Adding HTML entities using CSS content
HtmlCssHtml EntitiesCss ContentHtml Problem Overview
How do you use the CSS content
property to add HTML entities?
Using something like this just prints
to the screen instead of the non-breaking space:
.breadcrumbs a:before {
content: ' ';
}
Html Solutions
Solution 1 - Html
You have to use the escaped unicode :
Like
.breadcrumbs a:before {
content: '\0000a0';
}
More info on : http://www.evotech.net/blog/2007/04/named-html-entities-in-numeric-order/
Solution 2 - Html
CSS is not HTML.
is a named character reference in HTML; equivalent to the decimal numeric character reference  
. 160 is the decimal code point of the NO-BREAK SPACE
character in Unicode (or UCS-2; see the HTML 4.01 Specification). The hexadecimal representation of that code point is U+00A0 (160 = 10 × 161 + 0 × 160). You will find that in the Unicode Code Charts and Character Database.
In CSS you need to use a Unicode escape sequence for such characters, which is based on the hexadecimal value of the code point of a character. So you need to write
.breadcrumbs a:before {
content: '\a0';
}
This works as long as the escape sequence comes last in a string value. If characters follow, there are two ways to avoid misinterpretation:
a) (mentioned by others) Use exactly six hexadecimal digits for the escape sequence:
.breadcrumbs a:before {
content: '\0000a0foo';
}
b) Add one white-space (e. g., space) character after the escape sequence:
.breadcrumbs a:before {
content: '\a0 foo';
}
(Since f
is a hexadecimal digit, \a0f
would otherwise mean GURMUKHI LETTER EE
here, or ਏ if you have a suitable font.)
The delimiting white-space will be ignored, and this will be displayed foo
, where the displayed space here would be a NO-BREAK SPACE
character.
The white-space approach ('\a0 foo'
) has the following advantages over the six-digit approach ('\0000a0foo'
):
- it is easier to type, because leading zeroes are not necessary, and digits do not need to be counted;
- it is easier to read, because there is white-space between escape sequence and following text, and digits do not need to be counted;
- it requires less space, because leading zeroes are not necessary;
- it is upwards-compatible, because Unicode supporting code points beyond U+10FFFF in the future would require a modification of the CSS Specification.
Thus, to display a space after an escaped character, use two spaces in the stylesheet –
.breadcrumbs a:before {
content: '\a0 foo';
}
– or make it explicit:
.breadcrumbs a:before {
content: '\a0\20 foo';
}
See CSS 2.1, section "4.1.3 Characters and case" for details.
Solution 3 - Html
Update: PointedEars mentions that the correct stand in for
in all css situations would be
'\a0 '
implying that the space is a terminator to the hex string and is absorbed by the escaped sequence. He further pointed out this authoritative description which sounds like a good solution to the problem I described and fixed below.
What you need to do is use the escaped unicode. Despite what you've been told \00a0
is not a perfect stand-in for
within CSS; so try:
content:'>\a0 '; /* or */
content:'>\0000a0'; /* because you'll find: */
content:'No\a0 Break'; /* and */
content:'No\0000a0Break'; /* becomes No Break as opposed to below */
Specifically using \0000a0
as
.
If you try, as suggested by mathieu and millikin:
content:'No\00a0Break' /* becomes No਋reak */
It takes the B into the hex escaped characters. The same occurs with 0-9a-fA-F.
Solution 4 - Html
In CSS you need to use a Unicode escape sequence in place of HTML Entities. This is based on the hexadecimal value of a character.
I found that the easiest way to convert symbol to their hexadecimal equivalent is, such as from ▾ (▾
) to \25BE
is to use the Microsoft calculator =)
Yes. Enable programmers mode, turn on the decimal system, enter 9662
, then switch to hex and you'll get 25BE
. Then just add a backslash \
to the beginning.
Solution 5 - Html
Use the hex code for a non-breaking space. Something like this:
.breadcrumbs a:before {
content: '>\00a0';
}
Solution 6 - Html
There is a way to paste an nbsp
- open CharMap and copy character 160. However, in this case I'd probably space it out with padding, like this:
.breadcrumbs a:before { content: '>'; padding-right: .5em; }
You might need to set the breadcrumbs display:inline-block
or something, though.
Solution 7 - Html
For Example :
http://character-code.com/arrows-html-codes.php
Example: If you want select your character , I selected "↬" "↬" (We use HEX values)
.breadcrumbs a:before {
content: '\0021ac';
}
Result: ↬
Thats it :)
Solution 8 - Html
Here are two ways:
In HTML:
```<div class="ics">⛱</div>```
This will result into ⛱
-
In Css:
.ics::before {content: "\9969;"}
with HTML code <div class="ics"></div>
This also results in ⛱
Solution 9 - Html
I know this is an pretty old post, but if spacing is all your after, why not simply:
.breadcrumbs a::before {
content: '>';
margin-left: 8px;
margin-right: 8px;
}
I have used this method before. It wraps perfectly fine to other lines with ">" by its side in my testing.