How do I get a list of installed CPAN modules?
PerlCpanPerl Problem Overview
Aside from trying
perldoc <module name>
individually for any CPAN module that takes my fancy or going through the file system and looking at the directories I have no idea what modules we have installed.
What's the easiest way to just get a big list of every CPAN module installed? From the command line or otherwise.
Perl Solutions
Solution 1 - Perl
This is answered in the Perl FAQ, the answer which can be quickly found with perldoc -q installed. In short, it comes down to using ExtUtils::Installed or using File::Find, variants of both of which have been covered previously in this thread.
You can also find the FAQ entry "How do I find which modules are installed on my system?" in perlfaq3. You can see a list of all FAQ answers by looking in perlfaq
Solution 2 - Perl
perldoc perllocal
Edit: There's a (little) more info about it in the CPAN FAQ
Solution 3 - Perl
perldoc -q installed
claims that cpan -l will do the trick, however it's not working for me. The other option:
cpan -a
does spit out a nice list of installed packages and has the nice side effect of writing them to a file.
Solution 4 - Perl
It's worth noting that perldoc perllocal will only report on modules installed via CPAN. If someone installs modules manually, it won't find them. Also, if you have multiple people installing modules and the perllocal.pod is under source control, people might resolve conflicts incorrectly and corrupt the list (this has happened here at work, for example).
Regrettably, the solution appears to be walking through @INC with File::Find or something similar. However, that doesn't just find the modules, it also finds related modules in a distribution. For example, it would report TAP::Harness and TAP::Parser in addition to the actual distribution name of Test::Harness (assuming you have version 3 or above). You could potentially match them up with distribution names and discard those names which don't match, but then you might be discarding locally built and installed modules.
I believe brian d foy's backpan indexing work is supposed to have code to hand it at .pm file and it will attempt to infer the distribution, but even this fails at times because what's in a package is not necessarily installed (see Devel::Cover::Inc for an example).
Solution 5 - Perl
$ for M in `perldoc -t perllocal|grep Module |sed -e 's/^.*" //'`; do V=`perldoc -t perllocal|awk "/$M/{y=1;next}y" |grep VERSION |head -n 1`; printf "%30s %s\n" "$M" "$V"; done |sort
Class::Inspector * "VERSION: 1.28"
Crypt::CBC * "VERSION: 2.33"
Crypt::Rijndael * "VERSION: 1.11"
Data::Dump * "VERSION: 1.22"
DBD::Oracle * "VERSION: 1.68"
DBI * "VERSION: 1.630"
Digest::SHA * "VERSION: 5.92"
ExtUtils::MakeMaker * "VERSION: 6.84"
install * "VERSION: 6.84"
IO::SessionData * "VERSION: 1.03"
IO::Socket::SSL * "VERSION: 2.016"
JSON * "VERSION: 2.90"
MIME::Base64 * "VERSION: 3.14"
MIME::Base64 * "VERSION: 3.14"
Mozilla::CA * "VERSION: 20141217"
Net::SSLeay * "VERSION: 1.68"
parent * "VERSION: 0.228"
REST::Client * "VERSION: 271"
SOAP::Lite * "VERSION: 1.08"
Task::Weaken * "VERSION: 1.04"
Term::ReadKey * "VERSION: 2.31"
Test::Manifest * "VERSION: 1.23"
Test::Simple * "VERSION: 1.001002"
Text::CSV_XS * "VERSION: 1.16"
Try::Tiny * "VERSION: 0.22"
XML::LibXML * "VERSION: 2.0108"
XML::NamespaceSupport * "VERSION: 1.11"
XML::SAX::Base * "VERSION: 1.08"
Solution 6 - Perl
You can try http://search.cpan.org/dist/ExtUtils-Installed">ExtUtils-Installed</a>;, but that only looks in .packlists, so it may miss modules that people moved things into @INC by hand.
I wrote http://search.cpan.org/dist/App-Module-Lister">App-Module-Lister</a> for a friend who wanted to do this as a CGI script on a non-shell web hosting account. You simple take the module file and upload it as a filename that your server will treat as a CGI script. It has no dependencies outside of the Standard Library. Use it as is or steal the code.
It outputs a list of the modules and their versions:
Tie::Cycle 1.15 Tie::IxHash 1.21 Tie::Toggle 1.07 Tie::ToObject 0.03 Time::CTime 99.062201 Time::DaysInMonth 99.1117 Time::Epoch 0.02 Time::Fuzzy 0.34 Time::JulianDay 2003.1125 Time::ParseDate 2006.0814 Time::Timezone 2006.0814
I've been meaning to add this as a feature to the cpan tool, so I'll do that too. [Time passes] And, now I have a -l switch in cpan. I have a few other things to do with it before I make a release, but http://github.com/briandfoy/cpan-script/tree/master">it's in github. If you don't want to wait for that, you could just try the -a switch to create an autobundle, although that puts some Pod around the list.
Good luck;
Solution 7 - Perl
Here a script which would do the trick:
use ExtUtils::Installed;
my $inst = ExtUtils::Installed->new();
my @modules = $inst->modules();
foreach $module (@modules){
print $module ." - ". $inst->version($module). "\n";
}
=head1 ABOUT
This scripts lists installed cpan modules using the ExtUtils modules
=head1 FORMAT
Prints each module in the following format
<name> - <version>
=cut
Solution 8 - Perl
I like to use the CPAN 'r' command for this. You can get into the CPAN shell with the old style:
sudo perl -MCPAN -e shell
or, on most newer systems, there is a 'cpan' command, so this command will get you to the shell:
sudo cpan
(You typically have to use 'sudo' to run it as root, or use 'su -' to become root before you run it, unless you have cpan set up to let you run it as a normal user, but install as root. If you don't have root on this machine, you can still use the CPAN shell to find out this information, but you won't be able to install modules, and you may have to go through a bit of setup the first time you run it.)
Then, once you're in the cpan shell, you can use the 'r' command to report all installed modules and their versions. So, at the "cpan>" prompt, type 'r'. This will list all installed modules and their versions. Use '?' to get some more help.
Solution 9 - Perl
perl -MFile::Find=find -MFile::Spec::Functions -Tlwe 'find { wanted => sub { print canonpath $_ if /\.pm\z/ }, no_chdir => 1 }, @INC'
Solution 10 - Perl
On Linux/Unix I use this simple command:
perl -e 'print qx/find $_ -name "*.pm"/ foreach ( @INC );'
It scans all folder in @INC and looks for any *.pm file.
Solution 11 - Perl
Here's a really hacky way to do it in *nix, you'll get some stuff you don't really care about (ie: warnings::register etc), but it should give you a list of every .pm file that's accessible via perl.
for my $path (@INC) {
my @list = ls -R $path/**/*.pm;
for (@list) {
s/$path///g;
s///::/g;
s/.pm$//g;
print;
}
}
Solution 12 - Perl
You can get list of perl modules installed in you system by using instmodsh command in your terminal.It will ask you three option in order to enhance the output they are:
l - List all installed modules
m <module> - Select a module
q - Quit the program
Solution 13 - Perl
Try the following command
instmodsh
Solution 14 - Perl
All those who can't install perldoc, or other modules, and want to know what modules are available (CPAN or otherwise), the following works for linux and Mingw32/64:
grep -RhIP '^package [A-Z][\w:]+;' `perl -e 'print join " ",@INC'` | sed 's/package //' | sort | uniq
Yes, it's messy. Yes, it probably reports more than you want. But if you pipe it into a file, you can easily check for, say, which dbm interfaces are present:
grep -RhIP '^package [A-Z][\w:]+;' `perl -e 'print join " ",@INC'` | sed 's/package //' | sort | uniq > modules-installed
cat modules-installed | grep -i dbm
AnyDBM_File;
Memoize::AnyDBM_File;
Memoize::NDBM_File;
Memoize::SDBM_File;
WWW::RobotRules::AnyDBM_File;
Which is why I ended up on this page (disappointed)
(I realise this doesn't answer the OP's question exactly, but I'm posting it for anybody who ended up here for the same reason I did. That's the problem with stack*** it's almost imposisble to find the question you're asking, even when it exists, yet stack*** is nearly always google's top hit!)
Solution 15 - Perl
Here's a script by @JamesThomasMoon1979 rewritten as a one-liner
perl -MExtUtils::Installed -e '$i=ExtUtils::Installed->new();
print "$_ ".$i->version($_)."\n" for $i->modules();'
Solution 16 - Perl
The answer can be found in the Perl FAQ list.
You should skim the excellent documentation that comes with Perl
perldoc perltoc
Solution 17 - Perl
Try man perllocal or perldoc perllocal.
Solution 18 - Perl
To walk through the @INC directory trees without using an external program like ls(1), one could use the File::Find::Rule module, which has a nice declarative interface.
Also, you want to filter out duplicates in case previous Perl versions contain the same modules. The code to do this looks like:
#! /usr/bin/perl -l
use strict;
use warnings;
use File::Find::Rule;
my %seen;
for my $path (@INC) {
for my $file (File::Find::Rule->name('*.pm')->in($path)) {
my $module = substr($file, length($path)+1);
$module =~ s/.pm$//;
$module =~ s{[\\/]}{::}g;
print $module unless $seen{$module}++;
}
}
At the end of the run, you also have all your module names as keys in the %seen hash. The code could be adapted to save the canonical filename (given in $file) as the value of the key instead of a count of times seen.
Solution 19 - Perl
I wrote a perl script just yesterday to do exactly this. The script returns the list of perl modules installed in @INC using the '::' as the separator. Call the script using -
perl perlmod.pl
OR
perl perlmod.pl <module name> #Case-insensitive(eg. perl perlmod.pl ftp)
As of now the script skips the current directory('.') since I was having problems with recursing soft-links but you can include it by changing the grep function in line 17 from
grep { $_ !~ '^\.$' } @INC
to just,
@INC
The script can be found here.
Solution 20 - Perl
Here is yet another command-line tool to list all installed .pm files:
Find installed Perl modules matching a regular expression
- Portable (only uses core modules)
- Cache option for faster look-up's
- Configurable display options
Solution 21 - Perl
The following worked for me.
$ perldoc perllocal | grep Module
$ perldoc perllocal | grep -E 'VERSION|Module'
Solution 22 - Perl
the Perl cookbook contains several iterations of a script "pmdesc" that does what you want. Google-search for "Perl Cookbook pmdesc" and you'll find articles on other Q&A Sites, several code listings on the net, a discussion of the solution, and even some refinements.
Solution 23 - Perl
Here's a Perl one-liner that will print out a list of installed modules:
perl -MExtUtils::Installed -MData::Dumper -e 'my ($inst) = ExtUtils::Installed->new(); print Dumper($inst->modules());'
Just make sure you have Data::Dumper installed.
Solution 24 - Perl
cd /the/lib/dir/of/your/perl/installation
perldoc $(find . -name perllocal.pod)
Windows users just do a Windows Explorer search to find it.
Solution 25 - Perl
Try "perldoc -l":
$ perldoc -l Log::Dispatch /usr/local/share/perl/5.26.1/Log/Dispatch.pm
Solution 26 - Perl
As you enter your Perl script you have all the installed modules as .pm files below the folders in @INC so a small bash script will do the job for you:
#!/bin/bash
echo -e -n "Content-type: text/plain\n\n"
inc=`perl -e '$, = "\n"; print @INC;'`
for d in $inc
do
find $d -name '*.pm'
done
Solution 27 - Perl
For Linux the easiest way to get is,
dpkg -l | grep "perl"
Solution 28 - Perl
This works for me
perl -e 'print join("\n",@INC,"")'
Solution 29 - Perl
This is what I do: perl -M{cpan_module}
If you don't receive any errors there is a good chance that the module is installed.