HTTP test server accepting GET/POST requests
HttpPostHttp Problem Overview
I need a live test server that accepts my requests for basic information via HTTP GET and also allows me to POST (even if it's really not doing anything). This is entirely for test purposes.
A good example is here. It easily accepts GET requests, but I need one that accepts POST requests as well.
Does anyone know of a server that I can send dummy test messages too?
Http Solutions
Solution 1 - Http
It echoes the data used in your request for any of these types:
- https://httpbin.org/anything Returns most of the below.
- https://httpbin.org/ip Returns Origin IP.
- https://httpbin.org/user-agent Returns user-agent.
- https://httpbin.org/headers Returns header dict.
- https://httpbin.org/get Returns GET data.
- https://httpbin.org/post Returns POST data.
- https://httpbin.org/put Returns PUT data.
- https://httpbin.org/delete Returns DELETE data
- https://httpbin.org/gzip Returns gzip-encoded data.
- https://httpbin.org/status/:code Returns given HTTP Status code.
- https://httpbin.org/response-headers?key=val Returns given response headers.
- https://httpbin.org/redirect/:n 302 Redirects n times.
- https://httpbin.org/relative-redirect/:n 302 Relative redirects n times.
- https://httpbin.org/cookies Returns cookie data.
- https://httpbin.org/cookies/set/:name/:value Sets a simple cookie.
- https://httpbin.org/basic-auth/:user/:passwd Challenges HTTPBasic Auth.
- https://httpbin.org/hidden-basic-auth/:user/:passwd 404'd BasicAuth.
- https://httpbin.org/digest-auth/:qop/:user/:passwd Challenges HTTP Digest Auth.
- https://httpbin.org/stream/:n Streams n–100 lines.
- https://httpbin.org/delay/:n Delays responding for n–10 seconds.
Solution 2 - Http
There is http://ptsv2.com/
> "Here you will find a server which receives any POST you wish to give it and stores the contents for you to review."
Solution 3 - Http
Webhook Tester is a great tool: https://webhook.site (GitHub)
Important for me, it showed the IP of the requester, which is helpful when you need to whitelist an IP address but aren't sure what it is.
Solution 4 - Http
http://requestb.in was similar to the already mentioned tools and also had a very nice UI.
> RequestBin gives you a URL that will collect requests made to it and let you inspect them in a human-friendly way. Use RequestBin to see what your HTTP client is sending or to inspect and debug webhook requests.
Though it has been discontinued as of Mar 21, 2018.
>We have discontinued the publicly hosted version of RequestBin due to ongoing abuse that made it very difficult to keep the site up reliably. Please see https://github.com/Runscope/requestbin#readme">instructions</a> for setting up your own self-hosted instance.
Solution 5 - Http
nc one-liner local test server
Setup a local test server in one line under Linux:
nc -kdl localhost 8000
Sample request maker on another shell:
wget http://localhost:8000
then on the first shell you see the request showed up:
GET / HTTP/1.1
User-Agent: Wget/1.19.4 (linux-gnu)
Accept: */*
Accept-Encoding: identity
Host: localhost:8000
Connection: Keep-Alive
nc from the netcat-openbsd package is widely available and pre-installed on Ubuntu.
Tested on Ubuntu 18.04.
Solution 6 - Http
If you want a local test server that accepts any URL and just dumps the request to the console, you can use node:
const http = require("http");
const hostname = "0.0.0.0";
const port = 3000;
const server = http.createServer((req, res) => {
console.log(`\n${req.method} ${req.url}`);
console.log(req.headers);
req.on("data", function(chunk) {
console.log("BODY: " + chunk);
});
res.statusCode = 200;
res.setHeader("Content-Type", "text/plain");
res.end("Hello World\n");
});
server.listen(port, hostname, () => {
console.log(`Server running at http://localhost:${port}/`);
});
Save it in a file 'echo.js' and run it as follows:
$ node echo.js
Server running at http://localhost:3000/
You can then submit data:
$ curl -d "[1,2,3]" -XPOST http://localhost:3000/foo/bar
which will be shown in the server's stdout:
POST /foo/bar
{ host: 'localhost:3000',
'user-agent': 'curl/7.54.1',
accept: '*/*',
'content-length': '7',
'content-type': 'application/x-www-form-urlencoded' }
BODY: [1,2,3]
Solution 7 - Http
Have a look at PutsReq, it's similar to the others, but it also allows you to write the responses you want using JavaScript.
Solution 8 - Http
Here is one Postman echo: https://docs.postman-echo.com/
example:
curl --request POST \
--url https://postman-echo.com/post \
--data 'This is expected to be sent back as part of response body.'
response:
{"args":{},"data":"","files":{},"form":{"This is expected to be sent back as part of response body.":""},"headers":{"host":"postman-echo.com","content-length":"58","accept":"*/*","content-type":"application/x-www-form-urlencoded","user-agent":"curl/7.54.0","x-forwarded-port":"443","x-forwarded-proto":"https"},"json":{"...
Solution 9 - Http
You can run the actual Ken Reitz's httpbin server locally (under docker or on bare metal):
https://github.com/postmanlabs/httpbin
Run dockerized
docker pull kennethreitz/httpbin
docker run -p 80:80 kennethreitz/httpbin
Run directly on your machine
## install dependencies
pip3 install gunicorn decorator httpbin werkzeug Flask flasgger brotlipy gevent meinheld six pyyaml
## start the server
gunicorn -b 0.0.0.0:8000 httpbin:app -k gevent
Now you have your personal httpbin instance running on http://0.0.0.0:8000 (visible to all of your LAN)
Minimal Flask REST server
I wanted a server which returns predefined responses so I found that in this case it's simpler to use a minimal Flask app:
#!/usr/bin/env python3
# Install dependencies:
# pip3 install flask
import json
from flask import Flask, request, jsonify
app = Flask(__name__)
@app.route('/', methods=['GET', 'POST'])
def root():
# spit back whatever was posted + the full env
return jsonify(
{
'request.json': request.json,
'request.values': request.values,
'env': json.loads(json.dumps(request.__dict__, sort_keys=True, default=str))
}
)
@app.route('/post', methods=['GET', 'POST'])
def post():
if not request.json:
return 'No JSON payload! Expecting POST!'
# return the literal POST-ed payload
return jsonify(
{
'payload': request.json,
}
)
@app.route('/users/<gid>', methods=['GET', 'POST'])
def users(gid):
# return a JSON list of users in a group
return jsonify([{'user_id': i,'group_id': gid } for i in range(42)])
@app.route('/healthcheck', methods=['GET'])
def healthcheck():
# return some JSON
return jsonify({'key': 'healthcheck', 'status': 200})
if __name__ == "__main__":
with app.test_request_context():
app.debug = True
app.run(debug=True, host='0.0.0.0', port=8000)
Solution 10 - Http
Create choose a free web host and put the following code
<h1>Request Headers</h1>
<?php
$headers = apache_request_headers();
foreach ($headers as $header => $value) {
echo "<b>$header:</b> $value <br />\n";
}
?>
Solution 11 - Http
https://www.mockable.io. It has nice feature of getting endpoints without login (24h temporary account)
Solution 12 - Http
I have created an open-source hackable local testing server that you can get running in minutes. You can create new API's, define your own response and hack it in any ways you wish to.
Github Link : https://github.com/prabodhprakash/localTestingServer
Solution 13 - Http
I don't konw why all of the answers here make a very simple work very hard!
When there is a request on HTTP, actually a client will send a HTTP_MESSAGE to server (read about what is HTTP_MESSAGE) and you can make a server in just 2 simple steps:
-
Install netcat:
In many unix-based systems you have this already installed and if you have windows just google it , the installation process is really simple, you just need a nc.exe file and then you should copy the path of this nc.exe file to your path environment variable and check if every think is OK with
nc -h -
Make a server which is listening on
localhost:12345:just type
nc -l -p 12345on your terminal and everything is done! (in macnc -l 12345tnx Silvio Biasiol)
Now you have a server which is listening on http://localhost:12345 make a post request with:
axios.post('http://localhost:12345', { firstName: 'Fred' })
If you are a js developer or make your own xhr or make a form in a HTML file and submit it to server, sth. like:
<form action="http://localhost:12345" method="post">
or make a request with curl or wget or etc. Then check your terminal, a raw HTTP_MESSAGE should be appear on your terminal and you can start your happy hacking ;)
Solution 14 - Http
You might don't need any web site for that, only open up the browser, press F12 to get access to developer tools > console, then in console write some JavaScript Code to do that.
Here I share some ways to accomplish that:
For GET request: *.Using jQuery:
$.get("http://someurl/status/?messageid=597574445", function(data, status){
console.log(data, status);
});
For POST request:
- Using jQuery
$.ajax:
var url= "http://someurl/",
api_key = "6136-bc16-49fb-bacb-802358",
token1 = "Just for test",
result;
$.ajax({
url: url,
type: "POST",
data: {
api_key: api_key,
token1: token1
},
}).done(function(result) {
console.log("done successfuly", result);
}).fail(function(error) {
console.log(error.responseText, error);
});
- Using jQuery, append and submit
var merchantId = "AA86E",
token = "4107120133142729",
url = "https://payment.com/Index";
var form = `<form id="send-by-post" method="post" action="${url}">
<input id="token" type="hidden" name="token" value="${merchantId}"/>
<input id="merchantId" name="merchantId" type="hidden" value="${token}"/>
<button type="submit" >Pay</button>
</div>
</form> `;
$('body').append(form);
$("#send-by-post").submit();//Or $(form).appendTo("body").submit();
- Using Pure JavaScript:
`var api_key = "73736-bc16-49fb-bacb-643e58",
recipient = "095552565",
token1 = "4458",
url = 'http://smspanel.com/send/';`
``var form = `<form id="send-by-post" method="post" action="${url}">
<input id="api_key" type="hidden" name="api_key" value="${api_key}"/>
<input id="recipient" type="hidden" name="recipient" value="${recipient}"/>
<input id="token1" name="token1" type="hidden" value="${token1}"/>
<button type="submit" >Send</button>
</div>
</form>`;``
document.querySelector("body").insertAdjacentHTML('beforeend',form);
document.querySelector("#send-by-post").submit();
- Or even using ASP.Net:
var url = "https://Payment.com/index";
Response.Clear();
var sb = new System.Text.StringBuilder();
sb.Append("<html>");
sb.AppendFormat("<body onload='document.forms[0].submit()'>");
sb.AppendFormat("<form action='{0}' method='post'>", url);
sb.AppendFormat("<input type='hidden' name='merchantId' value='{0}'>", "C668");
sb.AppendFormat("<input type='hidden' name='Token' value='{0}'>", "22720281459");
sb.Append("</form>");
sb.Append("</body>");
sb.Append("</html>");
Response.Write(sb.ToString());
Response.End();
Solution 15 - Http
I am not sure if anyone would take this much pain to test GET and POST calls. I took Python Flask module and wrote a function that does something similar to what @Robert shared.
from flask import Flask, request
app = Flask(__name__)
@app.route('/method', methods=['GET', 'POST'])
@app.route('/method/<wish>', methods=['GET', 'POST'])
def method_used(wish=None):
if request.method == 'GET':
if wish:
if wish in dir(request):
ans = None
s = "ans = str(request.%s)" % wish
exec s
return ans
else:
return 'This wish is not available. The following are the available wishes: %s' % [method for method in dir(request) if '_' not in method]
else:
return 'This is just a GET method'
else:
return "You are using POST"
When I run this, this follows:
C:\Python27\python.exe E:/Arindam/Projects/Flask_Practice/first.py
* Restarting with stat
* Debugger is active!
* Debugger PIN: 581-155-269
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)
Now lets try some calls. I am using the browser.
-
This is just a GET method -
http://127.0.0.1:5000/method/NotCorrect
This wish is not available. The following are the available wishes:['application', 'args', 'authorization', 'blueprint', 'charset', 'close', 'cookies', 'data', 'date', 'endpoint', 'environ', 'files', 'form', 'headers', 'host', 'json', 'method', 'mimetype', 'module', 'path', 'pragma', 'range', 'referrer', 'scheme', 'shallow', 'stream', 'url', 'values'] -
http://127.0.0.1:5000/method/environ
{'wsgi.multiprocess': False, 'HTTP_COOKIE': 'csrftoken=YFKYYZl3DtqEJJBwUlap28bLG1T4Cyuq', 'SERVER_SOFTWARE': 'Werkzeug/0.12.2', 'SCRIPT_NAME': '', 'REQUEST_METHOD': 'GET', 'PATH_INFO': '/method/environ', 'SERVER_PROTOCOL': 'HTTP/1.1', 'QUERY_STRING': '', 'werkzeug.server.shutdown': , 'HTTP_USER_AGENT': 'Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/54.0.2840.71 Safari/537.36', 'HTTP_CONNECTION': 'keep-alive', 'SERVER_NAME': '127.0.0.1', 'REMOTE_PORT': 49569, 'wsgi.url_scheme': 'http', 'SERVER_PORT': '5000', 'werkzeug.request': , 'wsgi.input': , 'HTTP_HOST': '127.0.0.1:5000', 'wsgi.multithread': False, 'HTTP_UPGRADE_INSECURE_REQUESTS': '1', 'HTTP_ACCEPT': "text/html,application/xhtml+xml,application/xml;q=0.9,image/webp,*/*;q=0.8", 'wsgi.version': (1, 0), 'wsgi.run_once': False, 'wsgi.errors': ", mode 'w' at 0x0000000002042150>", 'REMOTE_ADDR': '127.0.0.1', 'HTTP_ACCEPT_LANGUAGE': 'en-US,en;q=0.8', 'HTTP_ACCEPT_ENCODING': 'gzip, deflate, sdch, br'}
Solution 16 - Http
If you need or want a simple HTTP server with the following:
- Can be run locally or in a network sealed from the public Internet
- Has some basic auth
- Handles POST requests
I built one on top of the excellent SimpleHTTPAuthServer already on PyPI. This adds handling of POST requests: https://github.com/arielampol/SimpleHTTPAuthServerWithPOST
Otherwise, all the other options publicly available are already so good and robust.
Solution 17 - Http
Another one that offers some customization and is easy to use (no install, signup) is https://beeceptor.com .
You create a endpoint, makes a initial request to it and can tweak the responses.
Solution 18 - Http
some online httpbin:
get client ip, port, ua..
get client ip, isp
Solution 19 - Http
Just set one up yourself. Copy this snippet to your webserver.
echo "<pre>"; print_r($_POST); echo "</pre>";
Just post what you want to that page. Done.