How to hide command output in Bash

Bash Problem Overview

I want to make my Bash scripts more elegant for the end user. How do I hide the output when Bash is executing commands?

For example, when Bash executes

yum install nano

The following will show up to the user who executed the Bash:

Loaded plugins: fastestmirror
base                                                     | 3.7 kB     00:00
base/primary_db                                          | 4.4 MB     00:03
extras                                                   | 3.4 kB     00:00
extras/primary_db                                        |  18 kB     00:00
updates                                                  | 3.4 kB     00:00
updates/primary_db                                       | 3.8 MB     00:02
Setting up Install Process
Resolving Dependencies
--> Running transaction check
---> Package nano.x86_64 0:2.0.9-7.el6 will be installed
--> Finished Dependency Resolution

Dependencies Resolved

================================================================================
 Package         Arch              Version                Repository       Size
================================================================================
Installing:
 nano            x86_64            2.0.9-7.el6            base            436 k

Transaction Summary
================================================================================
Install       1 Package(s)

Total download size: 436 k
Installed size: 1.5 M
Downloading Packages:
nano-2.0.9-7.el6.x86_64.rpm                              | 436 kB     00:00
warning: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID c105b9de: NOKEY
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
Importing GPG key 0xC105B9DE:
 Userid : CentOS-6 Key (CentOS 6 Official Signing Key) <[email protected]>
 Package: centos-release-6-4.el6.centos.10.x86_64 (@anaconda-CentOS-201303020151.x86_64/6.4)
 From   : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
Running rpm_check_debug
Running Transaction Test
Transaction Test Succeeded
Running Transaction
  Installing : nano-2.0.9-7.el6.x86_64                                      1/1
  Verifying  : nano-2.0.9-7.el6.x86_64                                      1/1

Installed:
  nano.x86_64 0:2.0.9-7.el6

Complete!

Now I want to hide this from the user and instead show:

    Installing nano ......

How can I accomplish this task? I will definitely help to make the script more user friendly. In case an error occurs then it should be shown to the user.

I would like to know how to show same message while a set of commands are being executed.

Bash Solutions

Solution 1 - Bash

Use this.

{
  /your/first/command
  /your/second/command
} &> /dev/null

Explanation

To eliminate output from commands, you have two options:

Close the output descriptor file, which keeps it from accepting any more input. That looks like this:
```
your_command "Is anybody listening?" >&-
```
Usually, output goes either to file descriptor 1 (stdout) or 2 (stderr). If you close a file descriptor, you'll have to do so for every numbered descriptor, as &> (below) is a special BASH syntax incompatible with >&-:
```
/your/first/command >&- 2>&-
```
Be careful to note the order: >&- closes stdout, which is what you want to do; &>- redirects stdout and stderr to a file named - (hyphen), which is not what what you want to do. It'll look the same at first, but the latter creates a stray file in your working directory. It's easy to remember: >&2 redirects stdout to descriptor 2 (stderr), >&3 redirects stdout to descriptor 3, and >&- redirects stdout to a dead end (i.e. it closes stdout).

Also beware that some commands may not handle a closed file descriptor particularly well ("write error: Bad file descriptor"), which is why the better solution may be to...
Redirect output to /dev/null, which accepts all output and does nothing with it. It looks like this:
```
your_command "Hello?" > /dev/null
```
For output redirection to a file, you can direct both stdout and stderr to the same place very concisely, but only in bash:
```
/your/first/command &> /dev/null
```

Finally, to do the same for a number of commands at once, surround the whole thing in curly braces. Bash treats this as a group of commands, aggregating the output file descriptors so you can redirect all at once. If you're familiar instead with subshells using ( command1; command2; ) syntax, you'll find the braces behave almost exactly the same way, except that unless you involve them in a pipe the braces will not create a subshell and thus will allow you to set variables inside.

{
  /your/first/command
  /your/second/command
} &> /dev/null

See the bash manual on redirections for more details, options, and syntax.

Solution 2 - Bash

You can redirect stdout to /dev/null.

yum install nano > /dev/null

Or you can redirect both stdout and stderr,

yum install nano &> /dev/null.

But if the program has a quiet option, that's even better.

Solution 3 - Bash

A process normally has two outputs to screen: stdout (standard out), and stderr (standard error).

Normally informational messages go to sdout, and errors and alerts go to stderr.

You can turn off stdout for a command by doing

MyCommand >/dev/null

and turn off stderr by doing:

MyCommand 2>/dev/null

If you want both off, you can do:

MyCommand 2>&1 >/dev/null

The 2>&1 says send stderr to the same place as stdout.

Solution 4 - Bash

You can redirect the output to /dev/null. For more info regarding /dev/null read this link.

You can hide the output of a comand in the following ways :

echo -n "Installing nano ......"; yum install nano > /dev/null; echo " done.";

Redirect the standard output to /dev/null, but not the standard error. This will show the errors occurring during the installation, for example if yum cannot find a package.

echo -n "Installing nano ......"; yum install nano &> /dev/null; echo " done.";

While this code will not show anything in the terminal since both standard error and standard output are redirected and thus nullified to /dev/null.

Solution 5 - Bash

>/dev/null 2>&1 will mute both stdout and stderr

yum install nano >/dev/null 2>&1

Solution 6 - Bash

You should not use bash in this case to get rid of the output. Yum does have an option -q which suppresses the output.

You'll most certainly also want to use -y

echo "Installing nano..."
yum -y -q install nano

To see all the options for yum, use man yum.

Solution 7 - Bash

.SILENT:

Type " .SILENT: " in the beginning of your script without colons.

Solution 8 - Bash

you can also do it by assigning its output to a variable, this is particularly useful when you don't have /dev/null.

Yes, I came across a situation when I can't use /dev/null.

The solution I found was to assign the output to a variable which I will never use there after:

hide_output=$([[ -d /proc ]] && [[ mountpoint -q /proc ]] && umount -l /proc)

Solution 9 - Bash

This: command > /dev/null Or this: (to suppress errors as well) command > /dev/null 2>&1

Similar to lots of other answers but they didn't work for me with 2> being in front of dev/null.

Content Type	Original Author	Original Content on Stackoverflow
Question	user2650277	View Question on Stackoverflow
Solution 1 - Bash	Jeff Bowman	View Answer on Stackoverflow
Solution 2 - Bash	ktm5124	View Answer on Stackoverflow
Solution 3 - Bash	LeOn - Han Li	View Answer on Stackoverflow
Solution 4 - Bash	Giuseppe Pes	View Answer on Stackoverflow
Solution 5 - Bash	Quanlong	View Answer on Stackoverflow
Solution 6 - Bash	kkeller	View Answer on Stackoverflow
Solution 7 - Bash	Arif	View Answer on Stackoverflow
Solution 8 - Bash	DeanSinaean	View Answer on Stackoverflow
Solution 9 - Bash	Brad	View Answer on Stackoverflow