In where shall I use isset() and !empty()

I read somewhere that the isset() function treats an empty string as TRUE, therefore isset() is not an effective way to validate text inputs and text boxes from a HTML form.

So you can use empty() to check that a user typed something.

1. Is it true that the isset() function treats an empty string as TRUE?

2. Then in which situations should I use isset()? Should I always use !empty() to check if there is something?

For example instead of

if(isset($_GET['gender']))...

Using this

if(!empty($_GET['gender']))...

isset vs. !empty

FTA:

> "isset() checks if a variable has a > value including (False, 0 or empty > string), but not NULL. Returns TRUE > if var exists; FALSE otherwise. > > On the other hand the empty() function > checks if the variable has an empty > value empty string, 0, NULL or > False. Returns FALSE if var has a > non-empty and non-zero value."

In the most general way :

• isset tests if a variable (or an element of an array, or a property of an object) exists (and is not null)
• empty tests if a variable (...) contains some non-empty data.

To answer question 1 :

$str = '';
var_dump(isset($str));

gives

boolean true

Because the variable $str exists.

And question 2 :

You should use isset to determine whether a variable exists ; for instance, if you are getting some data as an array, you might need to check if a key isset in that array.
Think about $_GET / $_POST, for instance.

Now, to work on its value, when you know there is such a value : that is the job of empty.

isset is intended to be used only for variables and not just values, so isset("foobar") will raise an error. As of PHP 5.5, empty supports both variables and expressions.

So your first question should rather be if isset returns true for a variable that holds an empty string. And the answer is:

$var = "";
var_dump(isset($var));

The type comparison tables in PHP’s manual is quite handy for such questions.

isset basically checks if a variable has any value other than null since non-existing variables have always the value null. empty is kind of the counter part to isset but does also treat the integer value 0 and the string value "0" as empty. (Again, take a look at the type comparison tables.)

Neither is a good way to check for valid input.

• isset() is not sufficient because – as has been noted already – it considers an empty string to be a valid value.
• ! empty() is not sufficient either because it rejects '0', which could be a valid value.

Using isset() combined with an equality check against an empty string is the bare minimum that you need to verify that an incoming parameter has a value without creating false negatives:

if( isset($_GET['gender']) and ($_GET['gender'] != '') )
{
  ...
}

But by "bare minimum", I mean exactly that. All the above code does is determine whether there is some value for $_GET['gender']. It does not determine whether the value for $_GET['gender'] is valid (e.g., one of ("Male", "Female", "FileNotFound")).

For that, see Josh Davis's answer.

If you have a $_POST['param'] and assume it's string type then

isset($_POST['param']) && $_POST['param'] != '' && $_POST['param'] != '0'

is identical to

!empty($_POST['param'])

> isset() is not an effective way to validate text inputs and text boxes from a HTML form

You can rewrite that as "isset() is not a way to validate input." To validate input, use PHP's filter extension. filter_has_var() will tell you whether the variable exists while filter_input() will actually filter and/or sanitize the input.

Note that you don't have to use filter_has_var() prior to filter_input() and if you ask for a variable that is not set, filter_input() will simply return null.

When and how to use:

1. isset()

True for 0, 1, empty string, a string containing a value, true, false

False for null

e.g

$status = 0
if (isset($status)) // True
$status = null 
if (isset($status)) // False

2. Empty

False for 1, a string containing a value, true

True for null, empty string, 0, false e.g

$status = 0
if(empty($status)) // true
$status = 1
if(empty($status)) // False

isset is used to determine if an instance of something exists that is, if a variable has been instantiated... it is not concerned with the value of the parameter...

Pascal MARTIN... +1 ...

empty() does not generate a warning if the variable does not exist... therefore, isset() is preferred when testing for the existence of a variable when you intend to modify it...

isset() is used to check if the variable is set with the value or not and Empty() is used to check if a given variable is empty or not.

isset() returns true when the variable is not null whereas Empty() returns true if the variable is an empty string.

isset() vs empty() vs is_null()

Using empty is enough:

if(!empty($variable)){
    // Do stuff
}

Additionally, if you want an integer value it might also be worth checking that intval($variable) !== FALSE.

isset($variable) === (@$variable !== null)
empty($variable) === (@$variable == false)

I came here looking for a quick way to check if a variable has any content in it. None of the answers here provided a full solution, so here it is:

---

It's enough to check if the input is '' or null, because:

Request URL .../test.php?var= results in $_GET['var'] = ''

Request URL .../test.php results in $_GET['var'] = null

---

isset() returns false only when the variable exists and is not set to null, so if you use it you'll get true for empty strings ('').

empty() considers both null and '' empty, but it also considers '0' empty, which is a problem in some use cases.

If you want to treat '0' as empty, then use empty(). Otherwise use the following check:

$var .'' !== '' evaluates to false only for the following inputs:

• ''
• null
• false

I use the following check to also filter out strings with only spaces and line breaks:

function hasContent($var){
    return trim($var .'') !== '';
}

I use the following to avoid notices, this checks if the var it's declarated on GET or POST and with the @ prefix you can safely check if is not empty and avoid the notice if the var is not set:

if( isset($_GET['var']) && @$_GET['var']!='' ){
    //Is not empty, do something
}

    $var = '';
// Evaluates to true because $var is empty
if ( empty($var) ) {
echo '$var is either 0, empty, or not set at all';
}
// Evaluates as true because $var is set
if ( isset($var) ) {
 echo '$var is set even though it is empty';
    }

Source: Php.net

isset() tests if a variable is set and not null:

http://us.php.net/manual/en/function.isset.php

empty() can return true when the variable is set to certain values:

http://us.php.net/manual/en/function.empty.php

<?php

$the_var = 0;

if (isset($the_var)) {
  echo "set";
} else {
  echo "not set";
}

echo "\n";

if (empty($the_var)) {
  echo "empty";
} else {
  echo "not empty";
}
?>

!empty will do the trick. if you need only to check data exists or not then use isset other empty can handle other validations

<?php
$array = [ "name_new" => "print me"];

if (!empty($array['name'])){
   echo $array['name'];
}

//output : {nothing}

////////////////////////////////////////////////////////////////////

$array2 = [ "name" => NULL];

if (!empty($array2['name'])){
   echo $array2['name'];
}

//output : {nothing}

////////////////////////////////////////////////////////////////////

$array3 = [ "name" => ""];

if (!empty($array3['name'])){
   echo $array3['name'];
}

//output : {nothing}  

////////////////////////////////////////////////////////////////////

$array4 = [1,2];

if (!empty($array4['name'])){
   echo $array4['name'];
}

//output : {nothing}

////////////////////////////////////////////////////////////////////

$array5 = [];

if (!empty($array5['name'])){
   echo $array5['name'];
}

//output : {nothing}

?>

Please consider behavior may change on different PHP versions

From documentation

isset() Returns TRUE if var exists and has any value other than NULL. FALSE otherwise https://www.php.net/manual/en/function.isset.php

empty() does not exist or if its value equals FALSE https://www.php.net/manual/en/function.empty.php

(empty($x) == (!isset($x) || !$x)) // returns true;

(!empty($x) == (isset($x) && $x)) // returns true;

When in doubt, use this one to check your Value and to clear your head on the difference between isset and empty.

if(empty($yourVal)) {
  echo "YES empty - $yourVal"; // no result
}
if(!empty($yourVal)) {
  echo "<P>NOT !empty- $yourVal"; // result
}
if(isset($yourVal)) {
  echo "<P>YES isset - $yourVal";  // found yourVal, but result can still be none - yourVal is set without value
}
if(!isset($yourVal)) {
  echo "<P>NO !isset - $yourVal"; // $yourVal is not set, therefore no result
}