`docker-credential-gcloud` not in system PATH

After the latest updates to gcloud and docker I'm unable to access images on my google container repository. Locally when I run: gcloud auth configure-docker as per the instructions after updating gcloud, I get the following message:

WARNING: `docker-credential-gcloud` not in system PATH.
gcloud's Docker credential helper can be configured but it will not work until this is corrected.
gcloud credential helpers already registered correctly.

Running which docker-credential-gcloud returns docker-credential-gcloud not found.

I have no other gcloud-related path issues and for the life of me can't figure out how to install/add docker-credential-gcloud to path. Here's what I have installed (shown via gcloud version):

Google Cloud SDK 197.0.0
beta 2017.09.15
bq 2.0.31
container-builder-local
core 2018.04.06
docker-credential-gcr
gsutil 4.30

I also have Docker CE Version 18.03.0-ce-mac60 (23751).

Here's my $PATH:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin

I also ran source /usr/local/Caskroom/google-cloud-sdk/latest/google-cloud-sdk/path.zsh.inc on original gcloud install.

Notice: All docker-credential-gcr below can be replaced with docker-credential-gcloud. I think it is just different versions of gcloud, I might be wrong.

I used Homebrew Cask to install gcloud too. I installed docker-credential-gcr with

$ gcloud components install docker-credential-gcr

And then like you said, which docker-credential-gcr doesn't gave you anything.

So I ran which gcloud to find there is a symlink to gcloud in /usr/local/bin. This symlink is created by Homebrew when you installed gcloud at first place. Now docker-credential-gcr wasn't installed by Homebrew but by gcloud itself, so there isn't a symlink.

I called readlink /usr/local/bin/gcloud and found out gcloud is installed in /usr/local/Caskroom/google-cloud-sdk/latest/google-cloud-sdk/bin/.

Then:

$ ls /usr/local/Caskroom/google-cloud-sdk/latest/google-cloud-sdk/bin

There you should see docker-credential-gcr listed there.

I simply linked it to /usr/local/bin:

$ ln -s \
    /usr/local/Caskroom/google-cloud-sdk/latest/google-cloud-sdk/bin/docker-credential-gcr \
    /usr/local/bin/

Then run:

$ docker-credential-gcr configure-docker

It should succeed.

Just had the same issue on Windows, running Docker with Linux containers, Docker engine v19.03.8. Using docker compose. I do not use gcloud for my dockerfiles...

> DT1001 dockerpycreds.errors.InitializationError: > docker-credential-gcloud not installed or not available in PATH

1. Option 1: Edit the docker configuration file and remove all gcloud entries from there.

• Windows c:/Users/<your account>/.docker/config.json

• Linux & MacOS ~/.docker/config.json

1. Option 2: Go to Troubleshoot -> Reset to factory defaults.

After this my docker compose was creating containers and running the images without any issues.

On MacOS

Step 1：

Install gcloud and docker-credential-gcr, following this tutorial

Step 2:

$ ln -s /usr/local/google-cloud-sdk/bin/docker-credential-gcr /usr/local/bin/docker-credential-gcloud

Step 3:

$ rm -rf ~/.docker

Step 4:

$ docker-compose build --pull

Finished!

Never found a way to directly resolve the docker-credential-gcloud issue, but the following got me up and running again. WARNING: the following will delete all your existing docker images and install a bunch of gcloud utilities:

1. gcloud components install docker-credential-gcr,

2. Restart the terminal completely

3. docker-credential-gcr configure-docker.

4. screen ~/Library/Containers/com.docker.docker/Data/com.docker.driver.amd64-linux/tty

5. umount /var/lib/docker/overlay2

6. rm -rf /var/lib/docker

7. Restart the terminal completely.

The new version of google-cloud-sdk has only docker-credential-gcr but not docker-credential-gcloud anymore. On the other hand one of my python packages always requested docker-credential-gcloud.

The solution was to symlink docker-credential-gcloud to docker-credential-gcr:

ln -s /path/to/google-cloud-sdk/bin/docker-credential-gcr /usr/local/bin/docker-credential-gcloud

ls -l /usr/local/bin | grep docker should now print:

...
docker-credential-gcloud -> /path/to/google-cloud-sdk/bin/docker-credential-gcr
...

Usually, this error indicates that your $PATH variable has been clobbered by a package or program you have recently installed so that the Google Cloud SDK can't be found.

$PATH is altered by many programs when they install by altering ~/.profile, ~/.bash_profile or ~/.bashrc or their non-bash equivalents. With a bad $PATH, Google Cloud SDK is configured in docker but can't be seen as executables so we get this error. This assumes you have used the Google Cloud SDK in the past, but if gcloud is configured with your docker then you probably have. Don't reinstall gcloud or disable it, you already have it on your system and that is fine.

The solution then is to fix your $PATH, not to install anything.

echo $PATH

This should be a pretty long : delimited list of directories that your files are in. Do you see a google-cloud-sdk/bin in the string? Is the string way too short given all the trouble you've gotten into in your life on this computer? You use NVM but it is missing? Use Homebrew but it is missing? Try brew from the command line, does it work?

If the answer is "no" to any of the above, inspect the files above to see if there are any new entries at the bottom of each that might have broken things. Did you just install anything new?

Something is clobbering your $PATH and you need to figure out what that is. For me it is usually something to do with Anaconda Python via the conda init command. For you it might be nvm or something else. Figure out what it is and fix the problem. Don't start over with a new $PATH and install the same stuff over again or disable gcloud authentication.

It really seems to be something with the Homebrew Cask. I uninstalled the cask and then reinstalled the Google Cloud SDK by manually downloading the tar ball and running the packaged install script as described there.

Now docker-credential-gcloud is in my path:

$ which docker-credential-gcloud
/Users/moritz/google-cloud-sdk/bin/docker-credential-gcloud

I got the issue when I tried to SSH from Google Cloud Build into an Engine VM Instance, so I had

steps:
- name: 'gcr.io/cloud-builders/gcloud'
  args: ['compute', 'ssh',
         '--project', '$PROJECT_ID',
         '--zone', 'asia-southeast1-b',
         '--strict-host-key-checking=no',
         'username@instance-1',
         '--command' ,'sh start.sh'

My start.sh

#!/bin/sh

echo "Started: $(date --iso-8601=seconds)"

docker pull gcr.io/aaa/bbbc/cccc

echo "Finished: $(date --iso-8601=seconds)"

The issue was How to set PATH when running a ssh command?

https://unix.stackexchange.com/questions/332532/how-to-set-path-when-running-a-ssh-command

So I just faced the same problem where I am trying to pull an image from GCR to an GCP instance and want to share my solution.

I ran gcloud auth configure-docker and got the warning:

WARNING: `docker-credential-gcloud\` not in system PATH.
gcloud's Docker credential helper can be configured but it will not work until this is corrected.

I applied the accepted answer for this thread and ran gcloud components install docker-credential-gcr and got a long error:

ERROR: (gcloud.components.install) You cannot perform this action because this Cloud SDK installation is managed by an external package manager.
Please consider using a separate installation of the Cloud SDK created through the default mechanism described at: https://cloud.google.com/sdk/

When no solution was working, I uninstalled the Google provided google-cloud-sdk package that was installed via snap and instlled with distro specifice package manager, for me that is apt-get as instructed in the Installing Google Cloud SDK: Installation options page and re-ran the gcloud auth configure-docker and this time it solved my problem.

In my case the problem was due to how WSL 1 works with Docker on Windows. At first I only installed and initialized gcloud in WSL Ubuntu, not in Windows. However as Docker daemon is actually run by Windows, you need to install gcloud for Windows as well (and don't forget to run all of the inits and authorizations there).

I can't figure out what Google is trying to achieve here. On Linux there is docker-credential-gcloud and on Windows there is docker-credential-gcr.exe, and then there is docker-credential-gcloud.cmd which calls gcloud auth docker-helper. This is kind of a nightmare if you're trying to write portable build scripts or gradle rules because not everything seems capable of finding and calling docker-credential-gcloud.cmd when you exec docker-credential-gcloud... it might work from the dos prompt, but in general doesn't work.

After a ton of fooling around with .bat scripts, cygwin scripts, .cmd scripts and so forth, I found the best solution was to go into the gcloud installation and just copy docker-credential-gcr.exe docker-credential-gcloud.exe ... not a very satisfying solution, but is the only thing I found that would do the trick.

On Windows 10/11, you need to ensure that C:\Users\USERNAME\AppData\Local\Google\Cloud SDK\google-cloud-sdk\bin\ is added to your system $PATH environment variable. It may not have been added if the Google Cloud SDK was not able to add it during GCloud installation. So add it manually like this:

1. Windows Task Bar ➔ Press the search icon  or the search bar
2. Type "environment" ➔ and click on "Edit the System Environment Variables" (ensure that you have Administrator access)
3. At the bottom of the dialog, click the Environment Variables... button
4. System Variables ➔ click Path ➔ Edit... ➔ New ➔ paste in C:\Users\USERNAME\AppData\Local\Google\Cloud SDK\google-cloud-sdk\bin\ (replace "USERNAME" with your username)
5. Close and restart any open Command Prompt windows.

Then verify on the Git Bash for Windows console:

1. Optional: Note that the AppData folder is hidden by default, so you may want to unhide AppData first, to see its contents.
2. Restart the Git Bash Terminal window
3. echo $PATH ➔ This should print a long string that contains: :/c/Users/USERNAME/AppData/Local/Google/Cloud SDK/google-cloud-sdk/bin
4. where docker-credential-gcloud ➔ This should print C:\Users\USERNAME\AppData\Local\Google\Cloud SDK\google-cloud-sdk\bin\docker-credential-gcloud.cmd