How to apply color in Markdown?

I want to use Markdown to store textual information. But quick googling says Markdown does not support color. Also StackOverflow does not support color. Same as in case of GitHub markdown.

Is there any flavor of markdown that allows colored text?

TL;DR

Markdown doesn't support color but you can inline HTML inside Markdown, e.g.:

<span style="color:blue">some *blue* text</span>.

Longer answer

As the original/official syntax rules state (emphasis added):

> Markdown’s syntax is intended for one purpose: to be used as a format for writing for the web. > > Markdown is not a replacement for HTML, or even close to it. Its syntax is very small, corresponding only to a very small subset of HTML tags. The idea is not to create a syntax that makes it easier to insert HTML tags. In my opinion, HTML tags are already easy to insert. The idea for Markdown is to make it easy to read, write, and edit prose. HTML is a publishing format; Markdown is a writing format. Thus, Markdown’s formatting syntax only addresses issues that can be conveyed in plain text. > > For any markup that is not covered by Markdown’s syntax, you simply use HTML itself.

As it is not a "publishing format," providing a way to color your text is out-of-scope for Markdown. That said, it is not impossible as you can include raw HTML (and HTML is a publishing format). For example, the following Markdown text (as suggested by @scoa in a comment):

Some Markdown text with <span style="color:blue">some *blue* text</span>.

Would result in the following HTML:

<p>Some Markdown text with <span style="color:blue">some <em>blue</em> text</span>.</p>

Now, StackOverflow (and probably GitHub) will strip the raw HTML out (as a security measure) so you lose the color here, but it should work on any standard Markdown implementation.

Another possibility is to use the non-standard Attribute Lists originally introduced by the Markuru implementation of Markdown and later adopted by a few others (there may be more, or slightly different implementations of the same idea, like div and span attributes in pandoc). In that case, you could assign a class to a paragraph or inline element, and then use CSS to define a color for a class. However, you absolutely must be using one of the few implementations which actually support the non-standard feature and your documents are no longer portable to other systems.

When you want to use pure Markdown (without nested HTML), you can use Emojis to draw attention to some fragment of the file, i.e. ⚠️WARNING⚠️, IMPORTANT❗ or NEW.

I have started using Markdown to post some of my documents to an internal web site for in-house users. It is an easy way to have a document shared but not able to be edited by the viewer.

So, this marking of text in color is “Great”. I have use several like this and works wonderful.

<span style="color:blue">some *This is Blue italic.* text</span>

Turns into This is Blue italic.

And

<span style="color:red">some **This is Red Bold.** text</span>

Turns into This is Red Bold.

I love the flexibility and ease of use.

While Markdown doesn't support color, if you don't need too many, you could always sacrifice some of the supported styles and redefine the related tag using CSS to make it color, and also remove the formatting, or not.

Example:

// resets
s { text-decoration:none; } //strike-through
em { font-style: normal; font-weight: bold; } //italic emphasis


// colors
s { color: green }
em { color: blue }

See also: https://stackoverflow.com/questions/25535836/how-to-restyle-em-tag-to-be-bold-instead-of-italic

Then in your markdown text

~~This is green~~
_this is blue_

This should be shorter:

<font color='red'>test blue color font</font>

I like the idea of redefining existing tags if they're unused due to the fact that the text is cleaner, at the expense of existing tags. The inline styling works but creates a lot of noise when reading the raw text.

Using VSCode I've found that custom single-letter tags, supported by a small <style> section at the top, works well with a minimum of noise, especially for spot colour, e.g.

<style>
r { color: Red }
o { color: Orange }
g { color: Green }
</style>

# TODOs:

- <r>TODO:</r> Important thing to do
- <o>TODO:</o> Less important thing to do
- <g>DONE:</g> Breath deeply and improve karma

My use-case is orgmode-ish in-app note taking during development but I guess it might work elsewhere?

you can probably use the latex style:

$\color{color-code}{your-text-here}$

To keep the whitespace between words, you also need to include the tilde ~.

In Jekyll I was able to add some color or other styles to a bold element (should work with all other elements as well).

I started the "styling" with {: and end it }. There is no space allowed between element and curly bracket!

**My Bold Text, in red color.**{: style="color: red; opacity: 0.80;" }

Will be translated to html:

<strong style="color: red; opacity: 0.80;">My Bold Text, in red color.</strong>

As an alternative, whatever purpose colour serves in your text may be achieved with coloured Unicode characters, such as , U+1F534 'large red circle'.

For example, I use characters like this when I document wire colours, when hardware accompanies my software projects on GitHub.

🔴 red: +5V
🟠 orange: +3.3V
⚫ black: ground
⚪ white: ground (pull-down)
🟣 purple: I2C signal
🟢 green: clock signal
🟡 yellow: WS2812 signal
🔵 blue: resistor bridge (analogue) input

Maybe this would be useful for your documentation, too. You can copy and paste this example into your text, or websearch for strings like 'unicode purple square'. They're also considered emoji.

Seems that kramdown supports colors in some form.

Kramdown allows inline html:

This is <span style="color: red">written in red</span>.

Also it has another syntax for including css classes inline:

This is *red*{: style="color: red"}.

This page further explains how GitLab utilizes more compact way to apply css classes in Kramdown:

> Applying blue class to text:

> This is a paragraph that for some reason we want blue. {: .blue}

> Applying blue class to headings:

> #### A blue heading {: .blue}

> Applying two classes:

> A blue and bold paragraph. {: .blue .bold}

> Applying ids:

> #### A blue heading {: .blue #blue-h}

> This produces:

>

A blue heading

There is a lot of other stuff explained at above link. You may need to check.

Also, as other answer said, Kramdown is also the default markdown renderer behind Jekyll. So if you are authoring anything on github pages, above functionality might be available out of the box.

Short story: links. Make use of something like:

a[href='red'] {
    color: red;
    pointer-events: none;
    cursor: default;
    text-decoration: none;
}

<a href="red">Look, ma! Red!</a>

(HTML above for demonstration purposes)

And in your md source:

[Look, ma! Red!](red)

This works in the note-taking Joplin:

<span style="color:red">text in red</span>

Run the following in zeppelin paragraph

%md ### <span style="color:red">text</span>

I've had success with

<span class="someclass"></span>

Caveat : the class must already exist on the site.

Put in the RMarkdown header this command

header-includes: \usepackage{xcolor}

and then use this command to color your text

\textcolor{green}{Text is green!}

Pain in the butt.

Markdown to PDF via pandoc worked for me only when using:

---
header-includes: 
                 \usepackage{xcolor}
                 \definecolor{alizarin}{rgb}{0.82, 0.1, 0.26}
---

\color{alizarin}The overarching aim \color{black} of this project is

"The overarching aim" in red - the rest in black. Font stays the same and no trouble with spaces.

Exporting to odt or docx - no luck.

Please use the below syntax to get the BOLD & Font Color as Red

__`A`__