How do I compare two strings in Perl?

How do I compare two strings in Perl?

I am learning Perl, I had this basic question looked it up here on StackOverflow and found no good answer so I thought I would ask.

See perldoc perlop. Use lt, gt, eq, ne, and cmp as appropriate for string comparisons:

>Binary eq returns true if the left argument is stringwise equal to the right argument. > >Binary ne returns true if the left argument is stringwise not equal to the right argument. > > Binary cmp returns -1, 0, or 1 depending on whether the left argument is stringwise less than, equal to, or greater than the right argument. > > Binary ~~ does a smartmatch between its arguments. ... > > lt, le, ge, gt and cmp use the collation (sort) order specified by the current locale if a legacy use locale (but not use locale ':not_characters') is in effect. See perllocale. Do not mix these with Unicode, only with legacy binary encodings. The standard Unicode::Collate and Unicode::Collate::Locale modules offer much more powerful solutions to collation issues.

• cmp Compare

    'a' cmp 'b' # -1
    'b' cmp 'a' #  1
    'a' cmp 'a' #  0
  

• eq Equal to

    'a' eq  'b' #  0
    'b' eq  'a' #  0
    'a' eq  'a' #  1
  

• ne Not-Equal to

    'a' ne  'b' #  1
    'b' ne  'a' #  1
    'a' ne  'a' #  0
  

• lt Less than

    'a' lt  'b' #  1
    'b' lt  'a' #  0
    'a' lt  'a' #  0
  

• le Less than or equal to

    'a' le  'b' #  1
    'b' le  'a' #  0
    'a' le  'a' #  1
  

• gt Greater than

    'a' gt  'b' #  0
    'b' gt  'a' #  1
    'a' gt  'a' #  0
  

• ge Greater than or equal to

    'a' ge  'b' #  0
    'b' ge  'a' #  1
    'a' ge  'a' #  1
  

See perldoc perlop for more information.

( I'm simplifying this a little bit as all but cmp return a value that is both an empty string, and a numerically zero value instead of 0, and a value that is both the string '1' and the numeric value 1. These are the same values you will always get from boolean operators in Perl. You should really only be using the return values for boolean or numeric operations, in which case the difference doesn't really matter. )

In addtion to Sinan Ünür comprehensive listing of string comparison operators, Perl 5.10 adds the smart match operator.

The smart match operator compares two items based on their type. See the chart below for the 5.10 behavior (I believe this behavior is changing slightly in 5.10.1):

###perldoc perlsyn "Smart matching in detail":

The behaviour of a smart match depends on what type of thing its arguments are. It is always commutative, i.e. $a ~~ $b behaves the same as $b ~~ $a . The behaviour is determined by the following table: the first row that applies, in either order, determines the match behaviour.

$a      $b        Type of Match Implied    Matching Code
======  =====     =====================    =============
(overloading trumps everything)

Code[+] Code[+]   referential equality     $a == $b

Any     Code[+]   scalar sub truth         $b−>($a)
Hash    Hash      hash keys identical      [sort keys %$a]~~[sort keys %$b]
Hash    Array     hash slice existence     grep {exists $a−>{$_}} @$b
Hash    Regex     hash key grep            grep /$b/, keys %$a
Hash    Any       hash entry existence     exists $a−>{$b}
Array   Array     arrays are identical[*]
Array   Regex     array grep               grep /$b/, @$a
Array   Num       array contains number    grep $_ == $b, @$a
Array   Any       array contains string    grep $_ eq $b, @$a
Any     undef     undefined                !defined $a
Any     Regex     pattern match            $a =~ /$b/
Code()  Code()    results are equal        $a−>() eq $b−>()
Any     Code()    simple closure truth     $b−>() # ignoring $a
Num     numish[!] numeric equality         $a == $b

Any     Str       string equality          $a eq $b

Any     Num       numeric equality         $a == $b
Any     Any       string equality          $a eq $b

− this must be a code reference whose prototype (if present) is not ""
(subs with a "" prototype are dealt with by the 'Code()' entry lower down)



− that is, each element matches the element of same index in the other
array. If a circular reference is found, we fall back to referential
equality.

! − either a real number, or a string that looks like a number

The "matching code" doesn't represent the real matching code, of course: it's just there to explain the intended meaning. Unlike grep, the smart match operator will short-circuit whenever it can.

Custom matching via overloading You can change the way that an object is matched by overloading the ~~ operator. This trumps the usual smart match semantics. See http://perldoc.perl.org/overload.html"><code>overload</code></a>;.

The obvious subtext of this question is:

> why can't you just use == to check if two strings are the same?

Perl doesn't have distinct data types for text vs. numbers. They are both represented by the type "scalar". Put another way, strings are numbers if you use them as such.

if ( 4 == "4" ) { print "true"; } else { print "false"; }
true

if ( "4" == "4.0" ) { print "true"; } else { print "false"; }
true

print "3"+4
7

Since text and numbers aren't differentiated by the language, we can't simply overload the == operator to do the right thing for both cases. Therefore, Perl provides eq to compare values as text:

if ( "4" eq "4.0" ) { print "true"; } else { print "false"; }
false

if ( "4.0" eq "4.0" ) { print "true"; } else { print "false"; }
true

---

In short:

• Perl doesn't have a data-type exclusively for text strings
• use == or !=, to compare two operands as numbers
• use eq or ne, to compare two operands as text

There are many other functions and operators that can be used to compare scalar values, but knowing the distinction between these two forms is an important first step.

print "Matched!\n" if ($str1 eq $str2)

Perl has seperate string comparison and numeric comparison operators to help with the loose typing in the language. You should read perlop for all the different operators.

And if you'd like to extract the differences between the two strings, you can use String::Diff.

I came looking for a solution where in perl I could compare if A > B or Z < AA. Nothing here worked reliably for me so I came up with my own solution. The tricks is to assign a number for each letter

For example

A=1
B=2
C=3 and so on

Then when time comes to compare if A > B you get the corresponding numbers and compare them in this case 1 > 2

Heres working perl code.

# header
use warnings;
use strict;

#create a hash of letters
my %my_hash_lookup;
my $letter_counter=0;
foreach my $letters ('A'..'ZZ')
{
	#print "$letters \n";
	
	$letter_counter++;
	my $key = $letters;
	my $keyValue = $letter_counter;
	$my_hash_lookup{$key}=$keyValue;
}


my $size = keys %my_hash_lookup;
print "hash size: $size ...\n";

#get number value of string letters
		my $my_hash_value1 = $my_hash_lookup{"A"};
		my $my_hash_value2 = $my_hash_lookup{"B"};
		
		if  ( (defined $my_hash_value1) && (defined $my_hash_value2))
		{

			if ($my_hash_value1 == $my_hash_value2)
			{
				#equal
			}
			elsif ($my_hash_value1 > $my_hash_value2)
			{
				#greater than
				
			}
			elsif ($my_hash_value1 < $my_hash_value2)
			{
				#less than
			}
			
		}