How do I raise the same Exception with a custom message in Python?

I have this try block in my code:

try:
    do_something_that_might_raise_an_exception()
except ValueError as err:
    errmsg = 'My custom error message.'
    raise ValueError(errmsg)

Strictly speaking, I am actually raising another ValueError, not the ValueError thrown by do_something...(), which is referred to as err in this case. How do I attach a custom message to err? I try the following code but fails due to err, a ValueError instance, not being callable:

try:
    do_something_that_might_raise_an_exception()
except ValueError as err:
    errmsg = 'My custom error message.'
    raise err(errmsg)

If you're lucky enough to only support python 3.x, this really becomes a thing of beauty :)

raise from

We can chain the exceptions using raise from.

try:
    1 / 0
except ZeroDivisionError as e:
    raise Exception('Smelly socks') from e

In this case, the exception your caller would catch has the line number of the place where we raise our exception.

Traceback (most recent call last):
  File "test.py", line 2, in <module>
    1 / 0
ZeroDivisionError: division by zero

The above exception was the direct cause of the following exception:

Traceback (most recent call last):
  File "test.py", line 4, in <module>
    raise Exception('Smelly socks') from e
Exception: Smelly socks

Notice the bottom exception only has the stacktrace from where we raised our exception. Your caller could still get the original exception by accessing the __cause__ attribute of the exception they catch.

with_traceback

Or you can use with_traceback.

try:
    1 / 0
except ZeroDivisionError as e:
    raise Exception('Smelly socks').with_traceback(e.__traceback__)

Using this form, the exception your caller would catch has the traceback from where the original error occurred.

Traceback (most recent call last):
  File "test.py", line 2, in <module>
    1 / 0
ZeroDivisionError: division by zero

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "test.py", line 4, in <module>
    raise Exception('Smelly socks').with_traceback(e.__traceback__)
  File "test.py", line 2, in <module>
    1 / 0
Exception: Smelly socks

Notice the bottom exception has the line where we performed the invalid division as well as the line where we reraise the exception.

Update: For Python 3, check Ben's answer

---

To attach a message to the current exception and re-raise it: (the outer try/except is just to show the effect)

For python 2.x where x>=6:

try:
    try:
      raise ValueError  # something bad...
    except ValueError as err:
      err.message=err.message+" hello"
      raise              # re-raise current exception
except ValueError as e:
    print(" got error of type "+ str(type(e))+" with message " +e.message)

This will also do the right thing if err is derived from ValueError. For example UnicodeDecodeError.

Note that you can add whatever you like to err. For example err.problematic_array=[1,2,3].

---

Edit: @Ducan points in a comment the above does not work with python 3 since .message is not a member of ValueError. Instead you could use this (valid python 2.6 or later or 3.x):

try:
    try:
      raise ValueError
    except ValueError as err:
       if not err.args: 
           err.args=('',)
       err.args = err.args + ("hello",)
       raise 
except ValueError as e:
    print(" error was "+ str(type(e))+str(e.args))

Edit2:

Depending on what the purpose is, you can also opt for adding the extra information under your own variable name. For both python2 and python3:

try:
    try:
      raise ValueError
    except ValueError as err:
       err.extra_info = "hello"
       raise 
except ValueError as e:
    print(" error was "+ str(type(e))+str(e))
    if 'extra_info' in dir(e):
       print e.extra_info

It seems all the answers are adding info to e.args[0], thereby altering the existing error message. Is there a downside to extending the args tuple instead? I think the possible upside is, you can leave the original error message alone for cases where parsing that string is needed; and you could add multiple elements to the tuple if your custom error handling produced several messages or error codes, for cases where the traceback would be parsed programmatically (like via a system monitoring tool).

## Approach #1, if the exception may not be derived from Exception and well-behaved:

def to_int(x):
    try:
        return int(x)
    except Exception as e:
        e.args = (e.args if e.args else tuple()) + ('Custom message',)
        raise

>>> to_int('12')
12

>>> to_int('12 monkeys')
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "<stdin>", line 3, in to_int
ValueError: ("invalid literal for int() with base 10: '12 monkeys'", 'Custom message')

or

## Approach #2, if the exception is always derived from Exception and well-behaved:

def to_int(x):
    try:
        return int(x)
    except Exception as e:
        e.args += ('Custom message',)
        raise

>>> to_int('12')
12

>>> to_int('12 monkeys')
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
  File "<stdin>", line 3, in to_int
ValueError: ("invalid literal for int() with base 10: '12 monkeys'", 'Custom message')

Can you see a downside to this approach?

try:
    try:
        int('a')
    except ValueError as e:
        raise ValueError('There is a problem: {0}'.format(e))
except ValueError as err:
    print err

prints:

There is a problem: invalid literal for int() with base 10: 'a'

This only works with Python 3. You can modify the exception's original arguments and add your own arguments.

An exception remembers the args it was created with. I presume this is so that you can modify the exception.

In the function reraise we prepend the exception's original arguments with any new arguments that we want (like a message). Finally we re-raise the exception while preserving the trace-back history.

def reraise(e, *args):
  '''re-raise an exception with extra arguments
  :param e: The exception to reraise
  :param args: Extra args to add to the exception
  '''

  # e.args is a tuple of arguments that the exception with instantiated with.
  #
  e.args = args + e.args

  # Recreate the expection and preserve the traceback info so thta we can see 
  # where this exception originated.
  #
  raise e.with_traceback(e.__traceback__)   


def bad():
  raise ValueError('bad')

def very():
  try:
    bad()
  except Exception as e:
    reraise(e, 'very')

def very_very():
  try:
    very()
  except Exception as e:
    reraise(e, 'very')

very_very()

output

Traceback (most recent call last):
  File "main.py", line 35, in <module>
    very_very()
  File "main.py", line 30, in very_very
    reraise(e, 'very')
  File "main.py", line 15, in reraise
    raise e.with_traceback(e.__traceback__)
  File "main.py", line 28, in very_very
    very()
  File "main.py", line 24, in very
    reraise(e, 'very')
  File "main.py", line 15, in reraise
    raise e.with_traceback(e.__traceback__)
  File "main.py", line 22, in very
    bad()
  File "main.py", line 18, in bad
    raise ValueError('bad')
ValueError: ('very', 'very', 'bad')

This code template should allow you to raise an exception with a custom message.

try:
     raise ValueError
except ValueError as err:
    raise type(err)("my message")

Either raise the new exception with your error message using

raise Exception('your error message')

or

raise ValueError('your error message')

within the place where you want to raise it OR attach (replace) error message into current exception using 'from' (Python 3.x supported only):

except ValueError as e:
  raise ValueError('your message') from e

This is the function I use to modify the exception message in Python 2.7 and 3.x while preserving the original traceback. It requires six

def reraise_modify(caught_exc, append_msg, prepend=False):
    """Append message to exception while preserving attributes.

    Preserves exception class, and exception traceback.

    Note:
        This function needs to be called inside an except because
        `sys.exc_info()` requires the exception context.

    Args:
        caught_exc(Exception): The caught exception object
        append_msg(str): The message to append to the caught exception
        prepend(bool): If True prepend the message to args instead of appending

    Returns:
        None

    Side Effects:
        Re-raises the exception with the preserved data / trace but
        modified message
    """
    ExceptClass = type(caught_exc)
    # Keep old traceback
    traceback = sys.exc_info()[2]
    if not caught_exc.args:
        # If no args, create our own tuple
        arg_list = [append_msg]
    else:
        # Take the last arg
        # If it is a string
        # append your message.
        # Otherwise append it to the
        # arg list(Not as pretty)
        arg_list = list(caught_exc.args[:-1])
        last_arg = caught_exc.args[-1]
        if isinstance(last_arg, str):
            if prepend:
                arg_list.append(append_msg + last_arg)
            else:
                arg_list.append(last_arg + append_msg)
        else:
            arg_list += [last_arg, append_msg]
    caught_exc.args = tuple(arg_list)
    six.reraise(ExceptClass,
                caught_exc,
                traceback)

The current answer did not work good for me, if the exception is not re-caught the appended message is not shown.

But doing like below both keeps the trace and shows the appended message regardless if the exception is re-caught or not.

try:
  raise ValueError("Original message")
except ValueError as err:
  t, v, tb = sys.exc_info()
  raise t, ValueError(err.message + " Appended Info"), tb

( I used Python 2.7, have not tried it in Python 3 )

Python 3 built-in exceptions have the strerror field:

except ValueError as err:
  err.strerror = "New error message"
  raise err

None of the above solutions did exactly what I wanted, which was to add some information to the first part of the error message i.e. I wanted my users to see my custom message first.

This worked for me:

exception_raised = False
try:
    do_something_that_might_raise_an_exception()
except ValueError as e:
    message = str(e)
    exception_raised = True
   
if exception_raised:
    message_to_prepend = "Custom text"
    raise ValueError(message_to_prepend + message)

Try below:

try:
    raise ValueError("Original message. ")
except Exception as err:
    message = 'My custom error message. '
    # Change the order below to "(message + str(err),)" if custom message is needed first. 
    err.args = (str(err) + message,)
    raise 

Output:

---------------------------------------------------------------------------
ValueError                                Traceback (most recent call last)
      1 try:
----> 2     raise ValueError("Original message")
      3 except Exception as err:
      4     message = 'My custom error message.'
      5     err.args = (str(err) + ". " + message,)

ValueError: Original message. My custom error message.

I tried this compact version of @RobinL, and worked as well:

try:
    do_something_that_might_raise_an_exception()
except ValueError as e:
    raise ValueError(f'Custom text {e}')

Many of proposed solutions above re-raising an exception again, which is considered as a bad practice. Something simple like this will do the job

try:
    import settings
except ModuleNotFoundError:
    print("Something meaningfull\n")
    raise 

So You'll print the error message first, and then raise the stack trace, or you can simply exit by sys.exit(1) and not show the error message at all.

if you want to custom the error type, a simple thing you can do is to define an error class based on ValueError.