PHP Warning: Module already loaded in Unknown on line 0

On Mac OSX Mavericks using homebrew php55 whenever I run a a php command I get the following error message (everything runs fine it's just annoying)

PHP Warning:  Module 'intl' already loaded in Unknown on line 0

I ran

php --ini

and the output was

php --ini
PHP Warning:  Module 'intl' already loaded in Unknown on line 0

Warning: Module 'intl' already loaded in Unknown on line 0
Configuration File (php.ini) Path: /usr/local/etc/php/5.5
Loaded Configuration File:         /usr/local/etc/php/5.5/php.ini
Scan for additional .ini files in: /usr/local/etc/php/5.5/conf.d
Additional .ini files parsed:      /usr/local/etc/php/5.5/conf.d/ext-apcu.ini,
/usr/local/etc/php/5.5/conf.d/ext-igbinary.ini,
/usr/local/etc/php/5.5/conf.d/ext-intl.ini,
/usr/local/etc/php/5.5/conf.d/ext-memcached.ini,
/usr/local/etc/php/5.5/conf.d/ext-mongo.ini,
/usr/local/etc/php/5.5/conf.d/ext-uuid.ini,
/usr/local/etc/php/5.5/conf.d/ext-xdebug.ini

Checked in the php.ini file and the only place intl is loaded is at the top and it's commented out. The other files contents look something like:

extension="/usr/local/Cellar/php55/5.5.23/lib/php/extensions/no-debug-non-zts-20121212/intl.so"

where the contents after the last slash is the extension.

I'm not sure where else to look.

Any help is appreciated

I think you have loaded Xdebug probably twice in php.ini.

1. check the php.ini, that not have set xdebug.so for the values extension= and zend_extension=.

2. Check also /etc/php5/apache2 and /etc/php5/cli/. You should not load in each php.ini in these directories the extension xdebug.so. Only one file, php.ini should load it.

   Note: Inside the path is the string /etc/php5. The 5 is the version of PHP. So if you use another version, you always get a different path, like php7.

I had the same issue on mac i.e. Warning: Module 'pdo_pgsql' already loaded in Unknown on line 0. Here's how I solved it.

• Locate the folder conf.d, mine was in the directory /usr/local/etc/php/7.0/conf.d.
• In this folder, there's a file called ext-pdo_pgsql.ini.
• Type sudo nano ext-pdo_pgsql.ini to edit it.
• There should be a line extension="/usr/local/opt/php70-pdo-pgsql/pdo_pgsql.so". Comment it out by adding semi-colon to the beginning of the line i.e. ;extension="/usr/local/opt/php70-pdo-pgsql/pdo_pgsql.so".
• Save the file. (I usually run control + O, control + M).
• Exit the file (control + X).

Hope this helps someone.

To fix this problem, you must edit your php.ini (or extensions.ini) file and comment-out the extensions that are already compiled-in. For example, after editing, your ini file may look like the lines below:

;extension=pcre.so
;extension=spl.so

Source: http://www.somacon.com/p520.php

You should have a /etc/php2/conf.d directory (At least on Ubuntu I do) containing a bunch of .ini files which all get loaded when php runs. These files can contain duplicate settings that conflict with settings in php.ini. In my PHP installation I notice a file conf.d/20-intl.ini with an extension=intl.so setting. I bet that's your conflict.

In my case I had uncoment the ;extension=php_curl.so in php.ini, but Ubuntu was already calling this extension somewhere else.

To find this "somewhere else", on php.ini will informe. On my case: /etc/php/7.1/apache2/conf.d/20-curl.ini was the path.

So now we edit this file (terminal):

sudo nano /etc/php/7.1/apache2/conf.d/20-curl.ini

Comment the ;extension=php_curl.so

Save file and restart apache:

sudo systemctl restart apache2

For issue related to code igniter project upload,
go to the base directory index.php and add this code:

if ($_SERVER['SERVER_NAME'] == 'local_server_name') {
    define('ENVIRONMENT', 'development');
} else {
    define('ENVIRONMENT', 'production');
}

if (defined('ENVIRONMENT')){
    switch (ENVIRONMENT){
        case 'development':
            error_reporting(E_ALL);
        break;

        case 'testing':
        case 'production':
            error_reporting(0);
        break;

        default:
            exit('The application environment is not set correctly.');
    }
}

 
	define('ENVIRONMENT', isset($_SERVER['CI_ENV']) ? $_SERVER['CI_ENV'] : 'development');
    

For shared hosting, in cPanel I unchecked the Module in question under "Select PHP Version" > "Extensions" and the error disappeared for PHP 7.4.

I had the same issue after upgrading from Fedora Server 24 (PHP 5) to 25 (PHP 7). After investigation, I found that /etc/php.d/ had two different .ini files loading extension=geoip.so.

Previous version of distros had this file named 50-geoip.ini but the recent was changed to 40-geoip.ini, and I suspect that in the version-upgrade process the old hasn't been removed, while the new one has been created.

That was the actual case of the issue. After removing stray 50-geoip.ini from /etc/php.d/ and restarting httpd it just worked flawlessly.

I deleted the 20-mongo.ini file in /etc/php5/cli/conf.d and this solved the problem.

I figured this out by printing the PHP configuration and searching by xml.ini. Notice in the following output how xml is loaded twice (first as 20-xml.ini and then as xml.ini):

$ php -i | grep xml
/etc/php.d/20-simplexml.ini,
/etc/php.d/20-xml.ini,
/etc/php.d/20-xmlwriter.ini,
/etc/php.d/30-xmlreader.ini,
/etc/php.d/xml.ini
xmlrpc_error_number => 0 => 0
xmlrpc_errors => Off => Off
libxml Version => 2.9.1
libxml
mbstring.http_output_conv_mimetypes => ^(text/|application/xhtml\+xml) => ^(text /|application/xhtml\+xml)
xml
libxml2 Version => 2.9.1
xmlreader
xmlwriter
libxslt compiled against libxml Version => 2.9.1

There are two "php_intl.dll" files inside php.ini file on 872 and 968 number lines. if php warning module 'intl' already loaded in unknown on line 0 this message is focused on your CLI. Then you should have to remove the semiclone prefixes on line 872. I expect this will done.....

Just for the record as it might help others who are on shared hosting (cPanel).

I had error on shared hosting php7.2: Module 'imagick' already loaded in Unknown on line 0

In the beginning hosting provider said it was my bad configuration (running Yii2.16). But after I showed them, that all Internet related this issue to server configuration -they started to listen to me. After I proved, that there was no error on php7.1 they started to search for the error.

As they told to me - the error was due to configuration in PERL modules or PEAR package, but they did not told me the real issue.

So, if you are on shared hosting - talk to you provider and experiment with PHP versions (if you can change them).

Comment out these two lines in php.ini

;extension=imagick.so
;extension="ixed.5.6.lin"

it should fix the issue.

In Windows 10, I fix this by comment like this

;extension=php_sockets.dll

Run php --ini and notice file path on Loaded Configuration File.
Then run command like cat -n /etc/php/7.2/cli/php.ini | grep intl to find if the extension is commented or not.
Then update loaded configuration file by commenting line by adding ; such as ;extension=intl

This can happen when you install php-intl package and also enable the same extension on php.ini file.

If you are on shared hosting, just apply the default php settings. Cpanel overrides php settings to default.

I am using WAMP in Windows 10 with PHP 7.2.10. I was able to solve it through commenting the line extension=ftp in php.ini inside wamp64\bin\php\php7.2.10 .

I am unsure but my guess why this happens is that my php.ini inside wamp64\bin\apache\apache2.4.35\bin already loads this module.

Be sure to restart all services of WAMP after doing so.

I had the same issue so I commented the extension=mysqli as I included this to run sql server. Check if you have uncommented this extension=mysqli if so, place ; in php.ini

I resolved this issue by removing php.ini file from extension=grpc commenting like this ;extension=grpc

solved by commenting extension=curl

I had a similar problem, the problem was that the extension intl was duplicated.

You can check in file C:/xampp/php/php.ini and find "intl". In my case extension=intl is already present and I scrolled again and found a second intl "extension=php_intl.dll".

The extension must one to execution can't execution extension intl again. This will show error like this "Module 'intl' already loaded".

I fixed it by commenting out extension=php_intl.dll using ";" like this ;extension=php_intl.dll. and restarted the apache service.