How can I access my localhost from my Android device?
AndroidAndroid Problem Overview
I'm able to access my laptop web server using the Android emulator, I'm using 10.0.2.2:portno
works well.
But when I connect my real Android phone, the phone browser can't connect to the same web server on my laptop. The phone is connected to the laptop using a USB cable. If I run the adb devices command, I can see my phone.
What am I missing?
Android Solutions
Solution 1 - Android
USB doesn't provide network to mobile device.
If both your desktop and phone are connected to the same WiFi (or any other local network), then use your desktop IP address assigned by the router (not localhost
and not 127.0.0.1
).
To find out the IP address of your desktop:
- type into the command line
ipconfig
(Windows) orifconfig
(Unix)- on Linux the one-liner
ifconfig | grep "inet " | grep -v 127.0.0.1
will yield only the important stuff - there's a bunch of suggestions on how to have a similar output on Windows
- on Linux the one-liner
- there's going to be a bunch of IP's
- try all of them (except the forementioned
localhost
and127.0.0.1
)
If your phone is connected to the mobile network, then things are going to be harder.
Either go hardcore:
- first find out your router external IP address (https://www.google.de/search?q=myip)
- then, on the router, forward some port to
<your desktop IP>:<server port number>
- finally use the external IP address and forwarded port
Otherwise use something like xip.io or ngrok.
NOTE: The ifconfig
command has been deprecated and thus missing by default on Debian Linux, starting from Debian stretch. The new and recommended alternative for examining a network configuration on Debian Linux is ip command. For example to use ip command to display a network configuration run the following:
ip address
The above ip command can be abbreviated to:
ip a
If you still prefer to use ifconfig
as part of your daily sys admin routine, you can easily install it as part of the net-tools
package.
apt-get install net-tools
Reference is here
Solution 2 - Android
It is actually quite simple.
- Turn on WiFi Hotspot of your Android phone/router and connect your Laptop to your phone
- Start your server at
localhost
(I am using WAMP server for Windows) - Now open the command prompt and enter
ipconfig
Once you've done that, you will see something like the following:
Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::80bc:e378:19ab:e448%11 IPv4 Address. . . . . . . . . . . : 192.168.43.76 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.43.1
- Copy the IPv4 Address (in this case, it is
192.168.43.76
) - In your mobile browser, simply paste the IPv4 Address
Note: Please set your network as "Home Network". Setting the network as Home Network means that you are allowing your PC to share stuff with other devices on the same network.
If you are using Windows 10, this can be done with the following:
- Open Settings
- Go to Network & Internet
- Select WiFi in the left menu
- Tap on the name of the connected WiFi
- Set the Network Profile of the network to be Private
If you are having an issue, it is most likely to do with Windows Firewall.
- Open Control Panel
- Go to Windows Defender Firewall
- Tap on Allow an app or feature through Windows Defender Firewall
- Check whether the app is enabled for Private networks (there should be a tick)
- If it is not enabled, tap Change settings and tick the checkbox under Private for the app
Solution 3 - Android
With the simple solution (just access laptop_ip_addr:port
from mobile device, when mobile and laptop are on the same WiFi), I get a ERR_CONNECTION_REFUSED error. That is, my MacBook seems to refuse the connection attempt from my mobile.
ADB Reverse Socket (Android only)
This solution works for me (tested with a MacBook):
- Connect Android mobile device with USB cable to laptop
- Enable USB Debugging on mobile device
- On laptop, run
adb reverse tcp:4000 tcp:4000
- Use your custom port number instead of
4000
- Use your custom port number instead of
- Now, on the mobile device, you can navigate to
http://localhost:4000/
, and it will actually connect to the laptop, not the mobile device
See instructions here.
The downside is that this works only with a single mobile device at a time. If you want access with another mobile device, you have to first disconnect the first one (disable USB Debugging), connect the new one (enable USB Debugging), and run adb reverse tcp:4000 tcp:4000
again.
EDIT: this solution has been reported to also work with Windows.
ngrok (works with all devices)
Another solution that should always work is ngrok (as mentioned in other answers). It works over the Internet, and not the local network.
It's extremely easy to use:
brew cask install ngrok
ngrok http 4000
This outputs, among some other information, a line like
Forwarding http://4cc5ac02.ngrok.io -> localhost:4000
Now, you can navigate to http://4cc5ac02.ngrok.io
on any device that is connected to the Internet, and this URL redirects to localhost:4000
of your laptop.
Note that as long as the ngrok command is running (until you hit Ctrl-C), your project is publicly served. Everybody who has the URL can see it.
Solution 4 - Android
Mac OS X users
I achieved this by enabling remote management:
- Ensure that your phone and laptop are connected to the same WiFi network
- On Mac, go to
System preferences/sharing
- Enable remote management
You will see a message similar to this:
- Other users can manage your computer using the address
some.url.com
On your Android device, you should now be able to go to some.url.com
, which delegates to localhost
on your Mac. You can also use ifconfig
to get the IP address of your Mac.
ngrok
(any OS with Node.js)
Portable solution with If you don't mind exposing your project with a temporary domain you can use ngrok
. Lets say I have an app that runs on localhost:9460
I can simply write
npm install ngrok -g
ngrok http 9460
This will give me:
Session Status online Update update available (version 2.2.8, Ctrl-U to update) Version 2.2.3 Region United States (us) Web Interface http://127.0.0.1:4040 Forwarding http://f7c23d14.ngrok.io -> localhost:9460 Forwarding https://f7c23d14.ngrok.io -> localhost:9460Connections ttl opn rt1 rt5 p50 p90 0 0 0.00 0.00 0.00 0.00
I can now reach https://f7c23d14.ngrok.io
as a way to remotely view localhost
. This is great to share design work or progress with clients.
nginx
proxy pass
Alternate solution with If you are running something like this through nginx proxy_pass
it will require a bit more tweaking - this is a hacky approach, but it works for me and I am open to suggestions on improving it:
- Enable remote management (as mentioned above)
- Temporarily set the server to listen on port
81
as opposed to80
- Type in the following command:
sudo nginx -s reload
- Visit
http://youripaddress:81
server {
listen 80;
listen 81; # <-------- add this to expose the app on a unique port
server_name ~^(local|local\.m).example.com$;
# ...
}
Reload and visit http://youripaddress:81
Solution 5 - Android
This solution is usable when your mobile device and computer is not in same network:
You need to use port forwarding in this case. In the Google chrome inspect window (chrome://inspect) You can see the connected devices.
Click on the port fowading button, and set a random port say 3000 to the port which your laptop uses say 8080.
now use localhost:3000 from device to access the localhost:8080(or_whatever_ip:portno) in the laptop. You can check it in the mobile browser. Try localhost:3000 in the mobile browser. Make sure to check the "Enable port forwarding" checkbox in the "Port forwarding settings" window
Solution 6 - Android
I found a quick solution to this problem. Try this link. It should help you fix the problem.
I only changed one thing, where the tutorial states you change '127.0.0.1' to 'All', change it to the IP address your server is running on instead.
After that, you should be able to connect to your localhost.
Below is a (proofread) copy of the information from the linked page:
Step 1
Install the Wamp server (or any other you prefer).
This is one of the best servers I know to set up a local server. If you have installed Apache or any other server, ignore this step.
Download and install Wamp Server from here.
Step 2
Add a new rule for port 80 in Windows Firewall.
-
Open the Control Panel and select Windows Firewall.
-
Select Advanced settings from the left panel of the Windows Firewall setting page.
-
Select Inbound Rules from the left panel, then select New Rule.
-
Select Port and click Next.
-
Select the “Specific local ports” radio button and enter 80 as the port value.
-
Keep Allow the connection unchanged and move to the next step.
-
Keep Profile options unchanged and click Next.
-
Give some nice name to your new rule and click Finish.
This will enable port 80 access on local network IP.
Step 3
Edit the httpd.conf file of the Wamp server to fix the 403 error.
We need to edit this file. Otherwise, we will get the 403 forbidden error when we access the localhost through a local network IP.
-
Click on the Wamp server tray icon.
-
Open Apache server sub menu.
-
Select httpd.conf.
-
Find this section of configuration in the httpd.conf file:
Directory “c:/wamp/www/” # # Possible values for the Options directive are “None”, “All”, # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that “MultiViews” must be named *explicitly* — “Options All” # doesn’t give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks # # AllowOverride controls what directives may be placed in .htaccess files. # It can be “All”, “None”, or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride all # # Controls who can get stuff from this server. # # onlineoffline tag – don’t remove Order Deny,Allow Deny from all Allow from 127.0.0.1
Find and replace ‘127.0.0.1’ with ‘All’, save the file, and restart your Wamp server.
Step 4
Find your local network IP.
-
Open the command prompt.
-
Type and enter the
ipconfig
command. -
In my case, my local area network address is 10.0.0.2.
This is the IP which you need to access your localhost on your Android phone over wifi. To test if it is working, type this IP address in your desktop browser where your localhost server is installed. The browser should display your localhost page successfully. This will assure that this local network IP is now successfully accessible on your Android phone.
I hope this tutorial will help you to access your localhost over wifi.
Solution 7 - Android
On Windows PC You may not need to do anything else than finding out your IPv4 Address using "ipconfig" command.
- Step 1 : Connect your phone to PC using USB cable.
- Step 2 : Use command 'ipconfig' to find out your IPv4 Address (External IP of the Router) e.g 192.168.1.5 in my case.
- Step 3: Just access "192.168.1.5:8080" from your phone browser. It works !
Other Env Details : Windows 7, Google Nexus 4 (4.2.2), Tomcat Server, Grails Application.
You should also make sure that you have the permission to access internet in AndroidManifest file :
<uses-permission android:name="android.permission.INTERNET"/>
Solution 8 - Android
There is however a far better solution. You can access your host machine with the IP address "10.0.2.2". This has been designed in this way by the Android team. So your webserver can perfectly run at localhost and from your Android app you can access it via "http://10.0.2.2:8080";.
Solution 9 - Android
As this is an old question, there is a new way to do this that is really really simple. Download the ADB Chrome Extension and then follow these instructions:
https://developers.google.com/chrome-developer-tools/docs/remote-debugging
Solution 10 - Android
"Port forwarding on Chrome for Android makes it easy to test your development site on mobile. It works by creating a listening TCP port on your mobile device that maps to a particular TCP port on your development machine. Traffic between these ports travels through USB, so the connection doesn't depend on your network configuration."
More details here: https://developer.chrome.com/devtools/docs/remote-debugging#port-forwarding
Solution 11 - Android
Run CMD as administrator
and on CMD screen type ipconfig and the screen will appear with text
as this photo
and you can access your localhost using this ip you have to be connected to same network as your pc connected to
Solution 12 - Android
Solution for Windows:
> You are not able to view your website, mainly because your firewall ( > default OS firewall or Antivirus firewall ) is preventing incoming > connections.
On Windows Firewall:
To allow incoming connections on specific ports, go to:
> Control Panel > Windows Defender Firewall > Advanced Settings > Right > Click Inbound Rules > Add New Rule. > > Then : > 1. Select "Port" radio button. > 2. Enter the specific port / range you on which you want to enable incoming connections ( the port on which your server is running ) > 3. Select "Allow the connection" radio button. > 4. Click Next ( unless you want to change the defaults ) > 5. Give your rule a name and click Finish.
Note:
If you are using an Antivirus having a firewall, then the above steps will not work since the Antivirus would have disabled Windows firewall and instead runs its own firewall.
In that case, depending on the Antivirus program, go to your Antivirus's Firewall settings and open the port.
Solution 13 - Android
Try going to this file:
C:\wamp\bin\apache\Apache2.2.11\conf\httpd.conf
# onlineoffline tag - don't remove
Order Deny,Allow
Allow from all // change it Deny
Allow from 127.0.0.1
And change 10.0.2.2 to your IP address.
Solution 14 - Android
You may have your web server listening on your loopback interface and not on your network interface. Major signs of this are:
- Hits on
127.0.0.1
andlocalhost
(from localhost or Android emulator) work - Hits on
192.168.xxx.xxx
do not work, whether from localhost, LAN, or WAN
I talk more about diagnosing this and fixing this in an answer here.
Solution 15 - Android
Use this in your ubuntu/Macbook to get the ip address of your system. Your mobile and system should be in the same network
ip addr | grep inet
This will give you an ip address which looks like 192.168.168.46
. Use this in your smartphone.
Hope this helps.
Solution 16 - Android
I used this process:
- Install http://www.telerik.com/fiddler">Fiddler</a> on the PC
- Set up PC and Android device following these http://www.cantoni.org/2013/11/06/capture-android-web-traffic-fiddler">excellent instructions
- Simply go to the browser on the Android device and type in http://ipv4.fiddler to access the localhost
Solution 17 - Android
finally done in Ubuntu , i am running nodejs server on localhost:8080
-
open terminal type ifconfig you will get ip something like this : inet addr:192.168.43.17
-
now simply put url address like this : "192.168.43.17:8080" (8080 port coming from localhost port number) ex : "192.168.43.17:8080/fetch"
Solution 18 - Android
The easier way to default localhost is to use http://localhost:port. This works in a laptop and Android as well.
If it does not work, then in android set the default IP of your phone to 127.0.0.1:port :)
Open terminal and type :-
hostname -i
#127.0.0.1
hostname -I
#198.168.*.*
Solution 19 - Android
If you are using a real device and still facing the problem, follow these steps as these steps help me to solve the issue:
- Make sure both the mobile device and the laptop are on the same WiFi network.
- verify your targeted URL has a port number, something like this:
https://localhost:44301
- run this command on the Android Studio terminal,
adb reverse tcp:44301 tcp:44301
- replace
44301
with yourport number
Hopefully, you will be able to run without any issue.
Happy codding
Solution 20 - Android
ngrok lets you put your localhost onto a temporary server and is very simple to set up. I've provided some steps here that can be found in the link:
- Download the ngrok zip from the link above
- Open the zip
- Run your server locally and take note of the port number
- In the terminal, go to the folder where ngrok lives and type
ngrok http [port number]
You'll see a little dashboard in your terminal with an address pointing to your localhost. Point your app to that address and build to your device.
Solution 21 - Android
This is what worked for me, I added another line after the 127.0.0.1 ip to specify the exact local network ip address (not the public ip address) of the device I wanted to use. In my case my Samsung Galaxy S3
As suggested by Bangptit edit the httpd.conf file (x being the version numbers): C:\wamp\bin\apache\Apache2.x.x\conf\httpd.conf
Search for the onlineoffline tag and add the ip of your phone (I found my phones ip address in my routers configuration pages):
onlineoffline tag - don't remove
Order Deny,Allow
Deny from all
Allow from 127.0.0.1
my phones ip in the line below
Allow from 192.168.1.65
Allow from ::1
Allow from localhost
One could extend this to include an entire sub domain too for e.g. 192.168.1.0/24 etc
Solution 22 - Android
A solution to connect my mobile device to my wamp server based on my laptop:
First, wifi is not a router. So to connect my mobile device to my wamp server based on localhost on my laptop, I need a router. I have downloaded and installed a free virtual router: https://virtualrouter.codeplex.com/
Configuring it is really simple:
- right click on virtual router icon in System Tray
- click on Configure virtual router
- fill a password
- if your internet connection is in ethernet, choose Shared connection : Ethernet
- Then set wifi on on your laptop and device
- On your device connect to the virtual router network name
Then you can connect to your laptop via your device by launching a browser and fill the IPV4 address of your laptop (to find it on windows, type in cmd : ipconfig, and find ipv4 address)
You should see your wamp server home page.
Solution 23 - Android
Was running into this problem using several different localhost servers. Finally got my app up and running on the phone in seconds just by using the Python simple server. It only takes a few seconds so is worth a try before getting into any more complicated solutions. First, make sure you have Python installed. cmd+r
and type python
for Windows or $ python --version
in mac terminal.
Next:
cd <your project root>
$ python -m SimpleHTTPServer 8000
Then just find the address of your host machine on the network, I used System Preferences/Sharing
on mac to find it. Tap that into your Android device and should load your index.html
and you should be good.
If not then the problem is something else and you may want to look into some of the other suggested solutions. Good luck!
*** EDIT ***
Another quick solution to try if you're using Chrome is the Web Server for Chrome extension. I found it a quick and super easy way to get access to localhost on my phone. Just make sure to check Accessible to local network
under the Options
and it should work on your cell without any problem.
Solution 24 - Android
First of all connect your phone and computer to common wifi.
Then, open command prompt using run as administrator
Give ipconfig command
Which shows wireless lan ip
Use ip:port of your server to access in phone
Solution 25 - Android
EASIEST way (this worked flawlessly for me) is to locally host your site at 0.0.0.0:<port_no>
and to access it using mobile devices, use <local_ipv4_address>:<port_no>/<path>
in browser.
- To know your local ipv4 address, just type
ipconfig
in cmd - ANY device connected to the SAME network can access this url.
Solution 26 - Android
Ngrok is the best solution.
If you're developing PHP then I recommend installing Laravel Valet, It has MacOS and Linux versions, then you may use valet share
command. If you're developing any frontend tech and need to share a port like 3000 then use ngrok directly ngrok http 3000
Xampp & ngrok
You can also use ngrok with Xampp in Windows. You can use following process. It's quite easy and simple.
Note the port your Apache server is running on. It's 80 in my case
Now you can use this Forwarding link on any device (i.e. your physical android devices) and it will be hosting your localhost server. For example,
Replace
http://localhost/my-files/
with
http://YOUR_FORWARDING_ADDRESS/my-files/
Solution 27 - Android
First of all make your machine(where server is running)IP address static. Enter this static IP address in the android code.
Next go to your wifi router's interface and check the left panel. You will see option such as port forwarding/forwarding. Click on it and forward port 80.
Now edit your htttpd.conf
file and edit it for
Allow from All
. Restart your server. Everything should work fine now.
Additionally you can reserve the IP address of your machine so that it is always allocated to you.
In the left panel of your router's interface, find DHCP -> Address Reservation
, click on it. Enter your machine's MAC address and the IP address you have entered in the code. Click on save. This will reserve the given IP address for your machine.
Solution 28 - Android
Adding a solution for future developers.
Copy address of your ip address. right click on your network -> network and sharing-> click on the connection you currently have-> details-> then the address beside ipv4 address is your ip address, note this down somewhere
Go to control panel -> system and security -> windows firewall -> advanced settings -> inbound rules -> new rules (follow the steps to add a port e.g 80, its really simple to follow)
put your ip address that you noted down on your phone browser and the port number you created the rule for beside it. e.g 192.168.0.2:80 and wala.
Possible solution if it doesn't connect. right click network->open network and sharing-> look under view your active connections, under the name of your connection at the type of connection and click on it if it is public, and make sure to change it to a home network.
Solution 29 - Android
Although one answer has been accepted but this worked for me:
-
Make sure both your computer and android device are on same network.
-
get your computer's ip address. (in case of mac type
ifconfig
inside terminal and look foren0/en1 -> inet
it should be something like19*.16*.1.4
.) (on windows, use `ipconfig) -
Open your mobile settings and go to network-> long press your wifi network-> modify network -> scroll down to advanced options -> chose proxy manual and in proxy hostname type your address i.e.
19*.16*.1.4
inside port enter your port. and save it. -
search for
what is my ip
in google chrome, and get your ip, lets say it is1**.1**.15*.2**
-
try accessing
1**.1**.15*.2**:port/
from your mobile device.
It is as simple as this.
Solution 30 - Android
What worked for me ( target: debug an windows server app running on localhost:99999 from an client app running on android phone )
- phone and pc connected on the same network e.g. 192.168.1.xxx ( connected via wifi in my case)
- enable port 99999 in windows firewall
- run in cmd as administrator: netsh http add urlacl url=http://*:99999/ user=Everyone
then the service app url (my_dev_machine_ip:99999/path_to_service) was accessible from the phone.
Solution 31 - Android
its very simple , - GOTO command line (Window + R [type cmd]) - type ipconfig , that will show the current IP address of your PC - write taht IP address on your Android Phone's browser with :80 e.g (http://192.168.x.x:80)
Done
localhost will appear on your Phone
Solution 32 - Android
Simple. First and foremost make your your android device and computer is connected on thee same network.e.g router Open command prompt by windows+R and search for cmd then open. On the command type ipconfig and get the ipv4 address.
NB: Firewall blocks access of your computer along network so you need to turn off firewall for the network if either public or private.
How to turn off firewall Open control panel > System and security > windows firewall > on the left pane select turn on and off windows firewall. > Then select turn off windows firewall(not recommended)
You are done
then open your mobile device and run your ip address 192.168.1.xxx
Solution 33 - Android
Another thing to check is that some routers have issues bridging the requests when both 2.4G and 5G are enabled and the devices are on different frequencies. Trying disabling one of the frequencies so both devices are connected to the same interface.
Solution 34 - Android
Building on Ilya Saunkin's answer, here's a command that should output your IP address formatted as a hyperlink - just substitute 3000 for whatever your port number is:
ifconfig | grep "inet " | grep -v 127.0.0.1 | sed 's/netmask.*//g' | sed 's/inet//g' | awk '{print "http://"$1":3000/"}'
Depending on where you're running the command, you should be able to (on a Mac) hold the command key and click/double-click to open the links.
Solution 35 - Android
Using a USB cable:
(for example, if you use WAMP server):
-
Install your Android drivers on your PC and download portable Android Tethering Reverse Tool and connect your Android device through the Reverse Tool application.
-
Click on WAMP icon > Put Online (after restarting).
-
Open your IP in the Android browser (i.e.
http://192.168.1.22
ORhttp://164.92.124.42
)
To find your local IP address, click Start>Run>cmd and type ipconfig and your IP address will show up in the output.
That's all. Now you can access (open) localhost from Android.
Solution 36 - Android
use connectify
and xampp
or equivalent, and type ip address on mobile URL bar to access
Solution 37 - Android
Personally I do not insist to use localhost when using device, there is no easy solution.
Just start the activity where you connect to localhost where you can use emulator. Whatever info you have to get from device can be generated with ease and can be sent to activity as parameter.
Solution 38 - Android
On linux use ip addr
instead of ifconfig
since ifconfig
is deprecated for many years and not installed by default in recent distros
Solution 39 - Android
The above didn't work for me. This did for Mac:
In terminal:
ifconfig
Then take the number after inet and put it in your mobile browser:
Solution 40 - Android
On mac run this command in the terminal if you have your server in 8080
echo "
rdr pass inet proto tcp from any to any port 8080 -> 127.0.0.1 port 8080
" | sudo pfctl -ef -
Solution 41 - Android
Having a netconfig xml and assign it in the manifest.xml is the best work around. This will bypass the androids default https only contraint.
Solution 42 - Android
while creating apps , debugging or rendering using mobile is helpful. The system localhost can be accessed using mobile with the IPv4 address with the port number. It should be noted, to achieve this, both the devices should be connected to the same wifi or network and the machines network should be private.
Solution 43 - Android
If you're running on Linux this works for me
sudo iptables -F