How to add a progress bar to a shell script?
BashShellZshBash Problem Overview
When scripting in bash or any other shell in *NIX, while running a command that will take more than a few seconds, a progress bar is needed.
For example, copying a big file, opening a big tar file.
What ways do you recommend to add progress bars to shell scripts?
Bash Solutions
Solution 1 - Bash
You can implement this by overwriting a line. Use \r
to go back to the beginning of the line without writing \n
to the terminal.
Write \n
when you're done to advance the line.
Use echo -ne
to:
- not print
\n
and - to recognize escape sequences like
\r
.
Here's a demo:
echo -ne '##### (33%)\r'
sleep 1
echo -ne '############# (66%)\r'
sleep 1
echo -ne '####################### (100%)\r'
echo -ne '\n'
In a comment below, puk mentions this "fails" if you start with a long line and then want to write a short line: In this case, you'll need to overwrite the length of the long line (e.g., with spaces).
Solution 2 - Bash
You may also be interested in how to do a spinner:
Can I do a spinner in Bash?
> Sure!
>
> i=1
> sp="/-|"
> echo -n ' '
> while true
> do
> printf "\b${sp:i++%${#sp}:1}"
> done
>
> Each time the loop iterates, it displays the next character in the sp
> string, wrapping around as it reaches the end. (i is the position of
> the current character to display and ${#sp} is the length of the sp
> string).
>
> The \b string is replaced by a 'backspace' character. Alternatively,
> you could play with \r to go back to the beginning of the line.
>
> If you want it to slow down, put a sleep command inside the loop
> (after the printf).
>
> A POSIX equivalent would be:
>
> sp='/-|'
> printf ' '
> while true; do
> printf '\b%.1s' "$sp"
> sp=${sp#?}${sp%???}
> done
>
> If you already have a loop which does a lot of work, you can call the
> following function at the beginning of each iteration to update the
> spinner:
>
> sp="/-|"
> sc=0
> spin() {
> printf "\b${sp:sc++:1}"
> ((sc==${#sp})) && sc=0
> }
> endspin() {
> printf "\r%s\n" "$@"
> }
>
> until work_done; do
> spin
> some_work ...
> done
> endspin
Solution 3 - Bash
Got an easy progress bar function that i wrote the other day:
#!/bin/bash
# 1. Create ProgressBar function
# 1.1 Input is currentState($1) and totalState($2)
function ProgressBar {
# Process data
let _progress=(${1}*100/${2}*100)/100
let _done=(${_progress}*4)/10
let _left=40-$_done
# Build progressbar string lengths
_fill=$(printf "%${_done}s")
_empty=$(printf "%${_left}s")
# 1.2 Build progressbar strings and print the ProgressBar line
# 1.2.1 Output example:
# 1.2.1.1 Progress : [########################################] 100%
printf "\rProgress : [${_fill// /#}${_empty// /-}] ${_progress}%%"
}
# Variables
_start=1
# This accounts as the "totalState" variable for the ProgressBar function
_end=100
# Proof of concept
for number in $(seq ${_start} ${_end})
do
sleep 0.1
ProgressBar ${number} ${_end}
done
printf '\nFinished!\n'
Or snag it from,
https://github.com/fearside/ProgressBar/
Solution 4 - Bash
Use the Linux command pv
.
It doesn't know the size if it's in the middle of the pipeline, but it gives a speed and total, and from there you can figure out how long it should take and get feedback so you know it hasn't hung.
Solution 5 - Bash
Some posts have showed how to display the command's progress. In order to calculate it, you'll need to see how much you've progressed. On BSD systems some commands, such as dd(1), accept a SIGINFO
signal, and will report their progress. On Linux systems some commands will respond similarly to SIGUSR1
. If this facility is available, you can pipe your input through dd
to monitor the number of bytes processed.
Alternatively, you can use lsof
to obtain the offset of the file's read pointer, and thereby calculate the progress. I've written a command, named pmonitor, that displays the progress of processing a specified process or file. With it you can do things, such as the following.
$ pmonitor -c gzip
/home/dds/data/mysql-2015-04-01.sql.gz 58.06%
An earlier version of Linux and FreeBSD shell scripts appears on my blog ("Monitor Process Progress on Unix").
Solution 6 - Bash
I was looking for something more sexy than the selected answer, so did my own script.
Preview
Source
I put it on github progress-bar.sh
progress-bar() {
local duration=${1}
already_done() { for ((done=0; done<$elapsed; done++)); do printf "▇"; done }
remaining() { for ((remain=$elapsed; remain<$duration; remain++)); do printf " "; done }
percentage() { printf "| %s%%" $(( (($elapsed)*100)/($duration)*100/100 )); }
clean_line() { printf "\r"; }
for (( elapsed=1; elapsed<=$duration; elapsed++ )); do
already_done; remaining; percentage
sleep 1
clean_line
done
clean_line
}
Usage
progress-bar 100
Solution 7 - Bash
Haven't seen anything similar and all custom functions here seem to focus on rendering alone so... my very simple POSIX compliant solution below with step by step explanations because this question isn't trivial.
TL;DR
Rendering the progress bar is very easy. Estimating how much of it should render is a different matter. This is how to render (animate) the progress bar - you can copy&paste this example to a file and run it:
#!/bin/sh
BAR='####################' # this is full bar, e.g. 20 chars
for i in {1..20}; do
echo -ne "\r${BAR:0:$i}" # print $i chars of $BAR from 0 position
sleep .1 # wait 100ms between "frames"
done
{1..20}
- values from 1 to 20echo
- print to terminal (i.e. tostdout
)echo -n
- print without new line at the endecho -e
- interpret special characters while printing"\r"
- carriage return, a special char to return to the beginning of the line
You can make it render any content at any speed so this method is very universal, e.g. often used for visualization of "hacking" in silly movies, no kidding.
Full answer (from zero to working example)
The meat of the problem is how to determine the $i
value, i.e. how much of the progress bar to display. In the above example I just let it increment in for
loop to illustrate the principle but a real life application would use an infinite loop and calculate the $i
variable on each iteration. To make said calculation it needs the following ingredients:
- how much work there is to be done
- how much work has been done so far
In case of cp
it needs the size of a source file and the size of the target file:
#!/bin/sh
src="/path/to/source/file"
tgt="/path/to/target/file"
cp "$src" "$tgt" & # the & forks the `cp` process so the rest
# of the code runs without waiting (async)
BAR='####################'
src_size=$(stat -c%s "$src") # how much there is to do
while true; do
tgt_size=$(stat -c%s "$tgt") # how much has been done so far
i=$(( $tgt_size * 20 / $src_size ))
echo -ne "\r${BAR:0:$i}"
if [ $tgt_size == $src_size ]; then
echo "" # add a new line at the end
break; # break the loop
fi
sleep .1
done
foo=$(bar)
- runbar
in a subprocess and save itsstdout
to$foo
stat
- print file stats tostdout
stat -c
- print a formatted value%s
- format for total size
In case of operations like file unpacking, calculating the source size is slightly more difficult but still as easy as getting the size of an uncompressed file:
#!/bin/sh
src_size=$(gzip -l "$src" | tail -n1 | tr -s ' ' | cut -d' ' -f3)
gzip -l
- print info about zip archivetail -n1
- work with 1 line from the bottomtr -s ' '
- translate multiple spaces into one ("squeeze" them)cut -d' ' -f3
- cut 3rd space-delimited field (column)
Here's the meat of the problem I mentioned before. This solution is less and less general. All calculations of the actual progress are tightly bound to the domain you're trying to visualize, is it a single file operation, a timer countdown, a rising number of files in a directory, operation on multiple files, etc., therefore, it can't be reused. The only reusable part is progress bar rendering. To reuse it you need to abstract it and save in a file (e.g. /usr/lib/progress_bar.sh
), then define functions that calculate input values specific to your domain. This is how a generalized code could look like (I also made the $BAR
dynamic because people were asking for it, the rest should be clear by now):
#!/bin/bash
BAR_length=50
BAR_character='#'
BAR=$(printf %${BAR_length}s | tr ' ' $BAR_character)
work_todo=$(get_work_todo) # how much there is to do
while true; do
work_done=$(get_work_done) # how much has been done so far
i=$(( $work_done * $BAR_length / $work_todo ))
echo -ne "\r${BAR:0:$i}"
if [ $work_done == $work_todo ]; then
echo ""
break;
fi
sleep .1
done
printf
- a builtin for printing stuff in a given formatprintf %50s
- print nothing but pad it with 50 spacestr ' ' '#'
- translate every space to hash sign
And this is how you'd use it:
#!/bin/bash
src="/path/to/source/file"
tgt="/path/to/target/file"
function get_work_todo() {
echo $(stat -c%s "$src")
}
function get_work_done() {
[ -e "$tgt" ] && # if target file exists
echo $(stat -c%s "$tgt") || # echo its size, else
echo 0 # echo zero
}
cp "$src" "$tgt" & # copy in the background
source /usr/lib/progress_bar.sh # execute the progress bar
Obviously you can wrap this in a function, rewrite to work with piped streams, grab forked process ID with $!
and pass it to progress_bar.sh
so it could guess how to calculate work to do and work done, whatever's your poison.
Side notes
I get asked about these two things most often:
${}
: in above examples I use${foo:A:B}
. The technical term for this syntax is Parameter Expansion, a built-in shell functionality that allows to manipulate a variable (parameter), e.g. to trim a string with:
but also to do other things - it does not spawn a subshell. The most prominent description of parameter expansion I can think of (that isn't fully POSIX compatible but lets the reader understand the concept well) is in theman bash
page.$()
: in above examples I usefoo=$(bar)
. It spawns a separate shell in a subprocess (a.k.a. a Subshell), runs thebar
command in it and assigns its standard output to a$foo
variable. It's not the same as Process Substitution and it's something entirely different than pipe (|
). Most importantly, it works. Some say this should be avoided because it's slow. I argue this is "a okay" here because whatever this code is trying to visualise lasts long enough to require a progress bar. In other words, subshells are not the bottleneck. Calling a subshell also saves me the effort of explaining whyreturn
isn't what most people think it is, what is an Exit Status and why passing values from functions in shells is not what shell functions are good at in general. To find out more about all of it I, again, highly recommend theman bash
page.
Troubleshooting
If your shell is actually running sh instead of bash, or really old bash, like default osx, it may choke on echo -ne "\r${BAR:0:$i}"
. The exact error is Bad substitution
. If this happens to you, per the comment section, you can instead use echo -ne "\r$(expr "x$name" : "x.\{0,$num_skip\}\(.\{0,$num_keep\}\)")"
to do a more portable posix-compatible / less readable substring match.
A complete, working /bin/sh example:
#!/bin/sh
src=100
tgt=0
get_work_todo() {
echo $src
}
do_work() {
echo "$(( $1 + 1 ))"
}
BAR_length=50
BAR_character='#'
BAR=$(printf %${BAR_length}s | tr ' ' $BAR_character)
work_todo=$(get_work_todo) # how much there is to do
work_done=0
while true; do
work_done="$(do_work $work_done)"
i=$(( $work_done * $BAR_length / $work_todo ))
n=$(( $BAR_length - $i ))
printf "\r$(expr "x$BAR" : "x.\{0,$n\}\(.\{0,$i\}\)")"
if [ $work_done = $work_todo ]; then
echo "\n"
break;
fi
sleep .1
done
Solution 8 - Bash
GNU tar has a useful option which gives a functionality of a simple progress bar.
(...) Another available checkpoint action is ‘dot’ (or ‘.’). It instructs tar to print a single dot on the standard listing stream, e.g.:
$ tar -c --checkpoint=1000 --checkpoint-action=dot /var
...
The same effect may be obtained by:
$ tar -c --checkpoint=.1000 /var
Solution 9 - Bash
APT style progress bar (Does not break normal output)
EDIT: For an updated version check my github page
I was not satisfied with the responses on this question. What I was personally looking for was a fancy progress bar as is seen by APT.
I had a look at the C source code for APT and decided to write my own equivalent for bash.
This progress bar will stay nicely at the bottom of the terminal and will not interfere with any output sent to the terminal.
Please do note that the bar is currently fixed at 100 characters wide. If you want scale it to the size of the terminal, this is fairly easy to accomplish as well (The updated version on my github page handles this well).
I will post my script here. Usage example:
source ./progress_bar.sh
echo "This is some output"
setup_scroll_area
sleep 1
echo "This is some output 2"
draw_progress_bar 10
sleep 1
echo "This is some output 3"
draw_progress_bar 50
sleep 1
echo "This is some output 4"
draw_progress_bar 90
sleep 1
echo "This is some output 5"
destroy_scroll_area
The script (I strongly recommend the version on my github instead):
#!/bin/bash
# This code was inspired by the open source C code of the APT progress bar
# http://bazaar.launchpad.net/~ubuntu-branches/ubuntu/trusty/apt/trusty/view/head:/apt-pkg/install-progress.cc#L233
#
# Usage:
# Source this script
# setup_scroll_area
# draw_progress_bar 10
# draw_progress_bar 90
# destroy_scroll_area
#
CODE_SAVE_CURSOR="\033[s"
CODE_RESTORE_CURSOR="\033[u"
CODE_CURSOR_IN_SCROLL_AREA="\033[1A"
COLOR_FG="\e[30m"
COLOR_BG="\e[42m"
RESTORE_FG="\e[39m"
RESTORE_BG="\e[49m"
function setup_scroll_area() {
lines=$(tput lines)
let lines=$lines-1
# Scroll down a bit to avoid visual glitch when the screen area shrinks by one row
echo -en "\n"
# Save cursor
echo -en "$CODE_SAVE_CURSOR"
# Set scroll region (this will place the cursor in the top left)
echo -en "\033[0;${lines}r"
# Restore cursor but ensure its inside the scrolling area
echo -en "$CODE_RESTORE_CURSOR"
echo -en "$CODE_CURSOR_IN_SCROLL_AREA"
# Start empty progress bar
draw_progress_bar 0
}
function destroy_scroll_area() {
lines=$(tput lines)
# Save cursor
echo -en "$CODE_SAVE_CURSOR"
# Set scroll region (this will place the cursor in the top left)
echo -en "\033[0;${lines}r"
# Restore cursor but ensure its inside the scrolling area
echo -en "$CODE_RESTORE_CURSOR"
echo -en "$CODE_CURSOR_IN_SCROLL_AREA"
# We are done so clear the scroll bar
clear_progress_bar
# Scroll down a bit to avoid visual glitch when the screen area grows by one row
echo -en "\n\n"
}
function draw_progress_bar() {
percentage=$1
lines=$(tput lines)
let lines=$lines
# Save cursor
echo -en "$CODE_SAVE_CURSOR"
# Move cursor position to last row
echo -en "\033[${lines};0f"
# Clear progress bar
tput el
# Draw progress bar
print_bar_text $percentage
# Restore cursor position
echo -en "$CODE_RESTORE_CURSOR"
}
function clear_progress_bar() {
lines=$(tput lines)
let lines=$lines
# Save cursor
echo -en "$CODE_SAVE_CURSOR"
# Move cursor position to last row
echo -en "\033[${lines};0f"
# clear progress bar
tput el
# Restore cursor position
echo -en "$CODE_RESTORE_CURSOR"
}
function print_bar_text() {
local percentage=$1
# Prepare progress bar
let remainder=100-$percentage
progress_bar=$(echo -ne "["; echo -en "${COLOR_FG}${COLOR_BG}"; printf_new "#" $percentage; echo -en "${RESTORE_FG}${RESTORE_BG}"; printf_new "." $remainder; echo -ne "]");
# Print progress bar
if [ $1 -gt 99 ]
then
echo -ne "${progress_bar}"
else
echo -ne "${progress_bar}"
fi
}
printf_new() {
str=$1
num=$2
v=$(printf "%-${num}s" "$str")
echo -ne "${v// /$str}"
}
Solution 10 - Bash
I would also like to contribute my own progress bar
It achieves sub-character precision by using Half unicode blocks
Code is included
Solution 11 - Bash
A simpler method that works on my system using the pipeview ( pv ) utility.
srcdir=$1
outfile=$2
tar -Ocf - $srcdir | pv -i 1 -w 50 -berps `du -bs $srcdir | awk '{print $1}'` | 7za a -si $outfile
Solution 12 - Bash
This lets you visualize that a command is still executing:
while :;do echo -n .;sleep 1;done &
trap "kill $!" EXIT #Die with parent if we die prematurely
tar zxf packages.tar.gz; # or any other command here
kill $! && trap " " EXIT #Kill the loop and unset the trap or else the pid might get reassigned and we might end up killing a completely different process
This will create an infinite while loop that executes in the background and echoes a "." every second. This will display .
in the shell. Run the tar
command or any a command you want. When that command finishes executing then kill the last job running in the background - which is the infinite while loop.
Solution 13 - Bash
Here is how it might look
Uploading a file
[##################################################] 100% (137921 / 137921 bytes)
Waiting for a job to complete
[######################### ] 50% (15 / 30 seconds)
Simple function that implements it
You can just copy-paste it to your script. It does not require anything else to work.
PROGRESS_BAR_WIDTH=50 # progress bar length in characters
draw_progress_bar() {
# Arguments: current value, max value, unit of measurement (optional)
local __value=$1
local __max=$2
local __unit=${3:-""} # if unit is not supplied, do not display it
# Calculate percentage
if (( $__max < 1 )); then __max=1; fi # anti zero division protection
local __percentage=$(( 100 - ($__max*100 - $__value*100) / $__max ))
# Rescale the bar according to the progress bar width
local __num_bar=$(( $__percentage * $PROGRESS_BAR_WIDTH / 100 ))
# Draw progress bar
printf "["
for b in $(seq 1 $__num_bar); do printf "#"; done
for s in $(seq 1 $(( $PROGRESS_BAR_WIDTH - $__num_bar ))); do printf " "; done
printf "] $__percentage%% ($__value / $__max $__unit)\r"
}
Usage example
Here, we upload a file and redraw the progress bar at each iteration. It does not matter what job is actually performed as long as we can get 2 values: max value and current value.
In the example below the max value is file_size
and the current value is supplied by some function and is called uploaded_bytes
.
# Uploading a file
file_size=137921
while true; do
# Get current value of uploaded bytes
uploaded_bytes=$(some_function_that_reports_progress)
# Draw a progress bar
draw_progress_bar $uploaded_bytes $file_size "bytes"
# Check if we reached 100%
if [ $uploaded_bytes == $file_size ]; then break; fi
sleep 1 # Wait before redrawing
done
# Go to the newline at the end of upload
printf "\n"
Solution 14 - Bash
Hires (floating point) progress bar
Preamble
Sorry for this not so short answer.
For impatients: Please test code at Now do it! (in the middle), with Last animated demo (near end of this.) and Practical sample (at end).
All demos here use read -t <float seconds> && break
instead of sleep
. So all loop could be nicely stopped by hitting Return key.
Introduction
Yet Another Bash Progress Bar...
As there is already a lot of answer here, I want to add some hints about performances and precision.
1. Avoid forks!
Because a progress bar are intented to run while other process are working, this must be a nice process...
So avoid using forks when not needed. Sample: instead of
mysmiley=$(printf '%b' \\U1F60E)
Use
printf -v mysmiley '%b' \\U1F60E
Explanation: When you run var=$(command)
, you initiate a new process to execute command
and send his output to variable $var
once terminated. This is very resource expensive. Please compare:
TIMEFORMAT="%R"
time for ((i=2500;i--;)){ mysmiley=$(printf '%b' \\U1F60E);}
2.292
time for ((i=2500;i--;)){ printf -v mysmiley '%b' \\U1F60E;}
0.017
bc -l <<<'2.292/.017'
134.82352941176470588235
On my host, same work of assigning $mysmiley
(just 2500 time), seem ~135x slower / more expensive by using fork than by using built-in printf -v
.
Then
echo $mysmiley
😎
So your function
have to not print (or output) anything. Your function have to attribute his answer to a variable.
2. Use integer as pseudo floating point
Here is a very small and quick function to compute percents from integers, with integer and answer a pseudo floating point number:
percent(){
local p=00$(($1*100000/$2))
printf -v "$3" %.2f ${p::-3}.${p: -3}
}
Usage:
# percent <integer to compare> <reference integer> <variable name>
percent 33333 50000 testvar
printf '%8s%%\n' "$testvar"
66.67%
▏ ▎ ▍ ▌ ▋ ▊ ▉ █
3. Hires console graphic using UTF-8: To render this characters using bash, you could:
printf -v chars '\\U258%X ' {15..8}
printf "$chars\\n"
▏ ▎ ▍ ▌ ▋ ▊ ▉ █
Then we have to use 8x string with
as graphic width
.
Now do it!
This function is named percentBar
because it render a bar from argument submited in percents (floating):
percentBar () {
local prct totlen=$((8*$2)) lastchar barstring blankstring;
printf -v prct %.2f "$1"
((prct=10#${prct/.}*totlen/10000, prct%8)) &&
printf -v lastchar '\\U258%X' $(( 16 - prct%8 )) ||
lastchar=''
printf -v barstring '%*s' $((prct/8)) ''
printf -v barstring '%b' "${barstring// /\\U2588}$lastchar"
printf -v blankstring '%*s' $(((totlen-prct)/8)) ''
printf -v "$3" '%s%s' "$barstring" "$blankstring"
}
Usage:
# percentBar <float percent> <int string width> <variable name>
percentBar 42.42 $COLUMNS bar1
echo "$bar1"
█████████████████████████████████▉
To show little differences:
percentBar 42.24 $COLUMNS bar2
printf "%s\n" "$bar1" "$bar2"
█████████████████████████████████▉
█████████████████████████████████▊
With colors
As rendered variable is a fixed widht string, using color is easy:
percentBar 72.1 24 bar
printf 'Show this: \e[44;33;1m%s\e[0m at %s%%\n' "$bar" 72.1
Little animation:
for i in {0..10000..33} 10000;do i=0$i
printf -v p %0.2f ${i::-2}.${i: -2}
percentBar $p $((COLUMNS-9)) bar
printf '\r|%s|%6.2f%%' "$bar" $p
read -srt .002 _ && break # console sleep avoiding fork
done
|███████████████████████████████████████████████████████████████████████|100.00%
clear; for i in {0..10000..33} 10000;do i=0$i
printf -v p %0.2f ${i::-2}.${i: -2}
percentBar $p $((COLUMNS-7)) bar
printf '\r\e[47;30m%s\e[0m%6.2f%%' "$bar" $p
read -srt .002 _ && break
done
Last animated demo
Another demo showing different sizes and colored output:
printf '\n\n\n\n\n\n\n\n\e[8A\e7'&&for i in {0..9999..99} 10000;do
o=1 i=0$i;printf -v p %0.2f ${i::-2}.${i: -2}
for l in 1 2 3 5 8 13 20 40 $((COLUMNS-7));do
percentBar $p $l bar$((o++));done
[ "$p" = "100.00" ] && read -rst .8 _;printf \\e8
printf '%s\e[48;5;23;38;5;41m%s\e[0m%6.2f%%%b' 'In 1 char width: ' \
"$bar1" $p ,\\n 'with 2 chars: ' "$bar2" $p ,\\n 'or 3 chars: ' \
"$bar3" $p ,\\n 'in 5 characters: ' "$bar4" $p ,\\n 'in 8 chars: ' \
"$bar5" $p .\\n 'There are 13 chars: ' "$bar6" $p ,\\n '20 chars: '\
"$bar7" $p ,\\n 'then 40 chars' "$bar8" $p \
', or full width:\n' '' "$bar9" $p ''
((10#$i)) || read -st .5 _; read -st .1 _ && break
done
Could produce something like this:
sha1sum
with progress bar
Practical GNU/Linux sample: Under linux, you could find a lot of usefull infos under /proc
pseudo filesystem, so using previoulsy defined functions percentBar
and percent
, here is sha1progress
:
percent(){ local p=00$(($1*100000/$2));printf -v "$3" %.2f ${p::-3}.${p: -3};}
sha1Progress() {
local -i totsize crtpos cols=$(tput cols) sha1in sha1pid
local sha1res percent prctbar
exec {sha1in}< <(exec sha1sum -b - <"$1")
sha1pid=$!
read -r totsize < <(stat -Lc %s "$1")
while ! read -ru $sha1in -t .025 sha1res _; do
read -r _ crtpos < /proc/$sha1pid/fdinfo/0
percent $crtpos $totsize percent
percentBar $percent $((cols-8)) prctbar
printf '\r\e[44;38;5;25m%s\e[0m%6.2f%%' "$prctbar" $percent;
done
printf "\r%s %s\e[K\n" $sha1res "$1"
}
Of course, 25 ms
timeout mean approx 40 refresh per second. This could look overkill, but work fine on my host, and anyway, this can be tunned.
Explanation:
exec {sha1in}<
create a new file descriptor for the output of<( ... )
forked task run in backgroundsha1sum -b - <"$1"
ensuring input came from STDIN (fd/0
)while ! read -ru $sha1in -t .025 sha1res _
While no input read from subtask, in25 ms
.../proc/$sha1pid/fdinfo/0
kernel variable showing information about file descriptor 0 (STDIN) of task$sha1pid
Solution 15 - Bash
I needed a progress bar for iterating over the lines in a csv file. Was able to adapt cprn's code into something useful for me:
BAR='##############################'
FILL='------------------------------'
totalLines=$(wc -l $file | awk '{print $1}') # num. lines in file
barLen=30
# --- iterate over lines in csv file ---
count=0
while IFS=, read -r _ col1 col2 col3; do
# update progress bar
count=$(($count + 1))
percent=$((($count * 100 / $totalLines * 100) / 100))
i=$(($percent * $barLen / 100))
echo -ne "\r[${BAR:0:$i}${FILL:$i:barLen}] $count/$totalLines ($percent%)"
# other stuff
(...)
done <$file
Looks like this:
[##----------------------------] 17128/218210 (7%)
Solution 16 - Bash
Most unix commands will not give you the sort of direct feedback from which you can do this. Some will give you output on stdout or stderr that you can use.
For something like tar you could use the -v switch and pipe the output to a program that updates a small animation for each line it reads. As tar writes out a list of files it's unravelled the program can update the animation. To do a percent complete you would have to know the number of files and count the lines.
cp doesn't give this sort of output as far as I know. To monitor the progress of cp you would have to monitor the source and destination files and watch the size of the destination. You could write a small c program using the stat (2) system call to get the file size. This would read the size of the source then poll the destination file and update a % complete bar based on the size of the file written to date.
Solution 17 - Bash
My solution displays the percentage of the tarball that
is currently being uncompressed and written. I use this
when writing out 2GB root filesystem images. You really
need a progress bar for these things. What I do is use
gzip --list
to get the total uncompressed size of the
tarball. From that I calculate the blocking-factor needed
to divide the file into 100 parts. Finally, I print a
checkpoint message for each block. For a 2GB file this
gives about 10MB a block. If that is too big then you can
divide the BLOCKING_FACTOR by 10 or 100, but then it's
harder to print pretty output in terms of a percentage.
Assuming you are using Bash then you can use the following shell function
untar_progress ()
{
TARBALL=$1
BLOCKING_FACTOR=$(gzip --list ${TARBALL} |
perl -MPOSIX -ane '$.==2 && print ceil $F[1]/50688')
tar --blocking-factor=${BLOCKING_FACTOR} --checkpoint=1 \
--checkpoint-action='ttyout=Wrote %u% \r' -zxf ${TARBALL}
}
Solution 18 - Bash
First of all bar is not the only one pipe progress meter. The other (maybe even more known) is pv (pipe viewer).
Secondly bar and pv can be used for example like this:
$ bar file1 | wc -l
$ pv file1 | wc -l
or even:
$ tail -n 100 file1 | bar | wc -l
$ tail -n 100 file1 | pv | wc -l
one useful trick if you want to make use of bar and pv in commands that are working with files given in arguments, like e.g. copy file1 file2, is to use process substitution:
$ copy <(bar file1) file2
$ copy <(pv file1) file2
Process substitution is a bash magic thing that creates temporary fifo pipe files /dev/fd/
Update:
bar command itself allows also for copying. After man bar:
bar --in-file /dev/rmt/1cbn --out-file \
tape-restore.tar --size 2.4g --buffer-size 64k
But process substitution is in my opinion more generic way to do it. An it uses cp program itself.
Solution 19 - Bash
Based on the work of Edouard Lopez, I created a progress bar that fits the size of the screen, whatever it is. Check it out.
[![enter image description here][1]][1]
It's also posted on Git Hub.
#!/bin/bash
#
# Progress bar by Adriano Pinaffo
# Available at https://github.com/adriano-pinaffo/progressbar.sh
# Inspired on work by Edouard Lopez (https://github.com/edouard-lopez/progress-bar.sh)
# Version 1.0
# Date April, 28th 2017
function error {
echo "Usage: $0 [SECONDS]"
case $1 in
1) echo "Pass one argument only"
exit 1
;;
2) echo "Parameter must be a number"
exit 2
;;
*) echo "Unknown error"
exit 999
esac
}
[[ $# -ne 1 ]] && error 1
[[ $1 =~ ^[0-9]+$ ]] || error 2
duration=${1}
barsize=$((`tput cols` - 7))
unity=$(($barsize / $duration))
increment=$(($barsize%$duration))
skip=$(($duration/($duration-$increment)))
curr_bar=0
prev_bar=
for (( elapsed=1; elapsed<=$duration; elapsed++ ))
do
# Elapsed
prev_bar=$curr_bar
let curr_bar+=$unity
[[ $increment -eq 0 ]] || {
[[ $skip -eq 1 ]] &&
{ [[ $(($elapsed%($duration/$increment))) -eq 0 ]] && let curr_bar++; } ||
{ [[ $(($elapsed%$skip)) -ne 0 ]] && let curr_bar++; }
}
[[ $elapsed -eq 1 && $increment -eq 1 && $skip -ne 1 ]] && let curr_bar++
[[ $(($barsize-$curr_bar)) -eq 1 ]] && let curr_bar++
[[ $curr_bar -lt $barsize ]] || curr_bar=$barsize
for (( filled=0; filled<=$curr_bar; filled++ )); do
printf "▇"
done
# Remaining
for (( remain=$curr_bar; remain<$barsize; remain++ )); do
printf " "
done
# Percentage
printf "| %s%%" $(( ($elapsed*100)/$duration))
# Return
sleep 1
printf "\r"
done
printf "\n"
exit 0
Enjoy [1]: https://i.stack.imgur.com/fU6nR.gif
Solution 20 - Bash
I prefer to use dialog with the --gauge param. Is used very often in .deb package installations and other basic configuration stuff of many distros. So you don't need to reinvent the wheel... again
Just put an int value from 1 to 100 @stdin. One basic and silly example:
for a in {1..100}; do sleep .1s; echo $a| dialog --gauge "waiting" 7 30; done
I have this /bin/Wait file (with chmod u+x perms) for cooking purposes :P
#!/bin/bash
INIT=`/bin/date +%s`
NOW=$INIT
FUTURE=`/bin/date -d "$1" +%s`
[ $FUTURE -a $FUTURE -eq $FUTURE ] || exit
DIFF=`echo "$FUTURE - $INIT"|bc -l`
while [ $INIT -le $FUTURE -a $NOW -lt $FUTURE ]; do
NOW=`/bin/date +%s`
STEP=`echo "$NOW - $INIT"|bc -l`
SLEFT=`echo "$FUTURE - $NOW"|bc -l`
MLEFT=`echo "scale=2;$SLEFT/60"|bc -l`
TEXT="$SLEFT seconds left ($MLEFT minutes)";
TITLE="Waiting $1: $2"
sleep 1s
PTG=`echo "scale=0;$STEP * 100 / $DIFF"|bc -l`
echo $PTG| dialog --title "$TITLE" --gauge "$TEXT" 7 72
done
if [ "$2" == "" ]; then msg="Espera terminada: $1";audio="Listo";
else msg=$2;audio=$2;fi
/usr/bin/notify-send --icon=stock_appointment-reminder-excl "$msg"
espeak -v spanish "$audio"
So I can put:
Wait "34 min" "warm up the oven"
or
Wait "dec 31" "happy new year"
Solution 21 - Bash
Many answers describe writing your own commands for printing out '\r' + $some_sort_of_progress_msg
. The problem sometimes is that printing out hundreds of these updates per second will slow down the process.
However, if any of your processes produce output (eg 7z a -r newZipFile myFolder
will output each filename as it compresses it) then a simpler, fast, painless and customisable solution exists.
Install the python module tqdm
.
$ sudo pip install tqdm
$ # now have fun
$ 7z a -r -bd newZipFile myFolder | tqdm >> /dev/null
$ # if we know the expected total, we can have a bar!
$ 7z a -r -bd newZipFile myFolder | grep -o Compressing | tqdm --total $(find myFolder -type f | wc -l) >> /dev/null
Help: tqdm -h
. An example using more options:
$ find / -name '*.py' -exec cat \{} \; | tqdm --unit loc --unit_scale True | wc -l
As a bonus you can also use tqdm
to wrap iterables in python code.
Solution 22 - Bash
for me easiest to use and best looking so far is command pv
or bar
like some guy already wrote
for example: need to make a backup of entire drive with dd
normally you use dd if="$input_drive_path" of="$output_file_path"
with pv
you can make it like this :
dd if="$input_drive_path" | pv | dd of="$output_file_path"
and the progress goes directly to STDOUT
as this:
7.46GB 0:33:40 [3.78MB/s] [ <=> ]
after it is done summary comes up
15654912+0 records in
15654912+0 records out
8015314944 bytes (8.0 GB) copied, 2020.49 s, 4.0 MB/s
Solution 23 - Bash
To indicate progress of activity, try the following commands:
while true; do sleep 0.25 && echo -ne "\r\\" && sleep 0.25 && echo -ne "\r|" && sleep 0.25 && echo -ne "\r/" && sleep 0.25 && echo -ne "\r-"; done;
OR
while true; do sleep 0.25 && echo -ne "\rActivity: \\" && sleep 0.25 && echo -ne "\rActivity: |" && sleep 0.25 && echo -ne "\rActivity: /" && sleep 0.25 && echo -ne "\rActivity: -"; done;
OR
while true; do sleep 0.25 && echo -ne "\r" && sleep 0.25 && echo -ne "\r>" && sleep 0.25 && echo -ne "\r>>" && sleep 0.25 && echo -ne "\r>>>"; sleep 0.25 && echo -ne "\r>>>>"; done;
OR
while true; do sleep .25 && echo -ne "\r:Active:" && sleep .25 && echo -ne "\r:aCtive:" && sleep .25 && echo -ne "\r:acTive:" && sleep .25 && echo -ne "\r:actIve:" && sleep .25 && echo -ne "\r:actiVe:" && sleep .25 && echo -ne "\r:activE:"; done;
One can use flags/variables inside the while loop to check and display the value/extent of progress.
Solution 24 - Bash
Solution 25 - Bash
It may be achieved in a pretty simple way:
- iterate from 0 to 100 with
for
loop - sleep every step for 25ms (0.25 second)
- append to the
$bar
variable another=
sign to make the progress bar wider - echo progress bar and percentage (
\r
cleans line and returns to the beginning of the line;-ne
makesecho
doesn't add newline at the end and parses\r
special character)
function progress {
bar=''
for (( x=0; x <= 100; x++ )); do
sleep 0.25
bar="${bar}="
echo -ne "$bar ${x}%\r"
done
echo -e "\n"
}
$ progress
> ========== 10% # here: after 2.5 seconds
$ progress
> ============================== 30% # here: after 7.5 seconds
COLORED PROGRESS BAR
function progress {
bar=''
for (( x=0; x <= 100; x++ )); do
sleep 0.05
bar="${bar} "
echo -ne "\r"
echo -ne "\e[43m$bar\e[0m"
local left="$(( 100 - $x ))"
printf " %${left}s"
echo -n "${x}%"
done
echo -e "\n"
}
To make a progress bar colorful, you can use formatting escape sequence - here the progress bar is yellow: \e[43m
, then we reset custom settings with \e[0m
, otherwise it would affect further input even when the progress bar is done.
Solution 26 - Bash
I needed a progress bar that would fit in popup bubble message (notify-send
) to represent TV volume level. Recently I've been writing a music player in python and the TV picture is turned off most of the time.
Sample output from terminal
Bash script
#!/bin/bash
# Show a progress bar at step number $1 (from 0 to 100)
function is_int() { test "$@" -eq "$@" 2> /dev/null; }
# Parameter 1 must be integer
if ! is_int "$1" ; then
echo "Not an integer: ${1}"
exit 1
fi
# Parameter 1 must be >= 0 and <= 100
if [ "$1" -ge 0 ] && [ "$1" -le 100 ] 2>/dev/null
then
:
else
echo bad volume: ${1}
exit 1
fi
# Main function designed for quickly copying to another program
Main () {
Bar="" # Progress Bar / Volume level
Len=25 # Length of Progress Bar / Volume level
Div=4 # Divisor into Volume for # of blocks
Fill="▒" # Fill up to $Len
Arr=( "▉" "▎" "▌" "▊" ) # UTF-8 left blocks: 7/8, 1/4, 1/2, 3/4
FullBlock=$((${1} / Div)) # Number of full blocks
PartBlock=$((${1} % Div)) # Size of partial block (array index)
while [[ $FullBlock -gt 0 ]]; do
Bar="$Bar${Arr[0]}" # Add 1 full block into Progress Bar
(( FullBlock-- )) # Decrement full blocks counter
done
# If remainder zero no partial block, else append character from array
if [[ $PartBlock -gt 0 ]]; then
Bar="$Bar${Arr[$PartBlock]}"
fi
while [[ "${#Bar}" -lt "$Len" ]]; do
Bar="$Bar$Fill" # Pad Progress Bar with fill character
done
echo Volume: "$1 $Bar"
exit 0 # Remove this line when copying into program
} # Main
Main "$@"
Test bash script
Use this script to test the progress bar in the terminal.
#!/bin/bash
# test_progress_bar3
Main () {
tput civis # Turn off cursor
for ((i=0; i<=100; i++)); do
CurrLevel=$(./progress_bar3 "$i") # Generate progress bar 0 to 100
echo -ne "$CurrLevel"\\r # Reprint overtop same line
sleep .04
done
echo -e \\n # Advance line to keep last progress
echo "$0 Done"
tput cnorm # Turn cursor back on
} # Main
Main "$@"
TL;DR
This section details how notify-send
is used to quickly spam popup bubble messages to the desktop. This is required because volume level can change many times a second and the default bubble message behavior is for a message to stay on the desktop for many seconds.
Sample popup bubble message
Popup bubble message bash code
From the script above the main
function was copied to a new functioned called VolumeBar
in an existing bash script called tvpowered
. The exit 0
command in the copied main
function was removed.
Here's how to call it and let Ubuntu's notify-send
command know we will be spamming popup bubble message:
VolumeBar $CurrVolume
# Ask Ubuntu: https://askubuntu.com/a/871207/307523
notify-send --urgency=critical "tvpowered" \
-h string:x-canonical-private-synchronous:volume \
--icon=/usr/share/icons/gnome/48x48/devices/audio-speakers.png \
"Volume: $CurrVolume $Bar"
This is the new line which tells notify-send
to immediately replace last popup bubble:
-h string:x-canonical-private-synchronous:volume \
volume
groups the popup bubble messages together and new messages in this group immediately replaces the previous. You can use anything
instead of volume
.
Solution 27 - Bash
This is only applicable using gnome zenity. Zenity provides a great native interface to bash scripts: https://help.gnome.org/users/zenity/stable/
From Zenity Progress Bar Example:
#!/bin/sh
(
echo "10" ; sleep 1
echo "# Updating mail logs" ; sleep 1
echo "20" ; sleep 1
echo "# Resetting cron jobs" ; sleep 1
echo "50" ; sleep 1
echo "This line will just be ignored" ; sleep 1
echo "75" ; sleep 1
echo "# Rebooting system" ; sleep 1
echo "100" ; sleep 1
) |
zenity --progress \
--title="Update System Logs" \
--text="Scanning mail logs..." \
--percentage=0
if [ "$?" = -1 ] ; then
zenity --error \
--text="Update canceled."
fi
Solution 28 - Bash
I used an answer from https://stackoverflow.com/questions/3211891/creating-string-of-repeated-characters-in-shell-script for char repeating. I have two relatively small bash versions for scripts that need to display progress bar (for example, a loop that goes through many files, but not useful for big tar files or copy operations). The faster one consists of two functions, one to prepare the strings for bar display:
preparebar() {
# $1 - bar length
# $2 - bar char
barlen=$1
barspaces=$(printf "%*s" "$1")
barchars=$(printf "%*s" "$1" | tr ' ' "$2")
}
and one to display a progress bar:
progressbar() {
# $1 - number (-1 for clearing the bar)
# $2 - max number
if [ $1 -eq -1 ]; then
printf "\r $barspaces\r"
else
barch=$(($1*barlen/$2))
barsp=$((barlen-barch))
printf "\r[%.${barch}s%.${barsp}s]\r" "$barchars" "$barspaces"
fi
}
It could be used as:
preparebar 50 "#"
which means prepare strings for bar with 50 "#" characters, and after that:
progressbar 35 80
will display the number of "#" characters that corresponds to 35/80 ratio:
[##################### ]
Be aware that function displays the bar on the same line over and over until you (or some other program) prints a newline. If you put -1 as first parameter, the bar would be erased:
progressbar -1 80
The slower version is all in one function:
progressbar() {
# $1 - number
# $2 - max number
# $3 - number of '#' characters
if [ $1 -eq -1 ]; then
printf "\r %*s\r" "$3"
else
i=$(($1*$3/$2))
j=$(($3-i))
printf "\r[%*s" "$i" | tr ' ' '#'
printf "%*s]\r" "$j"
fi
}
and it can be used as (the same example as above):
progressbar 35 80 50
If you need progressbar on stderr, just add >&2
at the end of each printf command.
Solution 29 - Bash
Using suggestions listed above, I decided to implement my own progress bar.
#!/usr/bin/env bash
main() {
for (( i = 0; i <= 100; i=$i + 1)); do
progress_bar "$i"
sleep 0.1;
done
progress_bar "done"
exit 0
}
progress_bar() {
if [ "$1" == "done" ]; then
spinner="X"
percent_done="100"
progress_message="Done!"
new_line="\n"
else
spinner='/-\|'
percent_done="${1:-0}"
progress_message="$percent_done %"
fi
percent_none="$(( 100 - $percent_done ))"
[ "$percent_done" -gt 0 ] && local done_bar="$(printf '#%.0s' $(seq -s ' ' 1 $percent_done))"
[ "$percent_none" -gt 0 ] && local none_bar="$(printf '~%.0s' $(seq -s ' ' 1 $percent_none))"
# print the progress bar to the screen
printf "\r Progress: [%s%s] %s %s${new_line}" \
"$done_bar" \
"$none_bar" \
"${spinner:x++%${#spinner}:1}" \
"$progress_message"
}
main "$@"
Solution 30 - Bash
Flexible version with randomized colors, a string to manipulate and date.
function spinner() {
local PID="$1"
local str="${2:-Processing!}"
local delay="0.1"
# tput civis # hide cursor
while ( kill -0 $PID 2>/dev/null )
do
printf "\e[38;5;$((RANDOM%257))m%s\r\e[0m" "[$(date '+%d/%m/%Y %H:%M:%S')][ 🙉 🙊 🙈 $str 🙈 🙊 🙉 ]"; sleep "$delay"
printf "\e[38;5;$((RANDOM%257))m%s\r\e[0m" "[$(date '+%d/%m/%Y %H:%M:%S')][ 🙈 🙉 🙉 $str 🙊 🙉 🙈 ]"; sleep "$delay"
printf "\e[38;5;$((RANDOM%257))m%s\r\e[0m" "[$(date '+%d/%m/%Y %H:%M:%S')][ 🙊 🙈 🙊 $str 🙉 🙈 🙊 ]"; sleep "$delay"
done
printf "\e[38;5;$((RANDOM%257))m%s\r\e[0m" "[$(date '+%d/%m/%Y %H:%M:%S')][ ✅ ✅ ✅ Done! ✅ ✅ ✅ ]"; sleep "$delay"
# tput cnorm # restore cursor
return 0
}
Usage:
# your long running proccess pushed to the background
sleep 20 &
# spinner capture-previous-proccess-id string
spinner $! 'Working!'
output example:
[04/06/2020 03:22:24][ 🙊 🙈 🙊 Seeding! 🙉 🙈 🙊 ]
Solution 31 - Bash
I did a pure shell version for an embedded system taking advantage of:
-
/usr/bin/dd's SIGUSR1 signal handling feature.
Basically, if you send a 'kill SIGUSR1 $(pid_of_running_dd_process)', it'll output a summary of throughput speed and amount transferred.
-
backgrounding dd and then querying it regularly for updates, and generating hash ticks like old-school ftp clients used to.
-
Using /dev/stdout as the destination for non-stdout friendly programs like scp
The end result allows you to take any file transfer operation and get progress update that looks like old-school FTP 'hash' output where you'd just get a hash mark for every X bytes.
This is hardly production quality code, but you get the idea. I think it's cute.
For what it's worth, the actual byte-count might not be reflected correctly in the number of hashes - you may have one more or less depending on rounding issues. Don't use this as part of a test script, it's just eye-candy. And, yes, I'm aware this is terribly inefficient - it's a shell script and I make no apologies for it.
Examples with wget, scp and tftp provided at the end. It should work with anything that has emits data. Make sure to use /dev/stdout for programs that aren't stdout friendly.
#!/bin/sh
#
# Copyright (C) Nathan Ramella ([email protected]) 2010
# LGPLv2 license
# If you use this, send me an email to say thanks and let me know what your product
# is so I can tell all my friends I'm a big man on the internet!
progress_filter() {
local START=$(date +"%s")
local SIZE=1
local DURATION=1
local BLKSZ=51200
local TMPFILE=/tmp/tmpfile
local PROGRESS=/tmp/tftp.progress
local BYTES_LAST_CYCLE=0
local BYTES_THIS_CYCLE=0
rm -f ${PROGRESS}
dd bs=$BLKSZ of=${TMPFILE} 2>&1 \
| grep --line-buffered -E '[[:digit:]]* bytes' \
| awk '{ print $1 }' >> ${PROGRESS} &
# Loop while the 'dd' exists. It would be 'more better' if we
# actually looked for the specific child ID of the running
# process by identifying which child process it was. If someone
# else is running dd, it will mess things up.
# My PID handling is dumb, it assumes you only have one running dd on
# the system, this should be fixed to just get the PID of the child
# process from the shell.
while [ $(pidof dd) -gt 1 ]; do
# PROTIP: You can sleep partial seconds (at least on linux)
sleep .5
# Force dd to update us on it's progress (which gets
# redirected to $PROGRESS file.
#
# dumb pid handling again
pkill -USR1 dd
local BYTES_THIS_CYCLE=$(tail -1 $PROGRESS)
local XFER_BLKS=$(((BYTES_THIS_CYCLE-BYTES_LAST_CYCLE)/BLKSZ))
# Don't print anything unless we've got 1 block or more.
# This allows for stdin/stderr interactions to occur
# without printing a hash erroneously.
# Also makes it possible for you to background 'scp',
# but still use the /dev/stdout trick _even_ if scp
# (inevitably) asks for a password.
#
# Fancy!
if [ $XFER_BLKS -gt 0 ]; then
printf "#%0.s" $(seq 0 $XFER_BLKS)
BYTES_LAST_CYCLE=$BYTES_THIS_CYCLE
fi
done
local SIZE=$(stat -c"%s" $TMPFILE)
local NOW=$(date +"%s")
if [ $NOW -eq 0 ]; then
NOW=1
fi
local DURATION=$(($NOW-$START))
local BYTES_PER_SECOND=$(( SIZE / DURATION ))
local KBPS=$((SIZE/DURATION/1024))
local MD5=$(md5sum $TMPFILE | awk '{ print $1 }')
# This function prints out ugly stuff suitable for eval()
# rather than a pretty string. This makes it a bit more
# flexible if you have a custom format (or dare I say, locale?)
printf "\nDURATION=%d\nBYTES=%d\nKBPS=%f\nMD5=%s\n" \
$DURATION \
$SIZE \
$KBPS \
$MD5
}
Examples:
echo "wget"
wget -q -O /dev/stdout http://www.blah.com/somefile.zip | progress_filter
echo "tftp"
tftp -l /dev/stdout -g -r something/firmware.bin 192.168.1.1 | progress_filter
echo "scp"
scp [email protected]:~/myfile.tar /dev/stdout | progress_filter
Solution 32 - Bash
In case you have to show a temporal progress bar (by knowing in advance the showing time), you can use Python as follows:
#!/bin/python
from time import sleep
import sys
if len(sys.argv) != 3:
print "Usage:", sys.argv[0], "<total_time>", "<progressbar_size>"
exit()
TOTTIME=float(sys.argv[1])
BARSIZE=float(sys.argv[2])
PERCRATE=100.0/TOTTIME
BARRATE=BARSIZE/TOTTIME
for i in range(int(TOTTIME)+1):
sys.stdout.write('\r')
s = "[%-"+str(int(BARSIZE))+"s] %d%% "
sys.stdout.write(s % ('='*int(BARRATE*i), int(PERCRATE*i)))
sys.stdout.flush()
SLEEPTIME = 1.0
if i == int(TOTTIME): SLEEPTIME = 0.1
sleep(SLEEPTIME)
print ""
Then, assuming you saved the Python script as progressbar.py
, it's possible to show the progress bar from your bash script by running the following command:
python progressbar.py 10 50
It would show a progress bar sized 50
characters and "running" for 10
seconds.
Solution 33 - Bash
I have built on the answer provided by fearside
This connects to an Oracle database to retrieve the progress of an RMAN restore.
#!/bin/bash
# 1. Create ProgressBar function
# 1.1 Input is currentState($1) and totalState($2)
function ProgressBar {
# Process data
let _progress=(${1}*100/${2}*100)/100
let _done=(${_progress}*4)/10
let _left=40-$_done
# Build progressbar string lengths
_fill=$(printf "%${_done}s")
_empty=$(printf "%${_left}s")
# 1.2 Build progressbar strings and print the ProgressBar line
# 1.2.1 Output example:
# 1.2.1.1 Progress : [########################################] 100%
printf "\rProgress : [${_fill// /#}${_empty// /-}] ${_progress}%%"
}
function rman_check {
sqlplus -s / as sysdba <<EOF
set heading off
set feedback off
select
round((sofar/totalwork) * 100,0) pct_done
from
v\$session_longops
where
totalwork > sofar
AND
opname NOT LIKE '%aggregate%'
AND
opname like 'RMAN%';
exit
EOF
}
# Variables
_start=1
# This accounts as the "totalState" variable for the ProgressBar function
_end=100
_rman_progress=$(rman_check)
#echo ${_rman_progress}
# Proof of concept
#for number in $(seq ${_start} ${_end})
while [ ${_rman_progress} -lt 100 ]
do
for number in _rman_progress
do
sleep 10
ProgressBar ${number} ${_end}
done
_rman_progress=$(rman_check)
done
printf '\nFinished!\n'
Solution 34 - Bash
#!/bin/bash
function progress_bar() {
bar=""
total=10
[[ -z $1 ]] && input=0 || input=${1}
x="##"
for i in `seq 1 10`; do
if [ $i -le $input ] ;then
bar=$bar$x
else
bar="$bar "
fi
done
#pct=$((200*$input/$total % 2 + 100*$input/$total))
pct=$(($input*10))
echo -ne "Progress : [ ${bar} ] (${pct}%) \r"
sleep 1
if [ $input -eq 10 ] ;then
echo -ne '\n'
fi
}
could create a function that draws this on a scale say 1-10 for the number of bars :
progress_bar 1
echo "doing something ..."
progress_bar 2
echo "doing something ..."
progress_bar 3
echo "doing something ..."
progress_bar 8
echo "doing something ..."
progress_bar 10
Solution 35 - Bash
#!/bin/bash
tot=$(wc -c /proc/$$/fd/255 | awk '/ /{print $1}')
now() {
echo $(( 100* ($(awk '/^pos:/{print $2}' < /proc/$$/fdinfo/255)-166) / (tot-166) )) "%"
}
now;
now;
now;
now;
now;
now;
now;
now;
now;
output:
0 %
12 %
25 %
37 %
50 %
62 %
75 %
87 %
100 %
note: if instead of 255 you put 1 you will monitor the standard in...with 2 the standard out (but you must modify the source to set "tot" to the projected output file size)
Solution 36 - Bash
There are many different answers about this topic, but when calculating percentage for text file operation, using current length / total size
way, for example showing percentage of ver_big_file.json
progress, and I recommend using awk
for this purpose, like below code:
awk '
function bar(x){s="";i=0;while (i++ < x) s=s "#";return s}
BEGIN{
("ls -l " ARGV[1]) | getline total;
split(total,array);
total=array[5];
}
{
cur+=length($0)+1;
percent=int(cur / total * 100);
printf "LINE %s:%s %s%%\r", NR, bar(percent*.8), percent
}
END {print}' very_big_file.json | grep "keyword" | ...
This way it's very precise, stream based, but it's only suitable for text files.
Solution 37 - Bash
This is a psychedelic progressbar for bash scripting by nExace. It can be called from command line as './progressbar x y' where 'x' is a time in seconds and 'y' is a message associated with that portion of the progress.
The inner progressbar() function itself is good standalone as well if you want other portions of your script to control the progressbar. For instance, sending 'progressbar 10 "Creating directory tree";' will display:
[####### ] (10%) Creating directory tree
Of course it will be nicely psychedelic though...
#!/bin/bash
if [ "$#" -eq 0 ]; then echo "x is \"time in seconds\" and z is \"message\""; echo "Usage: progressbar x z"; exit; fi
progressbar() {
local loca=$1; local loca2=$2;
declare -a bgcolors; declare -a fgcolors;
for i in {40..46} {100..106}; do
bgcolors+=("$i")
done
for i in {30..36} {90..96}; do
fgcolors+=("$i")
done
local u=$(( 50 - loca ));
local y; local t;
local z; z=$(printf '%*s' "$u");
local w=$(( loca * 2 ));
local bouncer=".oO°Oo.";
for ((i=0;i<loca;i++)); do
t="${bouncer:((i%${#bouncer})):1}"
bgcolor="\\E[${bgcolors[RANDOM % 14]}m \\033[m"
y+="$bgcolor";
done
fgcolor="\\E[${fgcolors[RANDOM % 14]}m"
echo -ne " $fgcolor$t$y$z$fgcolor$t \\E[96m(\\E[36m$w%\\E[96m)\\E[92m $fgcolor$loca2\\033[m\r"
};
timeprogress() {
local loca="$1"; local loca2="$2";
loca=$(bc -l <<< scale=2\;"$loca/50")
for i in {1..50}; do
progressbar "$i" "$loca2";
sleep "$loca";
done
printf "\n"
};
timeprogress "$1" "$2"
Solution 38 - Bash
First execute the process to the background, then watch it's running status frequently,that was running print the pattern and again check it status was running or not;
Using while loop to watch the status of the process frequently.
use the pgrep or any other command to watch and getting running status of a process.
if using pgrep redirect the unnecessary output to /dev/null as needed.
Code:
sleep 12&
while pgrep sleep &> /dev/null;do echo -en "#";sleep 0.5;done
This "#" will printed until sleep terminate,this method used to implement the progress bar for progress time of program.
you can also use this method to the commands to shell scripts for analyze it process time as visual.
BUG: this pgrep method doesn't works in all situations,unexpectedly the another process was running with same name, the while loop does not end.
so getting the process running status by specify it's PID, using may the process can available with some commands,
the command ps a will list all the process with id,you need grep to find-out the pid of the specified process
Solution 39 - Bash
I wanted to track progress based on the number of lines a command output against a target number of lines from a previous run:
#!/bin/bash
function lines {
local file=$1
local default=$2
if [[ -f $file ]]; then
wc -l $file | awk '{print $1}';
else
echo $default
fi
}
function bar {
local items=$1
local total=$2
local size=$3
percent=$(($items*$size/$total % $size))
left=$(($size-$percent))
chars=$(local s=$(printf "%${percent}s"); echo "${s// /=}")
echo -ne "[$chars>";
printf "%${left}s"
echo -ne ']\r'
}
function clearbar {
local size=$1
printf " %${size}s "
echo -ne "\r"
}
function progress {
local pid=$1
local total=$2
local file=$3
bar 0 100 50
while [[ "$(ps a | awk '{print $1}' | grep $pid)" ]]; do
bar $(lines $file 0) $total 50
sleep 1
done
clearbar 50
wait $pid
return $?
}
Then use it like this:
target=$(lines build.log 1000)
(mvn clean install > build.log 2>&1) &
progress $! $target build.log
It outputs a progress bar that looks something like this:
[===============================================> ]
The bar grows as the number of lines output reaches the target. If the number of lines exceeds the target, the bar starts over (hopefully the target is good).
BTW: I'm using bash on Mac OSX. I based this code on a spinner from mariascio.
Solution 40 - Bash
To make a tar progress bar
tar xzvf pippo.tgz |xargs -L 19 |xargs -I@ echo -n "."
Where "19" is the number of files in the tar divided the length of the intended progress bar. Example: the .tgz contains 140 files and you'll want a progress bar of 76 ".", you can put -L 2.
You'll need nothing else.
Solution 41 - Bash
Once I also had a busy script which was occupied for hours without showing any progress. So I implemented a function which mainly includes the techniques of the previous answers:
#!/bin/bash
# Updates the progress bar
# Parameters: 1. Percentage value
update_progress_bar()
{
if [ $# -eq 1 ];
then
if [[ $1 == [0-9]* ]];
then
if [ $1 -ge 0 ];
then
if [ $1 -le 100 ];
then
local val=$1
local max=100
echo -n "["
for j in $(seq $max);
do
if [ $j -lt $val ];
then
echo -n "="
else
if [ $j -eq $max ];
then
echo -n "]"
else
echo -n "."
fi
fi
done
echo -ne " "$val"%\r"
if [ $val -eq $max ];
then
echo ""
fi
fi
fi
fi
fi
}
update_progress_bar 0
# Further (time intensive) actions and progress bar updates
update_progress_bar 100
Solution 42 - Bash
I had the same thing to do today and based on Diomidis answer, here is how I did it (linux debian 6.0.7). Maybe, that could help you :
#!/bin/bash
echo "getting script inode"
inode=`ls -i ./script.sh | cut -d" " -f1`
echo $inode
echo "getting the script size"
size=`cat script.sh | wc -c`
echo $size
echo "executing script"
./script.sh &
pid=$!
echo "child pid = $pid"
while true; do
let offset=`lsof -o0 -o -p $pid | grep $inode | awk -F" " '{print $7}' | cut -d"t" -f 2`
let percent=100*$offset/$size
echo -ne " $percent %\r"
done