd   %xmm1, %xmm0
    ret

with -O -funsafe-math-optimizations. This reordering violates IEEE-754, though, so it requires the flag.

Signed integers, as Peter Cordes pointed out in a comment, can do this optimization without -funsafe-math-optimizations since it holds exactly when there is no overflow and if there is overflow you get undefined behavior. So you get

foo(long):
    movq    %rdi, %rax
    imulq   %rdi, %rax
    imulq   %rdi, %rax
    imulq   %rax, %rax
    ret

with just -O. For unsigned integers, it's even easier since they work mod powers of 2 and so can be reordered freely even in the face of overflow.

Attributions

All content for this solution is sourced from the original question on Stackoverflow.

The content on this page is licensed under the Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license.

Content TypeOriginal AuthorOriginal Content on Stackoverflow
QuestionxisView Question on Stackoverflow
Solution 1 - GccLambdageekView Answer on Stackoverflow
Solution 2 - GccStephen CanonView Answer on Stackoverflow
Solution 3 - GccsanjoydView Answer on Stackoverflow
Solution 4 - GccSzabolcsView Answer on Stackoverflow
Solution 5 - GccpicomancerView Answer on Stackoverflow
Solution 6 - Gccuser811773View Answer on Stackoverflow
Solution 7 - Gccvinc17View Answer on Stackoverflow
Solution 8 - GccCoffeDeveloperView Answer on Stackoverflow
Solution 9 - GccBjornView Answer on Stackoverflow
Solution 10 - GccMark RansomView Answer on Stackoverflow
Solution 11 - GccRastabanView Answer on Stackoverflow
Solution 12 - GccCharlesView Answer on Stackoverflow