Swapping column values in MySQL
MysqlDatabaseMysql Problem Overview
I have a MySQL table with coordinates, the column names are X and Y. Now I want to swap the column values in this table, so that X becomes Y and Y becomes X. The most apparent solution would be renaming the columns, but I don't want to make structure changes since I don't necessarily have permissions to do that.
Is this possible to do with UPDATE in some way? UPDATE table SET X=Y, Y=X obviously won't do what I want.
Edit: Please note that my restriction on permissions, mentioned above, effectively prevents the use of ALTER TABLE or other commands that change the table/database structure. Renaming columns or adding new ones are unfortunately not options.
Mysql Solutions
Solution 1 - Mysql
I just had to deal with the same and I'll summarize my findings.
-
The
UPDATE table SET X=Y, Y=X
approach obviously doesn't work, as it'll just set both values to Y. -
Here's a method that uses a temporary variable. Thanks to Antony from the comments of http://beerpla.net/2009/02/17/swapping-column-values-in-mysql/ for the "IS NOT NULL" tweak. Without it, the query works unpredictably. See the table schema at the end of the post. This method doesn't swap the values if one of them is NULL. Use method #3 that doesn't have this limitation.
UPDATE swap_test SET x=y, y=@temp WHERE (@temp:=x) IS NOT NULL;
-
This method was offered by Dipin in, yet again, the comments of http://beerpla.net/2009/02/17/swapping-column-values-in-mysql/. I think it’s the most elegant and clean solution. It works with both NULL and non-NULL values.
UPDATE swap_test SET x=(@temp:=x), x = y, y = @temp;
-
Another approach I came up with that seems to work:
UPDATE swap_test s1, swap_test s2 SET s1.x=s1.y, s1.y=s2.x WHERE s1.id=s2.id;
Essentially, the 1st table is the one getting updated and the 2nd one is used to pull the old data from.
Note that this approach requires a primary key to be present.
This is my test schema:
CREATE TABLE `swap_test` (
`id` int(11) NOT NULL AUTO_INCREMENT,
`x` varchar(255) DEFAULT NULL,
`y` varchar(255) DEFAULT NULL,
PRIMARY KEY (`id`)
) ENGINE=InnoDB;
INSERT INTO `swap_test` VALUES ('1', 'a', '10');
INSERT INTO `swap_test` VALUES ('2', NULL, '20');
INSERT INTO `swap_test` VALUES ('3', 'c', NULL);
Solution 2 - Mysql
You could take the sum and subtract the opposing value using X and Y
UPDATE swaptest SET X=X+Y,Y=X-Y,X=X-Y;
Here is a sample test (and it works with negative numbers)
mysql> use test
Database changed
mysql> drop table if exists swaptest;
Query OK, 0 rows affected (0.03 sec)
mysql> create table swaptest (X int,Y int);
Query OK, 0 rows affected (0.12 sec)
mysql> INSERT INTO swaptest VALUES (1,2),(3,4),(-5,-8),(-13,27);
Query OK, 4 rows affected (0.08 sec)
Records: 4 Duplicates: 0 Warnings: 0
mysql> SELECT * FROM swaptest;
+------+------+
| X | Y |
+------+------+
| 1 | 2 |
| 3 | 4 |
| -5 | -8 |
| -13 | 27 |
+------+------+
4 rows in set (0.00 sec)
mysql>
Here is the swap being performed
mysql> UPDATE swaptest SET X=X+Y,Y=X-Y,X=X-Y;
Query OK, 4 rows affected (0.07 sec)
Rows matched: 4 Changed: 4 Warnings: 0
mysql> SELECT * FROM swaptest;
+------+------+
| X | Y |
+------+------+
| 2 | 1 |
| 4 | 3 |
| -8 | -5 |
| 27 | -13 |
+------+------+
4 rows in set (0.00 sec)
mysql>
Give it a Try !!!
Solution 3 - Mysql
The following code works for all scenarios in my quick testing:
UPDATE swap_test
SET x=(@temp:=x), x = y, y = @temp
Solution 4 - Mysql
UPDATE table SET X=Y, Y=X will do precisely what you want (edit: in PostgreSQL, not MySQL, see below). The values are taken from the old row and assigned to a new copy of the same row, then the old row is replaced. You do not have to resort to using a temporary table, a temporary column, or other swap tricks.
@D4V360: I see. That is shocking and unexpected. I use PostgreSQL and my answer works correctly there (I tried it). See the PostgreSQL UPDATE docs (under Parameters, expression), where it mentions that expressions on the right hand side of SET clauses explicitly use the old values of columns. I see that the corresponding MySQL UPDATE docs contain the statement "Single-table UPDATE assignments are generally evaluated from left to right" which implies the behaviour you describe.
Good to know.
Solution 5 - Mysql
Ok, so just for fun, you could do this! (assuming you're swapping string values)
mysql> select * from swapper;
+------+------+
| foo | bar |
+------+------+
| 6 | 1 |
| 5 | 2 |
| 4 | 3 |
+------+------+
3 rows in set (0.00 sec)
mysql> update swapper set
-> foo = concat(foo, "###", bar),
-> bar = replace(foo, concat("###", bar), ""),
-> foo = replace(foo, concat(bar, "###"), "");
Query OK, 3 rows affected (0.00 sec)
Rows matched: 3 Changed: 3 Warnings: 0
mysql> select * from swapper;
+------+------+
| foo | bar |
+------+------+
| 1 | 6 |
| 2 | 5 |
| 3 | 4 |
+------+------+
3 rows in set (0.00 sec)
A nice bit of fun abusing the left-to-right evaluation process in MySQL.
Alternatively, just use XOR if they're numbers. You mentioned coordinates, so do you have lovely integer values, or complex strings?
Edit: The XOR stuff works like this by the way:
update swapper set foo = foo ^ bar, bar = foo ^ bar, foo = foo ^ bar;
Solution 6 - Mysql
I believe have a intermediate exchange variable is the best practice in such way:
update z set c1 = @c := c1, c1 = c2, c2 = @c
First, it works always; second, it works regardless of data type.
Despite of Both
update z set c1 = c1 ^ c2, c2 = c1 ^ c2, c1 = c1 ^ c2
and
update z set c1 = c1 + c2, c2 = c1 - c2, c1 = c1 - c2
are working usually, only for number data type by the way, and it is your responsibility to prevent overflow, you can not use XOR between signed and unsigned, you also can not use sum for overflowing possibility.
And
update z set c1 = c2, c2 = @c where @c := c1
is not working if c1 is 0 or NULL or zero length string or just spaces.
We need change it to
update z set c1 = c2, c2 = @c where if((@c := c1), true, true)
Here is the scripts:
mysql> create table z (c1 int, c2 int)
-> ;
Query OK, 0 rows affected (0.02 sec)
mysql> insert into z values(0, 1), (-1, 1), (pow(2, 31) - 1, pow(2, 31) - 2)
-> ;
Query OK, 3 rows affected (0.00 sec)
Records: 3 Duplicates: 0 Warnings: 0
mysql> select * from z;
+------------+------------+
| c1 | c2 |
+------------+------------+
| 0 | 1 |
| -1 | 1 |
| 2147483647 | 2147483646 |
+------------+------------+
3 rows in set (0.02 sec)
mysql> update z set c1 = c1 ^ c2, c2 = c1 ^ c2, c1 = c1 ^ c2;
ERROR 1264 (22003): Out of range value for column 'c1' at row 2
mysql> update z set c1 = c1 + c2, c2 = c1 - c2, c1 = c1 - c2;
ERROR 1264 (22003): Out of range value for column 'c1' at row 3
mysql> select * from z;
+------------+------------+
| c1 | c2 |
+------------+------------+
| 0 | 1 |
| 1 | -1 |
| 2147483646 | 2147483647 |
+------------+------------+
3 rows in set (0.02 sec)
mysql> update z set c1 = c2, c2 = @c where @c := c1;
Query OK, 2 rows affected (0.00 sec)
Rows matched: 2 Changed: 2 Warnings: 0
mysql> select * from z;
+------------+------------+
| c1 | c2 |
+------------+------------+
| 0 | 1 |
| -1 | 1 |
| 2147483647 | 2147483646 |
+------------+------------+
3 rows in set (0.00 sec)
mysql> select * from z;
+------------+------------+
| c1 | c2 |
+------------+------------+
| 1 | 0 |
| 1 | -1 |
| 2147483646 | 2147483647 |
+------------+------------+
3 rows in set (0.00 sec)
mysql> update z set c1 = @c := c1, c1 = c2, c2 = @c;
Query OK, 3 rows affected (0.02 sec)
Rows matched: 3 Changed: 3 Warnings: 0
mysql> select * from z;
+------------+------------+
| c1 | c2 |
+------------+------------+
| 0 | 1 |
| -1 | 1 |
| 2147483647 | 2147483646 |
+------------+------------+
3 rows in set (0.00 sec)
mysql>update z set c1 = c2, c2 = @c where if((@c := c1), true, true);
Query OK, 3 rows affected (0.02 sec)
Rows matched: 3 Changed: 3 Warnings: 0
mysql> select * from z;
+------------+------------+
| c1 | c2 |
+------------+------------+
| 1 | 0 |
| 1 | -1 |
| 2147483646 | 2147483647 |
+------------+------------+
3 rows in set (0.00 sec)
Solution 7 - Mysql
Two alternatives
- Use a temporary table
- Investigate the XOR algorithm
Solution 8 - Mysql
ALTER TABLE table ADD COLUMN tmp;
UPDATE table SET tmp = X;
UPDATE table SET X = Y;
UPDATE table SET Y = tmp;
ALTER TABLE table DROP COLUMN tmp;
Something like this?
Edit: About Greg's comment: No, this doesn't work:
mysql> select * from test;
+------+------+
| x | y |
+------+------+
| 1 | 2 |
| 3 | 4 |
+------+------+
2 rows in set (0.00 sec)
mysql> update test set x=y, y=x;
Query OK, 2 rows affected (0.00 sec)
Rows matched: 2 Changed: 2 Warnings: 0
mysql> select * from test;
+------+------+
| x | y |
+------+------+
| 2 | 2 |
| 4 | 4 |
+------+------+
2 rows in set (0.00 sec)
mysql> select * from test;
+------+------+
| x | y |
+------+------+
| 2 | 2 |
| 4 | 4 |
+------+------+
2 rows in set (0.00 sec)
Solution 9 - Mysql
I've not tried it but
UPDATE tbl SET @temp=X, X=Y, Y=@temp
Might do it.
Mark
Solution 10 - Mysql
This surely works! I've just needed it to swap Euro and SKK price columns. :)
UPDATE tbl SET X=Y, Y=@temp where @temp:=X;
The above will not work (ERROR 1064 (42000): You have an error in your SQL syntax)
Solution 11 - Mysql
In SQL Server, you can use this query:
update swaptable
set col1 = t2.col2,
col2 = t2.col1
from swaptable t2
where id = t2.id
Solution 12 - Mysql
Assuming you have signed integers in your columns, you may need to use CAST(a ^ b AS SIGNED), since the result of the ^ operator is an unsigned 64-bit integer in MySQL.
In case it helps anyone, here's the method I used to swap the same column between two given rows:
SELECT BIT_XOR(foo) FROM table WHERE key = $1 OR key = $2
UPDATE table SET foo = CAST(foo ^ $3 AS SIGNED) WHERE key = $1 OR key = $2
where $1 and $2 are the keys of two rows and $3 is the result of the first query.
Solution 13 - Mysql
You could change column names, but this is more of a hack. But be cautious of any indexes that may be on these columns
Solution 14 - Mysql
Table name is customer. fields are a and b, swap a value to b;.
UPDATE customer SET a=(@temp:=a), a = b, b = @temp
I checked this is working fine.
Solution 15 - Mysql
You can apply below query, It worked perfect for me.
Table name: studentname
only single column available: name
update studentnames
set names = case names
when "Tanu" then "dipan"
when "dipan" then "Tanu"
end;
or
update studentnames
set names = case names
when "Tanu" then "dipan"
else "Tanu"
end;
Solution 16 - Mysql
As other answers point out, a simple swap won't work with MySQL because it caches the value of column 1 immediately before processing column 2, resulting in both columns being set to the value of column 2.
Given that the order of operations is not guaranteed in MySQL, using a temporary variable is also not reliable.
The only safe way to swap two columns without modifying the table structure is with an inner join, which requires a primary key (id
in this case).
UPDATE table1 t1, table2 t2
SET t1.column1 = t1.column2,
t1.column2 = t2.column1
WHERE s1.id = s2.id;
This will work without any issues.
Solution 17 - Mysql
Swapping of column values using single query
UPDATE my_table SET a=@tmp:=a, a=b, b=@tmp;
cheers...!
Solution 18 - Mysql
CREATE TABLE Names
(
F_NAME VARCHAR(22),
L_NAME VARCHAR(22)
);
INSERT INTO Names VALUES('Ashutosh', 'Singh'),('Anshuman','Singh'),('Manu', 'Singh');
UPDATE Names N1 , Names N2 SET N1.F_NAME = N2.L_NAME , N1.L_NAME = N2.F_NAME
WHERE N1.F_NAME = N2.F_NAME;
SELECT * FROM Names;
Solution 19 - Mysql
I had to just move value from one column to the other (like archiving) and reset the value of the original column.
The below (reference of #3 from accepted answer above) worked for me.
Update MyTable set X= (@temp:= X), X = 0, Y = @temp WHERE ID= 999;
Solution 20 - Mysql
This example swaps start_date and end_date for records where the dates are the wrong way round (when performing ETL into a major rewrite, I found some start dates later than their end dates. Down, bad programmers!).
In situ, I'm using MEDIUMINTs for performance reasons (like Julian days, but having a 0 root of 1900-01-01), so I was OK doing a condition of WHERE mdu.start_date > mdu.end_date.
The PKs were on all 3 columns individually (for operational / indexing reasons).
UPDATE monitor_date mdu
INNER JOIN monitor_date mdc
ON mdu.register_id = mdc.register_id
AND mdu.start_date = mdc.start_date
AND mdu.end_date = mdc.end_date
SET mdu.start_date = mdu.end_date, mdu.end_date = mdc.start_date
WHERE mdu.start_date > mdu.end_date;
Solution 21 - Mysql
Let's say you want to swap the value of first and last name in tb_user.
The safest would be:
- Copy tb_user. So you will have 2 tables: tb_user and tb_user_copy
- Use UPDATE INNER JOIN query
UPDATE tb_user a
INNER JOIN tb_user_copy b
ON a.id = b.id
SET a.first_name = b.last_name, a.last_name = b.first_name
Solution 22 - Mysql
if you want to swap all the columns where x is to y and y to x; use this query.
UPDATE table_name SET column_name = CASE column_name WHERE 'value of col is x' THEN 'swap it to y' ELSE 'swap it to x' END;
Solution 23 - Mysql
Let's imagine this table and let's try to swap the m and f from the 'sex' table:
id | name | sex | salary |
---|---|---|---|
1 | A | m | 2500 |
2 | B | f | 1500 |
3 | C | m | 5500 |
4 | D | f | 500 |
UPDATE sex
SET sex = CASE sex
WHEN 'm' THEN 'f'
ELSE 'm'
END;
So the updated table becomes:
id | name | sex | salary |
---|---|---|---|
1 | A | f | 2500 |
2 | B | m | 1500 |
3 | C | f | 5500 |
4 | D | m | 500 |