Detect & Record Audio in Python

Python Problem Overview

I need to capture audio clips as WAV files that I can then pass to another bit of python for processing. The problem is that I need to determine when there is audio present and then record it, stop when it goes silent and then pass that file to the processing module.

I'm thinking it should be possible with the wave module to detect when there is pure silence and discard it then as soon as something other than silence is detected start recording, then when the line goes silent again stop the recording.

Just can't quite get my head around it, can anyone get me started with a basic example.

Python Solutions

Solution 1 - Python

As a follow up to Nick Fortescue's answer, here's a more complete example of how to record from the microphone and process the resulting data:

from sys import byteorder
from array import array
from struct import pack

import pyaudio
import wave

THRESHOLD = 500
CHUNK_SIZE = 1024
FORMAT = pyaudio.paInt16
RATE = 44100

def is_silent(snd_data):
    "Returns 'True' if below the 'silent' threshold"
    return max(snd_data) < THRESHOLD

def normalize(snd_data):
    "Average the volume out"
    MAXIMUM = 16384
    times = float(MAXIMUM)/max(abs(i) for i in snd_data)

    r = array('h')
    for i in snd_data:
        r.append(int(i*times))
    return r

def trim(snd_data):
    "Trim the blank spots at the start and end"
    def _trim(snd_data):
        snd_started = False
        r = array('h')

        for i in snd_data:
            if not snd_started and abs(i)>THRESHOLD:
                snd_started = True
                r.append(i)

            elif snd_started:
                r.append(i)
        return r

    # Trim to the left
    snd_data = _trim(snd_data)

    # Trim to the right
    snd_data.reverse()
    snd_data = _trim(snd_data)
    snd_data.reverse()
    return snd_data

def add_silence(snd_data, seconds):
    "Add silence to the start and end of 'snd_data' of length 'seconds' (float)"
    silence = [0] * int(seconds * RATE)
    r = array('h', silence)
    r.extend(snd_data)
    r.extend(silence)
    return r

def record():
    """
    Record a word or words from the microphone and 
    return the data as an array of signed shorts.

    Normalizes the audio, trims silence from the 
    start and end, and pads with 0.5 seconds of 
    blank sound to make sure VLC et al can play 
    it without getting chopped off.
    """
    p = pyaudio.PyAudio()
    stream = p.open(format=FORMAT, channels=1, rate=RATE,
        input=True, output=True,
        frames_per_buffer=CHUNK_SIZE)

    num_silent = 0
    snd_started = False

    r = array('h')

    while 1:
        # little endian, signed short
        snd_data = array('h', stream.read(CHUNK_SIZE))
        if byteorder == 'big':
            snd_data.byteswap()
        r.extend(snd_data)

        silent = is_silent(snd_data)

        if silent and snd_started:
            num_silent += 1
        elif not silent and not snd_started:
            snd_started = True

        if snd_started and num_silent > 30:
            break

    sample_width = p.get_sample_size(FORMAT)
    stream.stop_stream()
    stream.close()
    p.terminate()

    r = normalize(r)
    r = trim(r)
    r = add_silence(r, 0.5)
    return sample_width, r

def record_to_file(path):
    "Records from the microphone and outputs the resulting data to 'path'"
    sample_width, data = record()
    data = pack('<' + ('h'*len(data)), *data)

    wf = wave.open(path, 'wb')
    wf.setnchannels(1)
    wf.setsampwidth(sample_width)
    wf.setframerate(RATE)
    wf.writeframes(data)
    wf.close()

if __name__ == '__main__':
    print("please speak a word into the microphone")
    record_to_file('demo.wav')
    print("done - result written to demo.wav")

Solution 2 - Python

I believe the WAVE module does not support recording, just processing existing files. You might want to look at [PyAudio][1] for actually recording. [1]: http://people.csail.mit.edu/hubert/pyaudio/

WAV is about the world's simplest file format. In paInt16 you just get a signed integer representing a level, and closer to 0 is quieter. I can't remember if WAV files are high byte first or low byte, but something like this ought to work (sorry, I'm not really a python programmer:

from array import array

# you'll probably want to experiment on threshold
# depends how noisy the signal
threshold = 10 
max_value = 0

as_ints = array('h', data)
max_value = max(as_ints)
if max_value > threshold:
    # not silence

PyAudio code for recording kept for reference:

import pyaudio
import sys

chunk = 1024
FORMAT = pyaudio.paInt16
CHANNELS = 1
RATE = 44100
RECORD_SECONDS = 5

p = pyaudio.PyAudio()

stream = p.open(format=FORMAT,
                channels=CHANNELS, 
                rate=RATE, 
                input=True,
                output=True,
                frames_per_buffer=chunk)

print "* recording"
for i in range(0, 44100 / chunk * RECORD_SECONDS):
    data = stream.read(chunk)
    # check for silence here by comparing the level with 0 (or some threshold) for 
    # the contents of data.
    # then write data or not to a file

print "* done"

stream.stop_stream()
stream.close()
p.terminate()

Solution 3 - Python

Thanks to cryo for improved version that I based my tested code below:

#Instead of adding silence at start and end of recording (values=0) I add the original audio . This makes audio sound more natural as volume is >0. See trim()
#I also fixed issue with the previous code - accumulated silence counter needs to be cleared once recording is resumed.

from array import array
from struct import pack
from sys import byteorder
import copy
import pyaudio
import wave
      
THRESHOLD = 500  # audio levels not normalised.
CHUNK_SIZE = 1024
SILENT_CHUNKS = 3 * 44100 / 1024  # about 3sec
FORMAT = pyaudio.paInt16
FRAME_MAX_VALUE = 2 ** 15 - 1
NORMALIZE_MINUS_ONE_dB = 10 ** (-1.0 / 20)
RATE = 44100
CHANNELS = 1
TRIM_APPEND = RATE / 4
    
def is_silent(data_chunk):
    """Returns 'True' if below the 'silent' threshold"""
    return max(data_chunk) < THRESHOLD
    
def normalize(data_all):
    """Amplify the volume out to max -1dB"""
    # MAXIMUM = 16384
    normalize_factor = (float(NORMALIZE_MINUS_ONE_dB * FRAME_MAX_VALUE)
                        / max(abs(i) for i in data_all))
    
    r = array('h')
    for i in data_all:
        r.append(int(i * normalize_factor))
    return r
     
def trim(data_all):
    _from = 0
    _to = len(data_all) - 1
    for i, b in enumerate(data_all):
        if abs(b) > THRESHOLD:
            _from = max(0, i - TRIM_APPEND)
            break
        
    for i, b in enumerate(reversed(data_all)):
        if abs(b) > THRESHOLD:
            _to = min(len(data_all) - 1, len(data_all) - 1 - i + TRIM_APPEND)
            break
        
    return copy.deepcopy(data_all[_from:(_to + 1)])
 
def record():
    """Record a word or words from the microphone and 
    return the data as an array of signed shorts."""

    p = pyaudio.PyAudio()
    stream = p.open(format=FORMAT, channels=CHANNELS, rate=RATE, input=True, output=True, frames_per_buffer=CHUNK_SIZE)

    silent_chunks = 0
    audio_started = False
    data_all = array('h')

    while True:
        # little endian, signed short
        data_chunk = array('h', stream.read(CHUNK_SIZE))
        if byteorder == 'big':
            data_chunk.byteswap()
        data_all.extend(data_chunk)

        silent = is_silent(data_chunk)

        if audio_started:
            if silent:
                silent_chunks += 1
                if silent_chunks > SILENT_CHUNKS:
                    break
            else: 
                silent_chunks = 0
        elif not silent:
            audio_started = True              

    sample_width = p.get_sample_size(FORMAT)
    stream.stop_stream()
    stream.close()
    p.terminate()

    data_all = trim(data_all)  # we trim before normalize as threshhold applies to un-normalized wave (as well as is_silent() function)
    data_all = normalize(data_all)
    return sample_width, data_all

def record_to_file(path):
    "Records from the microphone and outputs the resulting data to 'path'"
    sample_width, data = record()
    data = pack('<' + ('h' * len(data)), *data)

    wave_file = wave.open(path, 'wb')
    wave_file.setnchannels(CHANNELS)
    wave_file.setsampwidth(sample_width)
    wave_file.setframerate(RATE)
    wave_file.writeframes(data)
    wave_file.close()

if __name__ == '__main__':
    print("Wait in silence to begin recording; wait in silence to terminate")
    record_to_file('demo.wav')
    print("done - result written to demo.wav")

Solution 4 - Python

import pyaudio
import wave
from array import array

FORMAT=pyaudio.paInt16
CHANNELS=2
RATE=44100
CHUNK=1024
RECORD_SECONDS=15
FILE_NAME="RECORDING.wav"

audio=pyaudio.PyAudio() #instantiate the pyaudio

#recording prerequisites
stream=audio.open(format=FORMAT,channels=CHANNELS, 
                  rate=RATE,
                  input=True,
                  frames_per_buffer=CHUNK)

#starting recording
frames=[]

for i in range(0,int(RATE/CHUNK*RECORD_SECONDS)):
    data=stream.read(CHUNK)
    data_chunk=array('h',data)
    vol=max(data_chunk)
    if(vol>=500):
        print("something said")
        frames.append(data)
    else:
        print("nothing")
    print("\n")
    
    
#end of recording
stream.stop_stream()
stream.close()
audio.terminate()
#writing to file
wavfile=wave.open(FILE_NAME,'wb')
wavfile.setnchannels(CHANNELS)
wavfile.setsampwidth(audio.get_sample_size(FORMAT))
wavfile.setframerate(RATE)
wavfile.writeframes(b''.join(frames))#append frames recorded to file
wavfile.close()

I think this will help.It is a simple script which will check if there is a silence or not.If silence is detected it will not record otherwise it will record.

Solution 5 - Python

The pyaudio website has many examples that are pretty short and clear: http://people.csail.mit.edu/hubert/pyaudio/

Update 14th of December 2019 - Main example from the above linked website from 2017:


"""PyAudio Example: Play a WAVE file."""

import pyaudio
import wave
import sys

CHUNK = 1024

if len(sys.argv) < 2:
    print("Plays a wave file.\n\nUsage: %s filename.wav" % sys.argv[0])
    sys.exit(-1)

wf = wave.open(sys.argv[1], 'rb')

p = pyaudio.PyAudio()

stream = p.open(format=p.get_format_from_width(wf.getsampwidth()),
                channels=wf.getnchannels(),
                rate=wf.getframerate(),
                output=True)

data = wf.readframes(CHUNK)

while data != '':
    stream.write(data)
    data = wf.readframes(CHUNK)

stream.stop_stream()
stream.close()

p.terminate()

Solution 6 - Python

You might want to look at csounds, also. It has several API's, including Python. It might be able to interact with an A-D interface and gather sound samples.

Content Type	Original Author	Original Content on Stackoverflow
Question	Sam Machin	View Question on Stackoverflow
Solution 1 - Python	cryo	View Answer on Stackoverflow
Solution 2 - Python	Nick Fortescue	View Answer on Stackoverflow
Solution 3 - Python	eugene	View Answer on Stackoverflow
Solution 4 - Python	deenu	View Answer on Stackoverflow
Solution 5 - Python	simjega	View Answer on Stackoverflow
Solution 6 - Python	S.Lott	View Answer on Stackoverflow