How to upgrade OpenSSL in CentOS 6.5 / Linux / Unix from source?

How do I upgrade OpenSSL in CentOS 6.5?

I have used these commands, but nothings happens:

 cd /usr/src
 wget http://www.openssl.org/source/openssl-1.0.1g.tar.gz
 tar -zxf openssl-1.0.1g.tar.gz
 cd openssl-1.0.1g
 ./config
 make
 make test
 make install
 cd /usr/src
 rm -rf openssl-1.0.1g.tar.gz
 rm -rf openssl-1.0.1g

After using this command, I get the old version

openssl version

The fix for the heartbleed vulnerability has been backported to 1.0.1e-16 by Red Hat for Enterprise Linux see, and this is therefore the official fix that CentOS ships.

Replacing OpenSSL with the latest version from upstream (i.e. 1.0.1g) runs the risk of introducing functionality changes which may break compatibility with applications/clients in unpredictable ways, causes your system to diverge from RHEL, and puts you on the hook for personally maintaining future updates to that package. By replacing openssl using a simple make config && make && make install means that you also lose the ability to use rpm to manage that package and perform queries on it (e.g. verifying all the files are present and haven't been modified or had permissions changed without also updating the RPM database).

I'd also caution that crypto software can be extremely sensitive to seemingly minor things like compiler options, and if you don't know what you're doing, you could introduce vulnerabilities in your local installation.

./config --prefix=/usr --openssldir=/usr/local/openssl shared

Try this config line instead to overwrite the default. It installs to prefix /usr/local/ssl by default in your setup when you leave off the prefix. You probably have "/usr/local/ssl/bin/openssl" instead of overwriting /usr/bin/openssl. You can also use /usr/local for prefix instead, but you would need to adjust your path accordingly if that is not already on your path. Here is the INSTALL documentation:

  $ ./config
  $ make
  $ make test
  $ make install

 [If any of these steps fails, see section Installation in Detail below.]

This will build and install OpenSSL in the default location, which is (for
historical reasons) /usr/local/ssl. If you want to install it anywhere else,
run config like this:

  $ ./config --prefix=/usr/local --openssldir=/usr/local/openssl

https://github.com/openssl/openssl/blob/master/INSTALL http://heartbleed.com/

To manually compile OpenSSL, do as follows:

$ cd /usr/src

$ wget https://www.openssl.org/source/openssl-1.0.1g.tar.gz -O openssl-1.0.1g.tar.gz

$ tar -zxf openssl-1.0.1g.tar.gz

$ cd openssl-1.0.1g

$ ./config

$ make

$ make test

$ make install

$ openssl version

If it shows the old version, do the steps below.

$ mv /usr/bin/openssl /root/

$ ln -s /usr/local/ssl/bin/openssl /usr/bin/openssl
openssl version
OpenSSL 1.0.1g 7 Apr 2014

http://olaitanmayowa.com/heartbleed-how-to-upgrade-openssl-in-centos/

sudo yum update openssl is all you need.

This will bring you up to openssl-1.0.1e-16.el6_5.7.

You need to restart Apache after the update. Or better yet, reboot the box if possible, so that all applications that use OpenSSL will load the new version.

The only thing you have to do is perform an yum update.

It will automatically download and update a backported version of openssl-1.0.1e-16.el6_5.7 which has been patched by RedHat with heartbeat disabled.

To verify the update simply check the changelog:
# rpm -q --changelog openssl-1.0.1e | grep -B 1 CVE-2014-0160
you should see the following:
`* Mon Apr 07 2014 Tomáš Mráz <[email protected]> 1.0.1e-16.7

• fix CVE-2014-0160 - information disclosure in TLS heartbeat extension`

Make sure you reboot the server because important services such as Apache and SSH use openSSL.

My approach was:

openssl version
OpenSSL 1.0.1e 11 Feb 2013

wget https://www.openssl.org/source/openssl-1.0.2a.tar.gz
wget http://www.linuxfromscratch.org/patches/blfs/svn/openssl-1.0.2a-fix_parallel_build-1.patch
tar xzf openssl-1.0.2a.tar.gz
cd openssl-1.0.2a
patch -Np1 -i ../openssl-1.0.2a-fix_parallel_build-1.patch
./config --prefix=/usr --openssldir=/etc/ssl --libdir=lib shared zlib-dynamic
make
make install

openssl version
OpenSSL 1.0.2a 19 Mar 2015 

I agree that in 95% of cases, all you need is sudo yum update openssl

However, if you need a specific version of openssl or specific functionality, which is not in CentOS repository, you probably need to compile from source. The other answers here were incomplete. Below is what worked (CentOS 6.9), although this may introduce incompatibilities with installed software, and will not auto-update the openssl.

---

Choose openssl version from https://www.openssl.org/source/

• At the time of this writing July 1, 2017, the needed version was dated 2017-May-25 13:09:51, openssl-1.1.0f.tar.gz
• Copy the desired link, and use below, in our case ( https://www.openssl.org/source/openssl-1.1.0f.tar.gz )

Log-in as root:

cd /usr/local/src/

# OPTIONALLY CHANGE openssl-1.1.0f.tar.gz to the version which you want
wget https://www.openssl.org/source/openssl-1.1.0f.tar.gz

sha256sum openssl-1.1.0f.tar.gz  #confirm this matches the published hash

tar -zxf openssl-1.1.0f.tar.gz

cd /usr/local/src/openssl-1.1.0f

./config --prefix=/usr/local --openssldir=/usr/local/openssl
make
make test
make install

export LD_LIBRARY_PATH=/usr/local/lib64

#make export permanent
echo "export LD_LIBRARY_PATH=/usr/local/lib64" > /etc/profile.d/ld_library_path.sh
chmod ugo+x /etc/profile.d/ld_library_path.sh

openssl version  #confirm it works

#recommended reboot here

openssl version  #confirm it works after reboot

rpm -qa openssl yum clean all && yum update "openssl*" lsof -n | grep ssl | grep DEL cd /usr/src wget http://www.openssl.org/source/openssl-1.0.1g.tar.gz tar -zxf openssl-1.0.1g.tar.gz cd openssl-1.0.1g ./config --prefix=/usr --openssldir=/usr/local/openssl shared ./config make make test make install cd /usr/src rm -rf openssl-1.0.1g.tar.gz rm -rf openssl-1.0.1g

and

openssl version

it is easy! you are downloading the binary file?. download the rpm latest package openssl-1.0.1e-30.el6.x86_64 check what was the current version using rpm -q openssl. if this is older then do rpm -U openssl-1.0.1e-30.el6.x86_64 . if yum is configured updated this package in the repo and do yum update openssl if your repo in RHN do simply yum update openssl-1.0.1g is very old and valnuarable

You can also check the local changelog to verify whether or not OpenSSL is patched against the vulnerability with the following command:

rpm -q --changelog openssl | grep CVE-2014-0224

If a result is not returned, then you must patch OpenSSL.

http://www.liquidweb.com/kb/update-and-patch-openssl-for-the-ccs-injection-vulnerability/

You should replace the old OpenSSL binary file by the new one via a symlink:

sudo ln -sf /usr/local/ssl/bin/openssl `which openssl`

Remember that after this procedure you should reboot the server or restart all the services related to OpenSSL.