Microsoft Excel ActiveX Controls Disabled?

I have some Excel worksheets that use ActiveX checkboxes to control certain activity. They worked recently but today started to give errors. I was alerted to this by a colleague, but it was still working on my computer. I checked his version of Excel against mine and his was newer. I noticed there were new Windows updates, so I did the update. After I applied pending updates, it now no longer works on my computer. I cannot check the ActiveX checkboxes any longer, and, as a part of trying to debug, it appears I cannot even add an ActiveX control to any worksheet, even a new worksheet, any more. I get an error dialog that says, "Cannot insert object." (I can still add form controls, just not ActiveX.) Anyone else experiencing this after a recent update? Any suggestions?

Thanks,

Mike

From other forums, I have learned that it is due to the MS Update and that a good fix is to simply delete the file MSForms.exd from any Temp subfolder in the user's profile. For instance:

C:\Users\[user.name]\AppData\Local\Temp\Excel8.0\MSForms.exd

C:\Users\[user.name]\AppData\Local\Temp\VBE\MSForms.exd

C:\Users\[user.name]\AppData\Local\Temp\Word8.0\MSForms.exd

Of course the application (Excel, Word...) must be closed in order to delete this file.

Here is the best answer that I have found on the Microsoft Excel Support Team Blog

> For some users, Forms Controls (FM20.dll) are no longer working as > expected after installing December 2014 updates. Issues are > experienced at times such as when they open files with existing VBA > projects using forms controls, try to insert a forms control in to a > new worksheet or run third party software that may use these > components. > > You may received errors such as: > > "Cannot insert object" "Object library invalid or contains references > to object definitions that could not be found" > > Additionally, you may be unable to use or change properties of an > ActiveX control on a worksheet or receive an error when trying to > refer to an ActiveX control as a member of a worksheet via code. > Steps to follow after the update: > > To resolve this issue, you must delete the cached versions of the > control type libraries (extender files) on the client computer. To do > this, you must search your hard disk for files that have the ".exd" > file name extension and delete all the .exd files that you find. These > .exd files will be re-created automatically when you use the new > controls the next time that you use VBA. These extender files will be > under the user's profile and may also be in other locations, such as > the following: > > %appdata%\Microsoft\forms > > %temp%\Excel8.0 > > %temp%\VBE > > > Scripting solution: > > Because this problem may affect more than one machine, it is also > possible to create a scripting solution to delete the EXD files and > run the script as part of the logon process using a policy. The script > you would need should contain the following lines and would need to be > run for each USER as the .exd files are USER specific. > > del %temp%\vbe\.exd > > del %temp%\excel8.0\.exd > > del %appdata%\microsoft\forms\.exd > > del %appdata%\microsoft\local\.exd > > del %appdata%\Roaming\microsoft\forms\.exd > > del %temp%\word8.0\.exd > > del %temp%\PPT11.0\*.exd > >
> > Additional step: > > If the steps above do not resolve your issue, another step that can be > tested (see warning below): > > 1. On a fully updated machine and after removing the .exd files, open the file in Excel with edit permissions. > > Open Visual Basic for Applications > modify the project by adding a comment or edit of some kind to any code module > Debug > Compile > VBAProject. > > Save and reopen the file. Test for resolution. If resolved, provide this updated project to additional users. > > Warning: If this step resolves your issue, be aware that after deploying this updated project to the other users, these users will > also need to have the updates applied on their systems and .exd files > removed as well. > > If this does not resolve your issue, it may be a different issue and > further troubleshooting may be necessary. > > Microsoft is currently working on this issue. Watch the blog for > updates.

Source

It was KB2553154. Microsoft needs to release a fix. As a developer of Excel applications we can't go to all our clients computers and delete files off them. We are getting blamed for something Microsoft caused.

I'm an Excel developer, and I definitely felt the pain when this happened. Fortunately, I was able to find a workaround by renaming the MSForms.exd files in VBA even when Excel is running, which also can fix the issue. Excel developers who need to distribute their spreadsheets can add the following VBA code to their spreadsheets to make them immune to the MS update.

Place this code in any module.

Public Sub RenameMSFormsFiles() 
  Const tempFileName As String = "MSForms - Copy.exd"  
  Const msFormsFileName As String = "MSForms.exd"  
  On Error Resume Next 
  
  'Try to rename the C:\Users\[user.name]\AppData\Local\Temp\Excel8.0\MSForms.exd file  
  RenameFile Environ("TEMP") & "\Excel8.0\" & msFormsFileName, Environ("TEMP") & "\Excel8.0\" & tempFileName 
  'Try to rename the C:\Users\[user.name]\AppData\Local\Temp\VBE\MSForms.exd file  
  RenameFile Environ("TEMP") & "\VBE\" & msFormsFileName, Environ("TEMP") & "\VBE\" & tempFileName 
End Sub  

Private Sub RenameFile(fromFilePath As String, toFilePath As String) 
  If CheckFileExist(fromFilePath) Then 
      DeleteFile toFilePath  
      Name fromFilePath As toFilePath  
  End If  
End Sub

Private Function CheckFileExist(path As String) As Boolean 
  CheckFileExist = (Dir(path) <> "")  
End Function  

Private Sub DeleteFile(path As String) 
  If CheckFileExist(path) Then 
      SetAttr path, vbNormal  
      Kill path  
  End If  
End Sub    

The RenameMSFormsFiles subroutine tries to rename the MSForms.exd files in the C:\Users\[user.name]\AppData\Local\Temp\Excel8.0\ and C:\Users\[user.name]\AppData\Local\Temp\VBE\ folders to MSForms - Copy.exd.

Then call the RenameMSFormsFiles subroutine at the very beginning of the Workbook_Open event.

Private Sub Workbook_Open() 
  RenameMSFormsFiles  
End Sub

The spreadsheet will try to rename the MSForms.exd files when it opens. Obviously, this is not a perfect fix:

1. The affected user will still experience the ActiveX control errors when running the VBA code the very first time opening the spreadsheet. Only after executing the VBA code once and restarting Excel, the issue is fixed. Normally when a user encounters a broken spreadsheet, the knee-jerk reaction is to close Excel and try to open the spreadsheet again. :)
2. The MSForms.exd files are renamed every time the spreadsheet opens, even when there's no issue with the MSForms.exd files. But the spreadsheet will work just fine.

At least for now, Excel developers can continue to distribute their work with this workaround until Microsoft releases a fix.

I've posted this solution here.

With Windows 8.1 I couldn't find any .exd files using windows search. On the other hand, a cmd command dir *.exd /S found the one file on my system.

Advice in KB and above didn't work for me. I discovered that if one Excel 2007 user (with or without the security update; not sure of exact circumstances that cause this) saves the file, the original error returns.

I discovered that the fastest way to repair the file again is to delete all the VBA code. Save. Then replace the VBA code (copy/paste). Save. Before attempting this, I delete the .EXD files first, because otherwise I get an error on open.

In my case, I cannot upgrade/update all users of my Excel file in various locations. Since the problem comes back after some users save the Excel file, I am going to have to replace the ActiveX control with something else.

The best source of information and updates on this issue I could find is in the TechNet Blogs » The Microsoft Excel Support Team Blog (as mentioned):

Form Controls stop working after December 2014 Updates (Updated March 10, 2015)

On March 2015 a hotfix was released in addition to the automated fix-it and manual instructions, and it's available on Windows Update as well.

The latest update and fix from Microsoft: 3025036 "Cannot insert object" error in an ActiveX custom Office solution after you install the MS14-082 security update

> ###STATUS: Update March 10, 2015: Hotfixes for this issue have been released in the March 2015 Updates for Office 2007, 2010 & 2013.

###General info about the problem:

> For some users, Form Controls (FM20.dll) are no longer working as expected after installing MS14-082 Microsoft Office Security Updates for December 2014. Issues are experienced at times such as when they open files with existing VBA projects using forms controls, try to insert a forms control in to a new worksheet or run third party software that may use these components.

> https://technet.microsoft.com/en-us/library/security/ms14-082.aspx

> You may receive errors such as: > "Cannot insert object"; "Object library invalid or contains references to object definitions that could not be found"; "The program used to create this object is Forms. That program is either not installed on your computer or it is not responding. To edit this object, install Forms or ensure that any dialog boxes in Forms are closed." [...] > Additionally, you may be unable to use or change properties of an ActiveX control on a worksheet or receive an error when trying to refer to an ActiveX control as a member of a worksheet via code.

###Manual and additional solutions:

> Scripting solution:

> Because this problem may affect more than one machine, it is also possible to create a scripting solution to delete the EXD files and run the script as part of the logon process using a policy. The script you would need should contain the following lines and would need to be run for each USER as the .exd files are USER specific.

del %temp%\vbe\*.exd
del %temp%\excel8.0\*.exd
del %appdata%\microsoft\forms\*.exd
del %appdata%\microsoft\local\*.exd
del %temp%\word8.0\*.exd
del %temp%\PPT11.0\*.exd

> Additional step:

> If the steps above do not resolve your issue, another step that can be tested (see warning below):

> 1. On a fully updated machine and after removing the .exd files, open the file in Excel with edit permissions.

> 2. Open Visual Basic for Applications > modify the project by adding a comment or edit of some kind to any code module > Debug > Compile VBAProject.

> 3. Save and reopen the file. Test for resolution.

> If resolved, provide this updated project to additional users.

> Warning: If this step resolves your issue, be aware that after deploying this updated project to the other users, these users will also need to have the updates applied on their systems and .exd files removed as well.

Simplified instructions for end-users. Feel free to copy/paste the following.

Here’s how to fix the problem when it comes up:

1. Close all your Office programs and files.
2. Open Windows Explorer and type %TEMP% into the address bar, then press Enter. This will take you into the system temporary folder.
3. Locate and delete the following folders: Excel8.0, VBE, Word8.0
4. Now try to use your file again, it shouldn't have any problems.

You might need to wait until the problem occurs in order for this fix to work. Applying it prematurely (before the Windows Update gets installed on your system) won't help.

I did finally find this answer on the official Microsoft KB:

http://support.microsoft.com/kb/3025036/EN-US

No new information here than what we have in previous answers, but at least it acknowledges that Microsoft is aware of the issue.

I know many answers have already been posted for this, but neither one answer independently worked for my site. So here is what worked for me:

Step 1: Uninstall the following updates - KB2920789, KB2920790, KB2920792, KB2920793, KB2984942, KB2596927

Step 2: Hide these updates so they do not get installed on subsequent reboots

Step 3: Delete folder Excel8.0 from C:\Users<>\AppData\Local\Temp

Step 4: Restart workstatiion (I would also make sure the above mentioned KBs did not inadvertently get applied)

I want to provide an answer that worked as the only thing for me (I realize that I might be the only one ever). I had in one macro that I was calling using the ribbon. It had the following code:

colStore = new Collection

I wasn't aware that it throws an error so I was baffled and tried everything in here. The button just stopped working and I couldn't get it to work. When I noticed the error and corrected it to:

Set colStore = new Collection

It started working again. Absolutely strange if you ask me but maybe it helps someone out there who was as desperate as me.