How to print to console when using Qt

C++ Problem Overview

I'm using Qt4 and C++ for making some programs in computer graphics. I need to be able to print some variables in my console at run-time, not debugging, but cout doesn't seem to work even if I add the libraries. Is there a way to do this?

C++ Solutions

Solution 1 - C++

If it is good enough to print to stderr, you can use the following streams originally intended for debugging:

#include<QDebug>

//qInfo is qt5.5+ only.
qInfo() << "C++ Style Info Message";
qInfo( "C Style Info Message" );

qDebug() << "C++ Style Debug Message";
qDebug( "C Style Debug Message" );

qWarning() << "C++ Style Warning Message";
qWarning( "C Style Warning Message" );

qCritical() << "C++ Style Critical Error Message";
qCritical( "C Style Critical Error Message" );

// qFatal does not have a C++ style method.
qFatal( "C Style Fatal Error Message" );

Though as pointed out in the comments, bear in mind qDebug messages are removed if QT_NO_DEBUG_OUTPUT is defined

If you need stdout you could try something like this (as Kyle Strand has pointed out):

QTextStream& qStdOut()
{
    static QTextStream ts( stdout );
    return ts;
}

You could then call as follows:

qStdOut() << "std out!";

Solution 2 - C++

I found this most useful:

#include <QTextStream>

QTextStream out(stdout);
foreach(QString x, strings)
    out << x << endl;

Solution 3 - C++

Writing to `stdout`

If you want something that, like std::cout, writes to your application's standard output, you can simply do the following (credit to CapelliC):

QTextStream(stdout) << "string to print" << endl;

If you want to avoid creating a temporary QTextStream object, follow Yakk's suggestion in the comments below of creating a function to return a static handle for stdout:

inline QTextStream& qStdout()
{
    static QTextStream r{stdout};
    return r;
}

...

foreach(QString x, strings)
    qStdout() << x << endl;

Remember to flush the stream periodically to ensure the output is actually printed.

Writing to `stderr`

Note that the above technique can also be used for other outputs. However, there are more readable ways to write to stderr (credit to Goz and the comments below his answer):

qDebug() << "Debug Message";    // CAN BE REMOVED AT COMPILE TIME!
qWarning() << "Warning Message";
qCritical() << "Critical Error Message";
qFatal("Fatal Error Message");  // WILL KILL THE PROGRAM!

qDebug() is closed if QT_NO_DEBUG_OUTPUT is turned on at compile-time.

(Goz notes in a comment that for non-console apps, these can print to a different stream than stderr.)

NOTE: All of the Qt print methods assume that const char* arguments are ISO-8859-1 encoded strings with terminating \0 characters.

Solution 4 - C++

Add this to your project file:

CONFIG += console

Solution 5 - C++

What variables do you want to print? If you mean QStrings, those need to be converted to c-Strings. Try:

std::cout << myString.toAscii().data();

Solution 6 - C++

It also has a syntax similar to prinft, e.g.:

qDebug ("message %d, says: %s",num,str);

Very handy as well

Solution 7 - C++

Go the Project's Properties -> Linker-> System -> SubSystem, then set it to Console(/S).

Solution 8 - C++

What about including iostream library and precise that cout is an object of std like this :

#include <iostream>

std::cout << "Hello" << std::endl;

Solution 9 - C++

If you are printing to stderr using the stdio library, a call to fflush(stderr) should flush the buffer and get you real-time logging.

Solution 10 - C++

"build & run" > Default for "Run in terminal" --> Enable

to flush the buffer use this command --> fflush(stdout); you can also use "\n" in printf or cout.

Solution 11 - C++

Well, after studying several examples on the Internet describing how to output messages from a GUI in Qt to stdout, I have refined a working stand-alone example on redirecting messages to a console, via qDebug() and installing qInstallMessageHandler(). The console will be showed at the same time as the GUI and can be hidden if deemed necessary. The code is easy to integrate with existing code in your project. Here is the full sample and feel free to use it in any way as you like, as long as you adhere to the License GNU GPL v2. You have to use a form of some sort and a MainWindow I think - otherwise the sample will run, but probably crash when forced to quit. Note: there is no way to quit via a close button or a menu close because I have tested those alternatives and the application will crash eventually every now and then. Without the close button the application will be stable and you can close it down from the main window. Enjoy!

#include "mainwindow.h"
#include <QApplication>

//GNU GPL V2, 2015-02-07
#include <QMessageBox>
#include <windows.h>
#define CONSOLE_COLUMNS 80
#define CONSOLE_ROWS    5000
#define YOURCONSOLETITLE "Your_Console_Title"

typedef struct{

    CONSOLE_SCREEN_BUFFER_INFOEX conScreenBuffInfoEX;

    HANDLE con_screenbuf;
    HWND hwndConsole;
    HMENU consoleMenu ;
    QString consoleTitle;

    QMessageBox mBox;
    QString localMsg;
    QString errorMessage;
    WINBOOL errorCode;

} consoleT;

static consoleT *console;

BOOL WINAPI catchCTRL( DWORD ctrlMsg ){

        if( ctrlMsg == CTRL_C_EVENT ){

            HWND hwndWin = GetConsoleWindow();
               ShowWindow(hwndWin,SW_FORCEMINIMIZE);
        }

    return TRUE;
}

void removeCloseMenu(){

    int i;

    for( i = 0; i < 10; i++){

        console->hwndConsole = FindWindowW( NULL, console->consoleTitle.toStdWString().data());

        if(console->hwndConsole != NULL)
            break;
    }

    if( !(console->errorCode = 0) && (console->hwndConsole == NULL))
            console->errorMessage += QString("\nFindWindowW error: %1 \n").arg(console->errorCode);

    if( !(console->errorCode = 0) &&  !(console->consoleMenu = GetSystemMenu( console->hwndConsole, FALSE )) )
        console->errorMessage += QString("GetSystemMenu error: %1 \n").arg(console->errorCode);

    if(!(console->errorCode = DeleteMenu( console->consoleMenu, SC_CLOSE, MF_BYCOMMAND )))
           console->errorMessage += QString("DeleteMenu error: %1 \n").arg(console->errorCode);
}

void initialiseConsole(){

    console->conScreenBuffInfoEX.cbSize = sizeof(CONSOLE_SCREEN_BUFFER_INFOEX);
    console->consoleMenu = NULL;
    console->consoleTitle = YOURCONSOLETITLE;
    console->con_screenbuf = INVALID_HANDLE_VALUE;
    console->errorCode = 0;
    console->errorMessage = "";
    console->hwndConsole = NULL;
    console->localMsg = "";

    if(!(console->errorCode = FreeConsole()))
        console->errorMessage += QString("\nFreeConsole error: %1 \n").arg(console->errorCode);

    if(!(console->errorCode = AllocConsole()))
        console->errorMessage += QString("\nAllocConsole error: %1 \n").arg(console->errorCode);

    if( (console->errorCode = -1) && (INVALID_HANDLE_VALUE ==(console->con_screenbuf = CreateConsoleScreenBuffer( GENERIC_WRITE | GENERIC_READ,0, NULL, CONSOLE_TEXTMODE_BUFFER, NULL))))
        console->errorMessage += QString("\nCreateConsoleScreenBuffer error: %1 \n").arg(console->errorCode);

    if(!(console->errorCode = SetConsoleActiveScreenBuffer(console->con_screenbuf)))
        console->errorMessage += QString("\nSetConsoleActiveScreenBuffer error: %1 \n").arg(console->errorCode);

    if(!(console->errorCode = GetConsoleScreenBufferInfoEx(console->con_screenbuf, &console->conScreenBuffInfoEX)))
        console->errorMessage += QString("\nGetConsoleScreenBufferInfoEx error: %1 \n").arg(console->errorCode);

    console->conScreenBuffInfoEX.dwSize.X = CONSOLE_COLUMNS;
    console->conScreenBuffInfoEX.dwSize.Y = CONSOLE_ROWS;

    if(!(console->errorCode = SetConsoleScreenBufferInfoEx(console->con_screenbuf, &console->conScreenBuffInfoEX)))
       console->errorMessage += QString("\nSetConsoleScreenBufferInfoEx error: %1 \n").arg(console->errorCode);

    if(!(console->errorCode = SetConsoleTitleW(console->consoleTitle.toStdWString().data())))
        console->errorMessage += QString("SetConsoleTitle error: %1 \n").arg(console->errorCode);

    SetConsoleCtrlHandler(NULL, FALSE);
    SetConsoleCtrlHandler(catchCTRL, TRUE);

    removeCloseMenu();

    if(console->errorMessage.length() > 0){
        console->mBox.setText(console->errorMessage);
        console->mBox.show();
    }

}

void messageHandler(QtMsgType type, const QMessageLogContext &context, const QString &msg){


    if((console->con_screenbuf != INVALID_HANDLE_VALUE)){

        switch (type) {

        case QtDebugMsg:
            console->localMsg = console->errorMessage + "Debug: " + msg;
            WriteConsoleW(console->con_screenbuf, console->localMsg.toStdWString().data(), console->localMsg.toStdWString().length(), NULL, NULL );
            WriteConsoleA(console->con_screenbuf, "\n--\n", 4, NULL, NULL );
            break;

        case QtWarningMsg:
            console->localMsg = console->errorMessage + "Warning: " + msg;
            WriteConsoleW(console->con_screenbuf, console->localMsg.toStdWString().data(), console->localMsg.toStdWString().length() , NULL, NULL );
            WriteConsoleA(console->con_screenbuf, "\n--\n", 4, NULL, NULL );
            break;

        case QtCriticalMsg:
            console->localMsg = console->errorMessage + "Critical: " + msg;
            WriteConsoleW(console->con_screenbuf, console->localMsg.toStdWString().data(), console->localMsg.toStdWString().length(), NULL, NULL );
            WriteConsoleA(console->con_screenbuf, "\n--\n", 4, NULL, NULL );
            break;

        case QtFatalMsg:
            console->localMsg = console->errorMessage + "Fatal: " + msg;
            WriteConsoleW(console->con_screenbuf, console->localMsg.toStdWString().data(), console->localMsg.toStdWString().length(), NULL, NULL );
            WriteConsoleA(console->con_screenbuf, "\n--\n", 4, NULL, NULL );
            abort();
        }
    }
}



int main(int argc, char *argv[])
{

    qInstallMessageHandler(messageHandler);

    QApplication a(argc, argv);

    console = new consoleT();
    initialiseConsole();

    qDebug() << "Hello World!";

    MainWindow w;
    w.show();

    return a.exec();
}

Content Type	Original Author	Original Content on Stackoverflow
Question	lesolorzanov	View Question on Stackoverflow
Solution 1 - C++	Goz	View Answer on Stackoverflow
Solution 2 - C++	CapelliC	View Answer on Stackoverflow
Solution 3 - C++	Kyle Strand	View Answer on Stackoverflow
Solution 4 - C++	Kyle Lutz	View Answer on Stackoverflow
Solution 5 - C++	Sebastian Negraszus	View Answer on Stackoverflow
Solution 6 - C++	ulitosCoder	View Answer on Stackoverflow
Solution 7 - C++	Son Vu	View Answer on Stackoverflow
Solution 8 - C++	Emerald Cottet	View Answer on Stackoverflow
Solution 9 - C++	Andrew Prock	View Answer on Stackoverflow
Solution 10 - C++	r.shams	View Answer on Stackoverflow
Solution 11 - C++	user2178077	View Answer on Stackoverflow

How to print to console when using Qt

C++ Problem Overview

C++ Solutions

Solution 1 - C++

Solution 2 - C++

Solution 3 - C++

Writing to `stdout`

Writing to `stderr`

Solution 4 - C++

Solution 5 - C++

Solution 6 - C++

Solution 7 - C++

Solution 8 - C++

Solution 9 - C++

Solution 10 - C++

Solution 11 - C++

How can I update window.location.hash without jumping the document?

warning: Insecure world writable dir /usr/local/bin in PATH, mode 040777

Attributions

C++ Problem Overview

C++ Solutions

Solution 1 - C++

Solution 2 - C++

Solution 3 - C++

Writing to stdout

Writing to stderr

Solution 4 - C++

Solution 5 - C++

Solution 6 - C++

Solution 7 - C++

Solution 8 - C++

Solution 9 - C++

Solution 10 - C++

Solution 11 - C++

How can I update window.location.hash without jumping the document?

warning: Insecure world writable dir /usr/local/bin in PATH, mode 040777

Attributions

Writing to `stdout`

Writing to `stderr`