Which Linux IPC technique to use?
LinuxIpcLinux Problem Overview
We are still in the design-phase of our project but we are thinking of having three separate processes on an embedded Linux kernel. One of the processes with be a communications module which handles all communications to and from the device through various mediums.
The other two processes will need to be able to send/receive messages through the communication process. I am trying to evaluate the IPC techniques that Linux provides; the message the other processes will be sending will vary in size, from debug logs to streaming media at ~5 Mbit rate. Also, the media could be streaming in and out simultaneously.
Which IPC technique would you suggestion for this application? http://en.wikipedia.org/wiki/Inter-process_communication
Processor is running around 400-500 Mhz if that changes anything. Does not need to be cross-platform, Linux only is fine. Implementation in C or C++ is required.
Linux Solutions
Solution 1 - Linux
When selecting your IPC you should consider causes for performance differences including transfer buffer sizes, data transfer mechanisms, memory allocation schemes, locking mechanism implementations, and even code complexity.
Of the available IPC mechanisms, the choice for performance often comes down to Unix domain sockets or named pipes (FIFOs). I read a paper on Performance Analysis of Various Mechanisms for Inter-process Communication that indicates Unix domain sockets for IPC may provide the best performance. I have seen conflicting results elsewhere which indicate pipes may be better.
When sending small amounts of data, I prefer named pipes (FIFOs) for their simplicity. This requires a pair of named pipes for bi-directional communication. Unix domain sockets take a bit more overhead to setup (socket creation, initialization and connection), but are more flexible and may offer better performance (higher throughput).
You may need to run some benchmarks for your specific application/environment to determine what will work best for you. From the description provided, it sounds like Unix domain sockets may be the best fit.
Beej's Guide to Unix IPC is good for getting started with Linux/Unix IPC.
Solution 2 - Linux
I would go for Unix Domain Sockets: less overhead than IP sockets (i.e. no inter-machine comms) but same convenience otherwise.
Solution 3 - Linux
Can't believe nobody has mentioned dbus.
http://www.freedesktop.org/wiki/Software/dbus
http://en.wikipedia.org/wiki/D-Bus
Might be a bit over the top if your application is architecturally simple, in which case - in a controlled embedded environment where performance is crucial - you can't beat shared memory.
Solution 4 - Linux
If performance really becomes a problem you can use shared memory - but it's a lot more complicated than the other methods - you'll need a signalling mechanism to signal that data is ready (semaphore etc) as well as locks to prevent concurrent access to structures while they're being modified.
The upside is that you can transfer a lot of data without having to copy it in memory, which will definitely improve performance in some cases.
Perhaps there are usable libraries which provide higher level primitives via shared memory.
Shared memory is generally obtained by mmaping the same file using MAP_SHARED (which can be on a tmpfs if you don't want it persisted); a lot of apps also use System V shared memory (IMHO for stupid historical reasons; it's a much less nice interface to the same thing)
Solution 5 - Linux
As of this writing (November 2014) Kdbus and Binder have left the staging branch of the linux kernel. There is no guarantee at this point that either will make it in, but the outlook is somewhat positive for both. Binder is a lightweight IPC mechanism in Android, Kdbus is a dbus-like IPC mechanism in the kernel which reduces context switch thus greatly speeding up messaging.
There is also "Transparent Inter-Process Communication" or TIPC, which is robust, useful for clustering and multi-node set ups; http://tipc.sourceforge.net/
Solution 6 - Linux
Unix domain sockets will address most of your IPC requirements. You don't really need a dedicated communication process in this case since kernel provides this IPC facility. Also, look at POSIX message queues which in my opinion is one of the most under-utilized IPC in Linux but comes very handy in many cases where n:1 communications are needed.