How to make sql-mode="NO_ENGINE_SUBSTITUTION" permanent in MySQL my.cnf
MysqlMysql Problem Overview
UPDATE FIXED 1/18/15
After we recently updated to MySQL 5.6.27 (from the Ubuntu repo), this option now works. So this appears to have been a problem with the previous version of MySQL.
ORIGINAL QUESTION
With a new upgrade to MySQL (5.6.20), updates and inserts fail unless I set sql-mode to NO_ENGINE_SUBSTITUTION.
Thanks to the documentation, I can run the following from mysql terminal and that fixes the problem (temporarily):
SET GLOBAL sql_mode = 'NO_ENGINE_SUBSTITUTION';
SET SESSION sql_mode = 'NO_ENGINE_SUBSTITUTION';`
But the next time MySQL restarts, these settings are lost.
So I have tried to make that permanent by editing /etc/mysql/my.cnf (on my standard server running Ubuntu 12.04.5 LTS), and adding the config settings that the documentation says should be added:
[mysqld]
sql-mode="NO_ENGINE_SUBSTITUTION"
Alternative Syntaxes for Testing
Just for testing purposes, I have also tried the following formats (which do not cause errors when restarting MySQL, but they do not affect the setting).
# dash no quotes
sql-mode=NO_ENGINE_SUBSTITUTION
# underscore no quotes
sql_mode=NO_ENGINE_SUBSTITUTION
# underscore and quotes
sql_mode="NO_ENGINE_SUBSTITUTION"
Nothing works. After restart this setting is lost and I have to run the commands manually again from mysql terminal to make saving work again.
Alternative Locations
- I know /etc/mysql/my.cnf is being referenced because we have replication defined in this file, and that is working.
- There is not another identical setting in this file that is overwriting it.
I get a list of the config files that are being referenced by running this from the command line:
mysqld --help --verbose
I see a line that reads:
Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf /usr/etc/my.cnf ~/.my.cnf
This is the default location it "looks" for files, it doesn't mean that it actually found a file there, e.g. my server doesn't have /etc/my.cnf
, /usr/etc/my.cnf
or ~/.my.cnf
.
So it looks like my config in /etc/mysql/my.cnf is the only file mysql is referencing, and therefore this setting is not being overwritten.
Logical Conclusion of Testing
Logically then, it seems the syntax is not correct or is being ignored for some other reason. Any other ideas?
Mysql Solutions
Solution 1 - Mysql
Just to add my configuration to the mix, I'm using MySQL 5.7.8 which has the same strict sql_mode rules by default.
-
I finally figured the following working in my /etc/mysql/my.conf:
[mysqld] sql-mode="STRICT_TRANS_TABLES,NO_ENGINE_SUBSTITUTION"
i.e. dash, not underscore and quotes around the value.
-
I have NO other my.conf files other than /etc/mysql/my.conf
-
There are some extra config includes being loaded from /etc/mysql/conf.d/ but they are blank.
And that seems to work for me.
Solution 2 - Mysql
Your server may read a different my.cnf
than the one you're editing (unless you specified it when starting mysqld).
From the MySQL Certification Study Guide:
> The search order includes two general option files, /etc/my.cnf
and
> $MYSQL_HOME/my.cnf
. The second file is used only if the MYSQL_HOME
> environment variable is set. Typically, you seet it to the MySQL
> installation directory. (The mysqld_safe script attempts to set
> MYSQL_HOME
if it is not set before starting the server.) The
> option file search order also includes ~/.my.cnf
(that is the home
> directory). This isn't an especially suitable location for server
> options. (Normally, you invoke the server as mysql
, or as root
> with a --user=mysql
option. The user-specific file read by the
> server would depend on which login account you invoke it from,
> possibly leading to inconsistent sets of options being used.)
Another possibility is of course, that your sql-mode
option gets overwritten further down in the same file. Multiple options have to be separated by ,
in the same line.
P.S.: And you need the quotes, IIRC. Now that you've tried it without quotes, I'm pretty sure, you're editing the wrong file, since MySQL doesn't start when there's an error in the option file.
P.P.S.: Had a look at my config files again, there it's
[mysqld]
sql_mode = "NO_ENGINE_SUBSTITUTION"
and it's working.
Solution 3 - Mysql
It should be:
[mysqld]
sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES
instead of
[mysqld]
sql_mode="NO_ENGINE_SUBSTITUTION"
then restart mysqld service.
Solution 4 - Mysql
Woks fine for me on ubuntu 16.04. path: /etc/mysql/mysql.cnf
and paste that
[mysqld]
#
# * Basic Settings
#
sql_mode = "NO_ENGINE_SUBSTITUTION"
Solution 5 - Mysql
For me it was a permission problem.
enter:
mysqld --verbose --help | grep -A 1 "Default options"
[Warning] World-writable config file '/etc/mysql/my.cnf' is ignored.
So try to execute the following, and then restart the server
chmod 644 '/etc/mysql/my.cnf'
It will give mysql access to read and write to the file.
Solution 6 - Mysql
On Linux Mint 18 the default config file that has the sql-mode
option set is located here :
/usr/my.cnf
And relevant line is:
sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES
So You can set there.
If not sure what config file has such option You can search for it:
$ sudo find / -iname "*my.cnf*"
And get a list:
/var/lib/dpkg/alternatives/my.cnf
/usr/my.cnf
/etc/alternatives/my.cnf
/etc/mysql/my.cnf.fallback
/etc/mysql/my.cnf
Solution 7 - Mysql
My problem was that I had spaces in between the options on 5.7.20. Removing them so the line looked like
[mysqld]
sql-mode=STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION
Solution 8 - Mysql
The solution is pretty easy... Searched for it for a while and it turns out that you just have to edit 2 config-files:
/usr/my.cnf
/etc/mysql/my.cnf
in both files you'll have to add:
[mysqld]
...
sql_mode=NO_ENGINE_SUBSTITUTION
At least, that's what's working for 5.6.24-2+deb.sury.org~precise+2
Solution 9 - Mysql
For me both keys for sql-mode
worked. Whether I used
# dash no quotes
sql-mode=NO_ENGINE_SUBSTITUTION
or
# underscore no quotes
sql_mode=NO_ENGINE_SUBSTITUTION
in the my.ini
file made no difference and both were accepted, as far as I could test it.
What actually made a difference was a missing newline at the end of the my.ini
file.
So everyone having problems with this or similar problems with my.ini
/my.cnf
: Make sure there is a blank line at the end of the file!
Tested using MySQL 5.7.27.
Solution 10 - Mysql
If you're using mariadb, you have to modify the mariadb.cnf file located in /etc/mysql/conf.d/.
I supposed the stuff is the same for any other my-sql based solutions.
Solution 11 - Mysql
I am running WHM 10.2.15-MariaDB. To permanently disable strict mode first find out which configuration file our installation prefers. For that, we need the binary’s location:
$ which mysqld
/usr/sbin/mysqld
Then, we use this path to execute the lookup:
$ /usr/sbin/mysqld --verbose --help | grep -A 1 "Default options"
Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf ~/.my.cnf
We can see that the first favored configuration file is one in the root of the etc folder but that there is a second .cnf file hidden - ~/.my.cnf. Adding the following to the ~/.my.cnf file permanently disabled strict mode for me (needs to be within the mysqld section):
[mysqld]
sql_mode=NO_ENGINE_SUBSTITUTION
I found that adding the line to /etc/my.cnf had no effect at all apart from sending me crazy.
Solution 12 - Mysql
It was making me crazy also until I realized that the paragraph where the key must be is [mysqld] not [mysql]
So, for 10.3.22-MariaDB-1ubuntu1, my solution is, in /etc/mysql/conf.d/mysql.cnf
[mysqld]
sql_mode = "ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION"
Solution 13 - Mysql
[Fixed] Server version: 10.1.38-MariaDB - mariadb.org binary distribution
Go to: C:\xampp\mysql\bin open my.ini in notepad and find [mysqld] (line number 27) then after this line(line no 28) just type: skip-grant-tables
save the file and then reload the phpmyadmin page.It worked for me.