You need to find what your **local network&#39;s IP** of that computer is. 
Then other people can access to your site by that IP.

You can find your local network&#39;s IP by go to **Command Prompt** or press **&lt;kbd&gt;Windows&lt;/kbd&gt; + &lt;kbd&gt;R&lt;/kbd&gt;** then type in `ipconfig`. It will give out some information and your local IP should look like **192.168.1.x**.

localhost is a special hostname that almost always resolves to 127.0.0.1. If you ask someone else to connect to `http://localhost` they&#39;ll be connecting to their computer instead or yours.

To share your web server with someone else you&#39;ll need to find your IP address or your hostname and provide that to them instead. On windows you can find this with `ipconfig /all` on a command line.

You&#39;ll also need to make sure any firewalls you may have configured allow traffic on port 80 to connect to the WAMP server.

Since Ubuntu 13.10 no longer has ia32-libs I cannot get my android development environment running on a clean install of 13.10.

The error is ~/android-studio/sdk/build-tools/android-4.2.2/aapt&quot;: error=2, No such file or directory

This file does exist and is executable but it is a 32bit executable.

In previous installs I just installed ia32-libs to fix this but this solution no longer works for Ubuntu 13.10.

I have tried solutions proposed by askubuntu questions eg. this one https://askubuntu.com/questions/107230/what-happened-to-the-ia32-libs-package

but it isn&#39;t working for me. 
From that askubuntu.com answer I see I should install separate packages with 

    sudo apt-get install package:i386 

but I don&#39;t know which packages to install to make the android tools work again.

Has anyone else solved this problem and or does anyone have a list of packages which need to be installed for the android tools?

How to make Android&#39;s aapt and adb work on 64-bit Ubuntu without ia32-libs (works for versions 12, 13 and 14)

I am doing the following using attribute contains selector [$(&#39;\[attribute*=value\]&#39;)][1]

    &lt;input name=&quot;man-news&quot;&gt;
    &lt;input name=&quot;milkMan&quot;&gt;

    &lt;script&gt;    
        $( &quot;input[name*=&#39;man&#39;]&quot;).css(&quot;background-color:black&quot;);
    &lt;/script&gt;

This works for the 1st input but not the second input as &quot;**Man**&quot; has a capital &quot;**M**&quot;

How can I make `$( &quot;input[name*=&#39;man&#39;]&quot;)` an case insensitive selector?


  [1]: http://api.jquery.com/attribute-contains-selector/

Case insensitive jQuery attribute selector

I just recently downloaded WAMP Server to view and edit php webpages but now I would also like other people in my network (connected to the same wifi) to be able to access localhost and all the files that I have saved. I have already tried to access localhost and my WAMP server was already online, however that didn&#39;t work. Can someone help me out? Thanks in advance!

How can I access localhost from another computer in the same network?

<p>I just recently downloaded WAMP Server to view and edit php webpages but now I would also like other people in my network (connected to the same wifi) to be able to access localhost and all the files that I have saved. I have already tried to access localhost and my WAMP server was already online, however that didn't work. Can someone help me out? Thanks in advance!</p>


I know for linux and Unix machines there is emacs and vi text editor and gcc is built in to compile c code?  what would be the Windows text editor in cmd and are there any compilers built in?


Basic text editor in command prompt?

I want to make a .bat file that when opened will copy a folder and all it contains into another folder on another partition. Here is exactly what I am trying to do:

Copy `C:\Documents and Settings\user\Desktop\Документи` and all it contains to `D:\Backup`. I have tried with many [`xcopy`](http://ss64.com/nt/xcopy.html) commands but without result. Thanks.

I launched the command prompt with `/k` and saw this

[![pic](https://i.stack.imgur.com/RIPco.png)](http://i41.tinypic.com/m9blns.png)

which made me think there is a problem with the font. I installed new font that should fix this (`YGP_NT`) but I am having the same problem (yes, I changed it from the cmd Properties, edited the TrueTypeFont with regedit and restarted the PC). I can write in cyrillic in the cmd if that can help.

How to copy a folder via cmd?

I am writing a pyqt application which require to execute admin task. I would prefer to start my script with elevate privilege. I am aware that this question is asked many times in SO or in other forum. But the solution people are suggesting is to have a look at this SO question
https://stackoverflow.com/questions/130763/request-uac-elevation-from-within-a-python-script

However, I am unable to execute the sample code given in the link. I have put this code on top of the main file and tried to execute it. 

    import os
    import sys
    import win32com.shell.shell as shell
    ASADMIN = &#39;asadmin&#39;
    
    if sys.argv[-1] != ASADMIN:
        script = os.path.abspath(sys.argv[0])
        params = &#39; &#39;.join([script] + sys.argv[1:] + [ASADMIN])
        shell.ShellExecuteEx(lpVerb=&#39;runas&#39;, lpFile=sys.executable, lpParameters=params)
        sys.exit(0)
    print &quot;I am root now.&quot;

It actually ask permission to elevate but print line never get executed. Somebody can help me to run the above code successfully. Thanks in advance.

How to run script with elevated privilege on windows

I made a rails project with,

    rails new test_bootstrap.

succeeded.

moved to the project dir and added the gems

    gem &quot;therubyracer&quot;
    gem &quot;less-rails&quot; #Sprockets (what Rails 3.1 uses for its asset pipeline) supports LESS
    gem &quot;twitter-bootstrap-rails&quot;


and run 

    bundle install


after that, i have this error.


    Installing libv8 (3.16.14.3)
    Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension.
    
    c:/RailsInstaller/Ruby1.9.3/bin/ruby.exe extconf.rb
    creating Makefile
    지정된 경로를 찾을 수 없습니다.                                                          지정된 경로를 찾을 수
    없습니다.                                                          지정된 경로를 찾을 수 없습니다.
                                                          
    c:/RailsInstaller/Ruby1.9.3/lib/ruby/ge
    ms/1.9.1/gems/libv8-3.16.14.3/ext/libv8/builder.rb:58:in `setup_python!&#39;: libv8 requires
    python 2 to be installed in order to build, but it is currently not available (RuntimeErr
    or) from c:/RailsInstaller/Ruby1.9.
    3/lib/ruby/gems/1.9.1/gems/libv8-3.16.14.3/ext/libv8/builder.rb:42:in `block in build_lib
    v8/builder.rb:42:in `block in build_libv8!&#39;
            from c:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/libv8-3.16.14.3/ext/lib
    v8/builder.rb:40:in `chdir&#39;
            from c:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/libv8-3.16.14.3/ext/lib
    v8/builder.rb:40:in `build_libv8!&#39;
            from c:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/libv8-3.16.14.3/ext/lib
    v8/location.rb:24:in `install!&#39;
            from extconf.rb:7:in `&lt;main&gt;&#39;                                                    
    
    
    Gem files will remain installed in c:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/l
    ibv8-3.16.14.3 for inspection.
    Results logged to c:/RailsInstaller/Ruby1.9.3/lib/ruby/gems/1.9.1/gems/libv8-3.16.14.3/ex
    t/libv8/gem_make.out
    An error occurred while installing libv8 (3.16.14.3), and Bundler cannot
    continue.
    Make sure that `gem install libv8 -v &#39;3.16.14.3&#39;` succeeds before bundling.

sorry for some Koreans. It says, It can&#39;t find the chosen path or something like that.

and i tried to run this command 

    gem install libv8 -v &#39;3.16.14.3&#39; 

throwing the same error.

Error installing libv8: ERROR: Failed to build gem native extension

I&#39;ve installed Chocolatey, but I would like it to install programs to another drive instead of C. C is only a small SSD, but I have other drives where I usually install programs to.

Any ideas?


How do I set Chocolatey to install applications onto another drive?

My simple Django app worked fine in debug mode (`manage.py runserver`), and works under WSGI+Apache on my dev box, but when I pushed to EC2 I began receiving intermittent (10-80% of the time) errors of `Bad Request (400)` for any URLs I try to view (whether in my app or in the Django admin.

Where can I find debug information about this? Nothing appears in `/var/log/apache2/error.log`, even with `LogLevel=info`. I have checked versions, logged the Request environment (cf. [ModWSGI Debugging Tips](https://code.google.com/p/modwsgi/wiki/DebuggingTechniques#Displaying_Request_Environment)) and see no major differences.

The one remaining thought I had is, I&#39;m using the mod_wsgi from Ubuntu 12.04 (libapache2-mod-wsgi 3.3-4build1) which was built against Python 2.7.1; I have Python 2.7.3. And Django is 1.6, which is newer than the Ubuntu Precise version. I hesitate to start building packages from source since it&#39;s so hard to clean up and these seem like minor version changes...

**Thank you for your help.**


*(For reference, here are the Apache config and WSGI apps)*

### Apache config (000-default)

    &lt;VirtualHost *:80&gt;
        ServerAdmin webmaster@localhost
        DocumentRoot /var/www
        WSGIScriptAlias /rz /usr/local/share/rz/rz.wsgi
        ...


### rz.WSGI app

    import os
    import sys
    import django.core.handlers.wsgi
    import pprint

    path = &#39;/usr/local/share/rz&#39;
    if path not in sys.path:
    	sys.path.insert(0, path)
    
    os.environ[&#39;DJANGO_SETTINGS_MODULE&#39;] = &#39;rz.settings&#39;
    
    class LoggingMiddleware:
    	def __init__(self, application):
    		self.__application = application
    
    	def __call__(self, environ, start_response):
    		errors = environ[&#39;wsgi.errors&#39;]
    		pprint.pprint((&#39;REQUEST&#39;, environ), stream=errors)
    
    		def _start_response(status, headers, *args):
    			pprint.pprint((&#39;RESPONSE&#39;, status, headers), stream=errors)
    			return start_response(status, headers, *args)
    
    		return self.__application(environ, _start_response)
    
    application = LoggingMiddleware(django.core.handlers.wsgi.WSGIHandler())

Debugging Apache/Django/WSGI Bad Request (400) Error

On my mac I&#39;ve got php installed and working fine. I recently wanted to install mcrypt, so I did so using brew. Although it seemed to install fine, it doesn&#39;t show up in my phpinfo(). So I think that the php that brew installed mcrypt in, isn&#39;t the php that apache uses.

Does anybody know how I can:

 1. check whether there is a difference between the php installed by brew and the php which Apache uses?
 2. make apache use the php that brew installed?

All tips are welcome!

How to use the php that brew installed?

I have been trying to figure out how to fix this problem for two days. I&#39;m new to this kind of thing so I would appreciate it if someone could tell me how to fix it.

I&#39;ve tried deleting skype but that didn&#39;t work, I&#39;ve tried turning off the world wide web thing off, IIS off nothing seems to work.


    12:51:22 PM  [Apache] 	Problem detected!
    12:51:22 PM  [Apache] 	Port 80 in use by &quot;Unable to open process&quot; with PID 4!
    12:51:22 PM  [Apache] 	Apache WILL NOT start without the configured ports free!
    12:51:22 PM  [Apache] 	You need to uninstall/disable/reconfigure the blocking application
    12:51:22 PM  [Apache] 	or reconfigure Apache and the Control Panel to listen on a different port



XAMPP - Port 80 in use by &quot;Unable to open process&quot; with PID 4! 12

&quot;Pretty links&quot; is an often requested topic, but it is rarely fully explained. [mod_rewrite][1] is one way to make &quot;pretty links&quot;, but it&#39;s complex and its syntax is very terse, hard to grok, and the documentation assumes a certain level of proficiency in HTTP. Can someone explain in simple terms how &quot;pretty links&quot; work and how mod_rewrite can be used to create them?

Other common names, aliases, terms for clean URLs: [RESTful][2] URLs, user-friendly URLs, [SEO][3]-friendly URLs, [slugging][4], and MVC URLs (probably a misnomer)

  [1]: https://en.wikipedia.org/wiki/URL_redirection#Apache_HTTP_Server_mod_rewrite
  [2]: http://en.wikipedia.org/wiki/Representational_state_transfer#RESTful_web_services
  [3]: http://en.wikipedia.org/wiki/Search_engine_optimization
  [4]: https://en.wikipedia.org/wiki/Clean_URL#Slug


Reference: mod_rewrite, URL rewriting and &quot;pretty links&quot; explained

I have ``cmsplus.dev`` under ``/etc/apache2/sites-available`` with the following code,

    &lt;VirtualHost *:80&gt;
    	ServerAdmin master@server.com
    	ServerName www.cmsplus.dev
    	ServerAlias cmsplus.dev
    	
    	DocumentRoot /var/www/cmsplus.dev/public
    
    	LogLevel warn
    	ErrorLog /var/www/cmsplus.dev/log/error.log
    	CustomLog /var/www/cmsplus.dev/log/access.log combined
    &lt;/VirtualHost&gt;

Now when I use ``sudo /usr/sbin/a2ensite cmsplus.dev``, I am getting the error,

    ERROR: Site cmsplus.dev does not exist!

My webserver ``Apache/2.4.6 (Ubuntu)``

How to solve this issue?

Site does not exist error for a2ensite

I&#39;m using WAMP Server 2.2 on a PC. In phpMyAdmin (version 5.5.24) I edited the &#39;root&#39; user (with &#39;localhost&#39; host) and gave it a password of &#39;root&#39;. This turned out to be a big mistake that I&#39;m trying to revert. Now when I go to **localhost/phpmyadmin/** I get the menu of databases on the left, but the main frame has an error that reads:

    #1045 - Access denied for user &#39;root&#39;@&#39;localhost&#39; (using password: NO)
    phpMyAdmin tried to connect to the MySQL server, and the server rejected the 
    connection. You should check the host, username and password in your 
    configuration and make sure that they correspond to the information given 
    by the administrator of the MySQL server.

If I go to **127.0.0.1/phpmyadmin**, I do *not* get the error and everything works fine.

I tried changing the user&#39;s password back to no password; I tried modifying config.inc.php file to add the new password (but that made phpMyAdmin error-out completely); I tried removing and recreating the root/localhost user. Nothing seems to work. The root/localhost user appears to have no password and all privileges, but the error remains.

Any ideas or how I can get this user&#39;s access back to normal without having to reinstall WAMP?

Fix Access denied for user &#39;root&#39;@&#39;localhost&#39; for phpMyAdmin

I am new to symfony2 and reading [symblog][1]. In third chapter while trying with data-fixtures I tried the command: 

`php composer.phar update` 

but I got the error: 

`Could not open input file: composer.phar`

So I googled a little and tried 

    php composer.phar install

but still getting the same error. So please guide how to deal with this composer to install new extentions or bundles like data-fixtures in symfony2 using wamp.

  [1]: http://tutorial.symblog.co.uk/#tutorial-parts

Running Composer returns: &quot;Could not open input file: composer.phar&quot;

I am installing the Wamp Server on another computer to run a mid-sized database and UI. I have been successful in blocking IIS and routing the server to Localhost:8080. But whenever I try to access on of my projects from the localhost homepage, in the www file; I get redirected to a Page not found error. 

When I hover above the links the directory always comes up &quot;http:// ProjectFolderNameHere /&quot;. when it&#39;s supposed to be &quot;http:// LocalHost:8080 / ProjectFolderNameHere /&quot;. What can I do to get the links working properly?

My Machine runs on Windows 7 Home Edition 64-bits, and I already have Microsoft&#39;s IIS disabled.

Project Links do not work on Wamp Server

First of all, I read at least 20 articles about this topic, and not one of them can match up the scenario and I screwed up the process numerous times. So I turn help by offering my specific scenario if any help will be appreciated.

Laptops or other devices are connected through a wireless router.

I&#39;ve tried:

- Enable Port 80 on firewall. nothing happened.
- Run `ping`, `ipconfig` and tried IPv4 address there, denied access or bring me to verizon (my ISP), router config page.
- Tried config Apache, was a mess, never get all the authorization setup in numerous posts and tried one of promising one, which crashed my WAMP, have to went through all the trouble and reinstall.

What I really tried to accomplish is really simply allow all users connect to that wireless router be able to acces my Win8 hosted WAMP sites.

I wonder if there is any specific steps that I can walk through to make it really work?

WAMP 2.4 on Win8.1.
Laptop host local sites.

How to enable local network users to access my WAMP sites?

WAMP won&#39;t turn green. It was working fine a couple of weeks ago. When looking at other answers on this topic, a lot said to install services in Apache.

When I do this, I get an error code stating:

&gt; &quot;The program can&#39;t start because VCRUNTIME140.dll is missing from your computer. Try reinstalling the program to fix the problem.&quot;


WAMP won&#39;t turn green. And the VCRUNTIME140.dll error

I know this question has been asked a lot of times 

I followed Most of the answers in the internet But I still get the same Message

&gt; 403 Forbidden
&gt; 
&gt; You don&#39;t have permission to access / on this server.


It is weird that when I access using the same PC to **`localhost:1234`** it runs normally but if I access using my IP address **`192.168.0.188:1234`** 

Also which is really weird is that I tried to install WAMP on other PC and without any configuration I could access to that PC.

So I thought it&#39;s because McAfee and Firewall so I open port on Widows and McAfee and nothing changed also I turned off Firewall and still nothing change.

Then for no reason I opened  port through the Router “port forwarding” and still nothing changed.

I don&#39;t think that it&#39;s because my configuration in WAMP since I am still able to get this `403 Forbidden` Message and also by using other PC without any configuration I could access it.

***Both PCs are setup like this:***

**Windows 8 Pro**

 - **WAMP Wampserver:** 2.4 
 - **Apache Version:** 2.4.4  
 - **PHP Version:** 5.4.12  
 - **MySQL Version:** 5.6.12  

The accessible PC uses *Microsoft Security Essentials*.

The inaccessible PC uses *McAfee Internet Security*.

I tried to turn **off WAMP** and **start IIS** For Microsoft Server (I works perfectly From any PC) but WAMP is still not not working

I followed these tutorial: 

 - [How to Access WAMP Server in LAN or WAN][1]
 - [Install &amp; Setup Virtual Host Guide for WAMP][2]
 - [Install &amp; Setup LAN &amp; Worldwide Access Guide for WAMP][3]

And the Stack Overflow answers here: 

 - [Cannot access wamp server on local network][4]
 - [WAMP 403 Forbidden message on Windows 7][5]


  [1]: http://www.codeproject.com/Tips/395286/How-to-Access-WAMP-Server-in-LAN-or-WAN
  [2]: http://guides.jlbn.net/setvh/setvh1.html
  [3]: http://guides.jlbn.net/setaccess/setaccess1.html
  [4]: https://stackoverflow.com/questions/8219062/cannot-access-wamp-server-on-local-network
  [5]: https://stackoverflow.com/questions/8204902/wamp-403-forbidden-message-on-windows-7

WAMP Cannot access on local network 403 Forbidden

I&#39;ve re-installed WAMP multiple times, searched literally hundreds of pages, and its not fixed this issue:

![enter image description here][1]

I&#39;ve looked inside the phpmyadmin config files, set:

    $cfg[&#39;Lang&#39;] = &#39;en-utf-8&#39;;

Uninstalled multiple times (as mentioned) and seemed to have no luck what so ever. Any help would be appreciated. 


  [1]: http://i.stack.imgur.com/slrfD.png

Content Type	Original Author	Original Content on Stackoverflow
Question	user2735791	View Question on Stackoverflow
Solution 1 - Windows	Tri Hoang	View Answer on Stackoverflow
Solution 2 - Windows	Jonathan K	View Answer on Stackoverflow

How can I access localhost from another computer in the same network?

Windows Problem Overview

Windows Solutions

Solution 1 - Windows

Solution 2 - Windows

Case insensitive jQuery attribute selector

How to make Android's aapt and adb work on 64-bit Ubuntu without ia32-libs (works for versions 12, 13 and 14)

Attributions